Tefal or Philips iron, which is better?

Comparison Tefal vs Philips

Tefal and Philips are worthy brands that produce quality products. But of course there are differences in these brands. The first thing we pay attention to when choosing an iron is the sole. It comes in ceramic and metal-ceramic. Tefal's most popular ones are Durilium, Ultragliss and Autoclean Catalys. Philips has the most popular sole with Steam Glide technology - this is the company's own development, which combines all the best features of Tefal soles: ease of sliding, scratch resistance and high wear resistance.

The second important point when choosing an iron is its steam features. When purchasing, be sure to pay attention to the number and location of steam holes. Both manufacturers, of course, equipped their products with a steam function, but Tefal can be considered more “advanced” in this regard. Thanks to special grooves for steam, where it collects, a so-called steam cushion is created, which will become simply indispensable when ironing delicate fabrics.

In principle, these are all the differences between these brands. Tefal and Philips irons use a “drop-stop” leak protection system, auto shut-off, have a fairly wide range of power from 350 to 2600 W, ergonomic handles and are light weight.

Advantages and disadvantages of PHILIPS

The advantages include:

• SteamGlide sole – we already mentioned it above
• Calc Clean anti-scale function
• large water tank (400 ml) – you will have to stop ironing less often
• adding water at any time, without disconnecting from the network.

We identified the following as disadvantages:

• lower power of the device itself (2400 W) and steam boost (170 g/min)
• manual adjustment of steam modes
• production in China

Advantages and disadvantages of Tefal

Advantages:

• iron power 2600 W and powerful steam boost (200 g/min)
• Autoclean Durilium AirGlide - although it is inferior in strength, it glides perfectly and easily
• automatic adjustment of steam supply - just set the required type of fabric
• convenient steam spout - it can easily iron out even wrinkles near buttons
• production in France
• Anti-scale system (scale protection)

Flaws:

• There is no way to add water without turning off the iron
• it is heavier (1.5 kg compared to 1.2 kg PHILIPS) - this will be noticeable during prolonged use.

In all other respects, the irons of the two competing brands turned out to be identical: there are energy saving modes, automatic shutdown, protection against leakage, even the cord length is the same - 2 meters. In addition to technical characteristics, when choosing an iron, remember that you will use it very often, so you should like the color, design, handle material, it should fit comfortably in your hand and not be heavy. Best of all, before purchasing, go to the store and take a closer look at the models pre-selected on the list of your favorites, “live.”

TOP 10 best iron

The list of the best models includes:

• Morphy Richards 303131.
• Philips GC4555/80 Azur.
• Morphy Richards 305003.
• Philips GC4909/60 Azur.
• Tefal FV1849 Maestro 2.
• Philips GC4902/20 Azur.
• Philips GC4556/20 Azur.
• Rowenta DW4130D1.
• Tefal FV1712.
• Braun TexStyle 7 TS765A.

Let's move on to studying the presented devices.

Morphy Richards 303131

The iron effectively smoothes any type of fabric. The sole is resistant to mechanical damage and stress, as it is made of durable and high-quality metal ceramics. For safety in everyday use, the device automatically turns off after prolonged inactivity.

For long-term work without interruption there is a water tank with a significant volume. The iron is connected to a standard electrical network with a voltage of 220 V. The model retains its performance properties for many years. The outsole with three special zones effectively eliminates wrinkles in clothes.

Price: from 5,125 to 6,350 rubles.

Morphy Richards 303131

Advantages

• iron sole made of metal ceramics;
• water container 400 ml;
• automatic shutdown after prolonged inactivity.

Flaws

• not detected.

Easy to use iron with good reviews and many additional features. The price of the model is now very affordable; last year I saw it cost a thousand more. I personally am very pleased that the iron is quite lightweight, but at the same time has a very powerful steam boost and vertical steam function. In general, it has everything I needed, I am very pleased with the purchase.

Philips GC4555/80 Azur

The power of the iron is 2,400 W. Thanks to this, it heats up quickly and provides excellent ironing results, including when working with items hanging on hangers. The rubberized handle is comfortable to hold in the palm of your hand, confidently controlling every movement.

The base of the SteamGlide Plus is made of durable material that is difficult to scratch. It glides well on various fabrics. This model features a Quick Calc Release system. It allows you to remove limescale with minimal time and, accordingly, increase productivity and extend the service life of the device.

Price category: from 3,850 to 4,700 rubles.

Philips GC4555/80 Azur

Advantages

• Availability of Quick Calc Release system;
• comfortable rubberized handle;
• light weight (1.6 kg).

Flaws

• not found.

Everything suits you! A good iron for home use. Ironing quality, power, weight, ease of use. This model left only good emotions! I really like Philips devices. The previous comrade worked for 8 years and is still alive. But we decided to buy a new Philips GC4555 iron to replace the old man. Just a plane, not a device. Gorgeous color scheme. It sank into my soul so much that I couldn’t imagine that any iron would be better than this model.

Morphy Richards 305003

The iron has a blue casing and is a powerful and easy-to-use device that will make you love the ironing process. Its power corresponds to 2400 W, and the steam boost reaches 230 g/min, which will allow you to smooth out wrinkles on several layers of clothing.

Continuous steam supply occurs at a pressure of 1.5 bar at a speed of 50 g/min thanks to the built-in pump. This allows the steam to penetrate deeper into the fabric, effectively removing wrinkles. The ceramic soleplate supports Aeroglide technology, which distributes steam evenly over the entire surface, which helps create a steam cushion.

The peculiarity of the model lies in its design, which involves the presence of a display and control buttons on the front side of the case. Using the buttons, you can turn on continuous steam mode, use a burst of steam, and also turn on the backlight in the spout area so you can see small wrinkles. To connect the device, a 3 m long cord is used.

Cost: from 5,990 to 7,150 rubles.

Morphy Richards 305003

Advantages

• steam boost 230 g/min;
• The iron sole supports Aeroglide technology;
• presence of a display.

Flaws

• not detected.

I decided to buy an iron to replace my old one. I purchased this model. Overall I'm pleased. I like the device. Works well, heats up quickly. The sole does not stick, as the temperature is automatically regulated and it is impossible to burn things. Even thin fabrics are ironed well, you are not afraid that you will burn through the material and have to throw the item away. I advise you to buy this device. It is really worth the money, high quality and reliable.

Philips GC4909/60 Azur

This iron will make ironing quick and efficient. High power allows it to heat up to operating temperature in a matter of seconds. In addition, it maintains stable steaming performance in all operating modes. Deep tissue hydration helps to cope with the most stubborn folds and creases.

You may be interested in: TOP 10 best electric kettle Redmond: rating, which one to choose and buy, characteristics, reviews, pros and cons

A special collector collects scale, preventing damage to the heater and clogging of the capillaries. It can be cleaned in 15 seconds by rinsing under the tap. An iron left on the stand will turn off on its own. The automation will work after 2 minutes if it is in a horizontal position or after 8 minutes if it is in a vertical position.

The SteamGlide Elite sole stays smooth and distributes heat evenly. It glides easily over delicate materials, maintaining their shape and texture. A special valve limits the water supply at low temperatures, preventing the iron from leaking and damaging the fabric.

The extra-long spout with steam holes helps you gently remove creases between buttons, collars and other hard-to-reach areas. The iron is equipped with a non-slip handle, a swivel cord and a wide stand. Its capacious tank is designed for long continuous operation.

Price: from 5,990 to 7,400 rubles.

Philips GC4909/60 Azur

Advantages

• automatic shutdown when inactive;
• a special manifold prevents damage to the heater;
• non-slip handle.

Flaws

• not found.

I got this iron. For me it is good because the weight is felt in the hand. Since childhood, I have become accustomed to heavy appliances, and modern lightweight versions make me mistrust on a subconscious level. The same iron feels “weighty”, but not heaviness. In addition, the vertical steaming function is important to me, which this model copes with excellently. In general, I am very pleased with the iron, how I feel about it and, of course, the quality of ironing.

Tefal FV1849 Maestro 2

The iron has a steam supply function of up to 35 g/min. If this is not enough for you, then turn on the “Steam boost” for a short time. In this mode, steam is supplied intensively - up to 120 g/min. The ergonomic steam button is located next to the index finger - under the handle, which is very convenient.

The ceramic soleplate of the iron glides easily over the fabric and does not stick due to its non-stick properties. And its size will allow you to iron large items without spending a lot of time on it. The model is equipped with an auto shut-off system. In a vertical position, the device will turn off after 8 minutes of inactivity, and in a horizontal position - after 30 seconds.

Price category: from 1,550 to 2,780 rubles.

Tefal FV1849 Maestro 2

Advantages

• auto shutdown system;
• light weight (1.22 kg);
• ergonomic steam button.

Flaws

• short cord (1.95 m.)

My husband gave me a gift. I gave a Tefal Maestro 2 iron. I will say this, if you want the iron to perform all the basic functions, then this is a good option. The sole is ceramic – it irons well. The steam function steams perfectly. The water bay is conveniently located and large. The length of the cord may seem a bit short to some, but it’s just right for me. Doesn't cool down quickly. Personally, water in my iron did not flow out anywhere, but I did not fill it so much that it flowed from all the cracks. Small in size, not too heavy, easy to hold while ironing. The main thing is to carefully check for external damage when purchasing. When I bought it, I immediately changed it because there was a scratch on the sole.

Philips GC4902/20 Azur

A powerful model that heats up to operating temperature in a few seconds. High steaming performance allows it to quickly deal with the most stubborn folds and creases on thick fabrics. SteamGlide Elite coating reliably protects metal from scratches and other damage. Thanks to this, the iron glides easily over the surface of the fabric, maintaining its shape and pleasant texture.

An iron forgotten on a stand is just a minor nuisance. It will automatically turn off if left for 2 minutes in a horizontal position or 8 minutes in a vertical position. A special collector collects mineral deposits, preventing them from getting onto the heater and into the steam holes. It can be cleaned in a few seconds by rinsing it under the tap. The non-slip handle, wide, stable stand and rotating cord mount make the iron very convenient to use.

You will be interested in: TOP 10 best high pressure washer: rating, which one to choose and buy, characteristics, reviews, pros and cons

Cost: 7,800 to 10,300 rubles.

Philips GC4902/20 Azur

Advantages

• heating to operating temperature in a few seconds;
• scale protection;
• High-strength SteamGlide Elite outsole.

Flaws

• The kit does not include a glass for filling the device with water.

This is my first experience using the Philips brand, before that I had a Tefal iron. I was thinking about which iron was better to buy. The main criteria when choosing a device were: anti-drip system, easy ironing, scale protection, slip resistance, long cord. All of the above can be attributed to this model. I have never experienced such delicate ironing in my life. Thanks to the consultants for help in choosing. Now I am the happy owner of this model. I have never held an iron in my hand so comfortably or steamed things so quickly. The glide is incomparable to ceramics, the nose is incredibly comfortable. Thanks to the creators of Philips!

Philips GC4556/20 Azur

The iron is very comfortable to use thanks to the rubberized handle, which fits well in the palm of your hand, and the swivel fastening of the power cord. 2,500 W power ensures fast heating. The Steel Glide sole glides well over fabric, and you can use a burst of steam to smooth out tough creases. This model features the Quick Calc Release anti-scale system.

The limescale particles are broken down and collected in a special container, which is then removed, cleaned and replaced. This allows you to significantly increase the service life of the household appliance. If the device is not used for some time, it will turn off automatically to reduce energy consumption and reduce the likelihood of an accident to zero.

Price: from 6,170 to 10,300 rubles.

Philips GC4556/20 Azur

Advantages

• SteamGlide Plus sole;
• Quick Calc Release anti-scale system;
• steam boost 220 g/min.

Flaws

• short cord (2 m).

My old Philips GC4914 iron began to act up. The temperature sensor constantly turned off during operation. I had to shake it or unplug it. Ironing became a pain. It's time to buy a new iron for your home. I settled on this model. After reading the specifications and reviews I decided to buy it. I really liked the iron. For me, normal is not heavy. Good glide. Eco mode has low water consumption. There is something to compare with. In my old Philips, two sets of bedding required two 350 ml glasses. In this one, half a glass in eco mode, a little more in normal mode. Convenient dial-switch. After 8 minutes of inactivity, the auto shut-off mode is activated and the red light on the iron handle flashes. I advise you to buy.

Rowenta DW4130D1

The iron will carefully and effectively handle the most stubborn creases. Simply set the fabric type using the rotary control, and the automatic steam supply system will select the optimal “pressure force”. In particularly difficult situations, a steam boost (150 g/min) will help. The water reservoir holds 250 ml, so you won't have to worry about refilling it too often, even when ironing bulky bedding and bath towels.

The Microsteam 300 Lase outsole is easy to glide. Three hundred holes are specially located on its surface so that the fabric is moistened evenly. The tapered nose allows you to smooth out hard-to-reach areas around buttons and along seams. Thanks to the anti-drip protection, your laundry will be stain-free. There is a self-cleaning system.

Price category: from 1,450 to 2,180 rubles.

Rowenta DW4130D1

Advantages

• light weight (1.19 kg)
• self-cleaning system;
• drop protection.

Flaws

• The kit does not include a container for refilling the device with water.

Gifted by my husband. There were doubts regarding the quality of the sole and its material. I started using it - everything is fine. Works great with all types of fabric, including delicates and baby items. Good steam supply. Heats up quickly. Easy to clean. I'm happy with the gift. I recommend purchasing.

Tefal FV1712

An iron with a non-stick sole and a steam boost of 85 g will become an indispensable appliance in everyday life. It can easily cope with any creases and smooth out even the most complex folds. The water spray will evenly moisten the fabric, and the anti-drip system will ensure that excess liquid does not leak out of the steam holes.

The vertical steaming mode treats any clothing as gently as possible and allows you to tidy up textiles without removing them. When there is a lot of scale, the device will clean itself of it. The 1.9 m long cord makes it possible not to be tied to an outlet, and the light indication will indicate when the device is ready for use.

You may be interested in: Rating of the best hair straighteners: with titanium, tourmaline, ceramic coating

Cost: from 999 to 1,570 rubles.

Tefal FV1712

Advantages

• light weight (1 kg);
• anti-drip system;
• self-cleaning function.

Flaws

• short power cord (1.9 m).

The most important thing in irons is a good sole that does not burn and a thin spout for ironing thin fabrics. This model from Tefal is all right with these factors. It not only irons well, but also steams in a vertical position, so it replaces two devices at once. Excellent inexpensive iron.

Braun TexStyle 7 TS765A

With a relatively low power consumption, the iron provides a sufficiently high steam supply, which allows you to iron out products with a complex sewing structure and multiple folds. The soleplate is designed for efficient use of a combination of ironing and steaming. The device is made with a comfortable rubberized handle, which prevents your hand from slipping and increases convenience when ironing items with complex sewing.

The length of the power cord allows you to make any movements with the iron on the ironing board without restrictions, and the hinged fastening of the cord prevents it from being damaged during long-term use. The model is equipped with a light indication of readiness for work and is equipped with a self-cleaning system for descaling. In addition, its light weight allows you to make the necessary movements effortlessly, even with a fully filled water spray container.

Price: from 2,490 to 3,700 rubles.

Braun TexStyle 7 TS765A

Advantages

• light indication of readiness for operation;
• water container volume 400 ml;
• Saphir sole.

Flaws

• not found.

The iron is good, the reviews are only positive. The previous iron was also Braun and lasted 12 years. And if it weren’t for its next flight to the floor (my daughter touched the ironing board), I would have used it for a very long time. But now it will serve me at the dacha, where I can use it like that - it leaks a little. Therefore, there was no doubt about choosing a model, only Braun! And I advise you!!!

Review of popular brands of irons

Let's look at irons from four leading companies that compete with each other in the consumer household appliances market, and help you figure out which iron model is best for you.

Tefal

The French company Tefal has been on the Russian market since 1982. It represents a large range of household appliances, from vacuum cleaners to all kinds of kitchen appliances. Irons of this brand have high quality and performance capabilities.

The basis of any ironing unit is a heated work surface. In modern products, Tefal uses ceramics and cermets. The first is used in devices at a lower price level. Ceramics heats up quickly, is light in weight, and glides well over the surface of the fabric. The only drawback to using it is its fragility.

How to choose an iron

In order for the iron to become a real assistant and significantly facilitate the ironing process, it is necessary to take into account before purchasing that a good iron must have:

With long cord

The longer the iron cord, the more convenient the ironing process. The long cord does not restrict movement and allows you to approach the ironing board from different directions. Irons that not only have an elongated cord, but also the ability to rotate it around its axis are very convenient.

Comfortable in the hand

Before buying an iron, it is advisable to try on whether it is comfortable for you to hold the iron and whether it fits well in your hand. If this is not possible, then you should pay attention to irons from those manufacturers who pay attention to the ergonomics of the product, which means they make it more convenient and safe to use, and minimize the slipping of the palm from the handle of the iron. This could be a specially shaped handle, a handle with finger grooves, or a handle with a special coating.

The iron should heat up quickly

The heating speed of the iron directly depends on the power. But when choosing an iron with high power (2000 W - 2400 W), you should think about whether you really need such an expensive unit that consumes a lot of electricity, and whether it will pay off. Iron models with power up to 1500 W take significantly longer to heat up than their more powerful counterparts. The best option are irons whose power value is in the range of 1600 - 1800 W.

The best inexpensive irons for the home

Braun SI 3041 GR

Inexpensive iron from a famous brand of household appliances. Ready to work at maximum mode 35 seconds after switching on. The power of this iron is 2.35 kW, which is quite decent for the budget model segment. There are all the basic classic functions, nothing extra. The device is equipped with a temperature regulator, water spray and steam generator. The water tank has a volume of 270 ml. The sole is coated with ceramic, with easy sliding. The brand is German, made in China, warranty – 2 years. Main advantages:

• Vertical and horizontal steam treatment.
• Decent steam boost – 150 g/min.
• Steam supply – up to 45 g/min (adjustable).
• Tapered spout for ironing folds, pintucks, areas around buttons, etc. Many small holes on the spout for steam supply.
• Anti-drop.
• Sole self-cleaning function.
• Descaling system (scale removal rod).
• Possibility to choose from several body colors, as well as between two handle shapes.
• Light weight - 1.2 kg.

Minuses:

• No auto shut off.
• Noisy steam supply (according to customer reviews).
• The ceramic coating on the sole is prone to scratches.

Models in the line:

• Braun SI 3030 PU- 2300 W, steam boost 140 g/min
• Braun SI 3054 GY- 2400 W, steam boost 180 g/min, automatic shut-off
• Braun SI 3055 Bk- 2400 W, steam boost 180 g/min, vertical steaming, automatic shut-off

Panasonic NI-E510TDTW

When you need a good iron for your home and your budget is limited, there is no need to try to play the lottery with typical Chinese products. Available options are available from a range of serious companies. In particular, the Panasonic brand has released perhaps the best inexpensive iron for the home. And a low price tag is not at all a sign of some kind of primitivism.

The NI-E510TDTW iron is equipped with an automatic anti-scale system and supports vertical steaming function. The silver titanium-coated non-stick soleplate has a teardrop shape for easy movement in any direction.

The presence of 29 holes and a U-shaped groove ensures better distribution of heat and steam over the surface of the fabric. As a result, it softens, and complex folds are smoothed out faster and easier.

Models in the line:

• Panasonic NI-E510TDTW - blue;
• Panasonic NI-E610TVTW - purple;
• Panasonic NI-E410TMTW - blue. The most inexpensive iron in the line, lower power (up to 2150 W), without a burst of steam.

Main advantages:

• Light weight, good maneuverability;
• Fast heating;
• Power consumption – 1950-2380 W;
• Adjustable steam – up to 25 g/min.;
• Steam boost – 84 g/min.

Advantages and disadvantages

For comparison, we will select two popular models from both brands - Philips GC4850 and Tefal FV5375 . Their performance characteristics are quite similar.

Both steam generators have sprinklers, descaling systems, etc. Judging by consumer reviews, both steam generators provide excellent care for ironing. The devices glide perfectly over the fabric without catching or damaging.

The Philips model has a Steamglide Plus type sole, while the Tefal model has an Autoclean Cathalys sole.

The Autoclean Cathalys outsole is made from Durilium . A thin layer of palladium is sprayed onto its surface.

As a result, when organic substances present on the fabric come into contact with the sole, a chemical reaction occurs. Water and a small amount of carbon dioxide are released, which automatically cleans the surface.

The Steamglide Plus sole of Philips models, thanks to holes of different shapes and sizes, creates an air cushion above the fabric.
Ironing occurs with virtually no contact between the sole and the fabric. Among the advantages of the Philips GC 4850 it should be noted:

• ergonomic design, thanks to which the steam generator is easy to use without getting tired from ironing;
• powerful steam generation, ensuring smoothing of even the most difficult wrinkles.

Tefal FV5375 is appreciated by consumers for:

• fast heating;
• accurate operation of the self-shutdown system.

In terms of the last parameter, Tefal outperforms Philips. This is where its advantages end.

Moreover, the list of consumer complaints regarding devices from Tefal is quite long:

• the steam generator has difficulty ironing even ordinary shirts;
• weak heating, which does not correspond to that declared by the manufacturer, due to which even for synthetics it is necessary to set the maximum heating temperature;
• The cord is not long enough;
• long cooling;
• possibility of stains appearing on the fabric.

The last disadvantage, however, is associated with consumers’ non-compliance with the rules for operating steam generators.

A common drawback of both devices is the need to add water, since with a large enough tank it is only enough to iron 3-4 things.