Rating of the TOP 16 best pumping stations for a dacha and private home: which one to choose, characteristics, manufacturers, pros and cons

Design features of the equipment

Existing pumping stations differ in design, since models are produced for domestic and industrial use. Powerful devices use wide frames. Models with a protected electric motor are suitable for dachas, but special features are taken into account.

1. Hydraulic accumulator type.
2. Dimensions of the structure.
3. Pressure gauge and other instruments.
4. Volume of the container for storing water.
5. Type of pressure switch.
6. Pumps are installed in the front, however there are exceptions. Surface units are the most common, submersible stations are considered less frequently.

What is better: a pumping station or a submersible pump?

For autonomous water supply at the dacha, in addition to pumping stations, submersible models are considered and it is necessary to analyze all their features. The first and second options are suitable for supplying water, but the following nuances are taken into account:

1. Distance to the source.
2. Well diameter.
3. Water purity.
4. Pressure level.
5. Pump installations are more common because they demonstrate stable operation. They are more convenient to maintain. Submersible pumps, in turn, are effective in the industrial sector, where water is extracted from deep wells and large volumes are required.

Selecting a model based on specific characteristics

When a person is faced with choosing a product, he will learn about many characteristics that affect the cost. Manufacturers work according to an individual strategy, but basic indicators are taken into account:

1. Tank size.
2. Water pressure.
3. Operating power.
4. Mains voltage.
5. Water intake depth.

Calculation of pump performance

Before purchasing products, a performance calculation is made. For this purpose, the chemical composition of wastewater and the amount of precipitation are taken into account. An on-site specialist determines the height of the liquid rise. The pump must cope with the increased pressure. In populated areas, this parameter is unstable, so there is a large load on the electric motor. The average model with a power of 1200 watts provides a throughput of 4 cubic meters per hour. If the diving depth is less than 10 meters, 1000 watt equipment is enough. Compact models are produced with an average power of 800 watts.

Maximum water intake depth

Pumping stations are capable of operating in wells of different depths. The standard model is sold with a pumping capacity of up to 10 meters. Sometimes the groundwater level exceeds this mark and more powerful pumps are used. If we consider 800-watt models, they have a throughput of 3.7 cubic meters per hour and draw water from a depth of 9 meters. There are universal models with a pressure of more than 30 meters, their power is 4000 watts, and a productivity of 40 liters per minute is provided.

Hydraulic accumulator tank volume

A hydraulic accumulator tank is otherwise called an expansion tank or a membrane tank. The main task is to maintain stable pressure that is created in the water supply. Automatic stations are produced with various protections; the pressure is shown through a pressure gauge. Problems with pressure surges are often associated with the electric motor. There are devices on the market with hydraulic accumulators with a capacity of 10 liters or more. If we consider an 800 W model, it can use a 20-25 liter tank. More powerful products are equipped with 30 liter expanders. The choice of hydraulic accumulator depends on various factors.

1. Relay operation frequency.
2. Electric motor reliability.
3. Pump activation system.
4. Average pressure in the system.
5. Water compressibility coefficient.
6. Fluid flow rate.

Water pressure in the system

One of the most important characteristics of the product is water pressure. Not everyone is familiar with setting up equipment. Before purchasing, it is important to determine the flange adjustment and learn the principles for eliminating malfunctions. The pressure in the pipeline changes, so the main task is to ensure stable pressure. Mid-price devices provide a pressure of 40 meters. Units with a 20-liter hydraulic accumulator are more productive, much depends on the engine. Considering small wells, a pressure of 25 meters is enough. If we are talking about deep wells (more than 5 m), the figure should be more than 40 meters. When calculating pressure, the following characteristics are taken into account:

1. Hydraulic accumulator volume.
2. Maximum suction depth of the pump.
3. Motor power.
4. Equipment set.

Power and voltage

Manufacturers provide a wide range and there is plenty to choose from. Stations differ in power and voltage, much depends on the area of ​​use. Not only synchronous, but also asynchronous AC motors with voltages of 220, 380 volts and more are presented. Power starts from 500 watts. Various protections are offered, the buyer pays attention to the following features:

1. Rotor winding.
2. Number of phases.
3. Availability of starting devices. If there are problems with the network at the dacha, it is better to use protected stations that are not afraid of short circuits. The most common are pumps with asynchronous motors, with a rated power of 800 W or more. Such models operate at a voltage of 220 volts, they are suitable for pumping clean. You can hope for a capacity of 60 liters per minute and provide a pressure of more than 30 liters.

Unit type and functionality

Stations are classified according to different features. First of all, the type of water is taken into account - it can be clean, slightly polluted, or dirty. Universal models are sold, and consumers evaluate the type of case. Various materials are offered in this regard:

1. Alloy of aluminum and steel.
2. Brass.
3. Stainless steel.
4. Aluminium alloy.
5. Plastic. Models are supplied with a 5 and 25 liter hydraulic accumulator. The pressure parameter depends on the relay. In 2021, users often prefer devices with remote control. There are interesting products from European manufacturers with high-quality centrifugal pumps. Self-priming models are used with or without a filter. Additionally, the devices differ in the size of the connected pipe. The pump is provided with 1, 1.2, 1.5 inch connectors. The hydraulic accumulator is also made of different materials; interesting models with an aluminum or brass tank are offered.

Design and principle of operation of the pumping station

Is the pumping station any different from a conventional electric pump and, if so, what are its advantages?

Firstly, the pumping station is capable of providing good pressure necessary for a complete water supply to the house and site.

Secondly, this system is fully automated and can operate without constant control from the owner - once installed, you don’t have to think about it until the time for preventive inspection and testing comes.

An informed choice of a pumping station will be impossible if you do not pay due attention to its design and basic components.

The main structural elements of the pumping station are an interconnected surface pump and a hydraulic accumulator (pressure hydraulic tank), as well as an automatic pressure switch that controls the operation of the pump. This is not enough for the autonomous functioning of the system. But we will talk about the purpose and design of additional components a little later, but now we will focus our attention on the main design elements.

Pumping station design

1. Electrical unit. 2. Outlet fitting. 3. Inlet fitting.

4. Electric motor. 5. Pressure gauge. 6. Pressure switch.

7. Hose connecting the pump and receiver. 8. Hydraulic accumulator. 9. Legs for fastening.

The “heart” of a pumping station is the pump. The structural type of the pump used can be almost any - vortex, rotary, screw, axial, etc. – but for domestic water supply, as a rule, centrifugal type pumps are used, characterized by their simplicity of design and high efficiency.

The second important structural element of the pumping station - the hydraulic accumulator - is, in fact, a storage tank (which actually follows from its name). However, the purpose of a hydraulic accumulator is not only to accumulate injected water.

Without this element, the pump would turn on/off too often - every time the user turns the tap on his faucet. The absence of a hydraulic accumulator would also negatively affect the water pressure in the system - water would either flow from the tap in a thin stream, or it would gush out in a too violent stream.

How can a pump, accumulator and pressure switch, put together, automatically provide us with water?

Let's understand the principle of operation of the pumping station.

When turned on, the pump begins to pump water, filling the storage tank with it. The pressure in the system gradually increases. The pump will operate until the pressure reaches the upper threshold value. When the preset maximum pressure is reached, the relay will operate and the pump will turn off.

What happens when the user turns on the kitchen faucet or starts taking a shower? Water consumption will lead to gradual emptying of the accumulator, and therefore to a decrease in pressure in the system. When the pressure drops below the set minimum, the relay will automatically turn on the pump and it will begin to pump water again, compensating for its flow and increasing the pressure to the upper threshold value.

The upper and lower thresholds at which the pressure switch is activated are set at the factory. The user, however, has the opportunity to make minor adjustments to the operation of the relay. The need for this may arise, for example, if you need to increase the water pressure in the system.

Due to the fact that the pump included in the pumping station does not operate continuously, but is turned on only from time to time, equipment wear is minimized.

A short video showing the principle of operation of the pumping station:

Rating of the best pumping stations

As mentioned earlier, when selecting a station, many characteristics are taken into account. Due to the large number of manufacturers on the market, users find it difficult to make a decision, so it is recommended to evaluate the rating of the best products. When compiling the TOP, the following factors are taken into account:

1. Maximum power.
2. Immersion depth.
3. Protection of the motor and rotor.
4. Easy to install.
5. Power consumption.
6. Voltage stability.
7. Bandwidth.
8. Price and guarantee.
9. Acceptability of using dirty water.
10. Average performance.
11. Case material.
12. Easy to maintain.

The best pumping stations are presented below.

TOP 15. Which pumping stations are the most popular in 2021?

The list contains information about the best and most famous pumping equipment. Which pumping stations to choose in 2021.

1 – Gilex Jumbo 50/28 Ch-18

The Gilex Jumbo 50/28 Ch-18 pumping station is a high-quality installation made from high quality materials. The unit is necessary to ensure water supply to homes, cottages and other facilities. The casing is made of cast iron and is distinguished by its wear resistance and durability. The pump will bring to life the supply of water from a well up to 9 meters deep for such structures as main water pipelines, reservoirs and the like. The pressure in the pump is maintained in automation mode using a pressure switch.

Gilex Jumbo 50/28 Ch-18

Advantages:

• Wear resistance;
• Durability.

Flaws:

• Heavy weight.

2 - Denzel PSD800C

The wide capabilities and high-quality casing of the provided model make it possible to call the design one of the best in accordance with cost and properties. Stainless steel is considered the main coating of the outer casing of the pump and guarantees perfect protection against external factors. Using an installed external ejector, the installation allows you to easily pump out water from a depth of up to 20 meters.

Denzel PSD800C

Advantages:

• Large suction depth;
• Ease.

Flaws:

• Easily deformed upon impact.

3 - Grundfos SCALA2 3-45

Grundfos SCALA2 3-45 is a modern representative of the generation of pumping stations designed to supply water to personal homes. The pump will provide excellent water pressure, including if you use multi-precision water analysis at the same time. This small-sized unit consists of the pump itself, an electric motor, a tank, detectors, and reverse suction and discharge valves. The pump contains an integrated frequency converter, which allows you to maintain excellent pressure at low cost. The electric motor is cooled by water, which it pumps itself, which ensures low noise levels.

Grundfos SCALA2 3-45

Advantages:

• Pressure compensation;
• Low noise level.

Flaws:

• Difficult to install.

4 - Metabo HWW 3500/25 Inox

The Metabo HWW 3500/25 Inox pump unit is an excellent and indispensable pump that is used on small private farms to ensure water supply. Contains a pressure gauge, which is designed to monitor changes in pressure. Up to 8 meters of suction from the well. Protection of the motor from overheating is taken into account. A high-quality sealing system for the pumping station casing allows for increased service life.

Metabo HWW 3500/25 Inox

Advantages:

• High-quality case;
• Good power.

Flaws:

• For clean water only.

5 - Grundfos MQ 3-35

The Grundfos MQ 3-35 96515412 pumping station is a multi-stage unit that provides water supply, whose operating principle is based on the use of high pressure. It has the ability to pump up to 54 liters per minute of clean water. The unit has a control panel with which the station is controlled and its operation is monitored. If there is no water available or the overheating sensor is triggered, the pumping station will automatically turn off.

Grundfos MQ 3-35

Advantages:

• High pumping speed;
• High power.

Flaws:

• Pumps only clean water.

6 — GILEX Jumbo 50/28 Ch-14

The automatic pumping station Gilex Jumbo 50/28 Ch-14 4016 is an excellent unit designed for uninterrupted supply of water to houses, country houses and other buildings. The pump design contains a pressure switch that controls the operation of the station. Performs work on collecting water from main water pipelines, reservoirs and others. The cast iron body eliminates deformation, which ensures durability.

GILEX Jumbo 50/28 Ch-14

Advantages:

• Good pressure control;
• Reliable case.

Flaws:

• For use only under clean water.

7 - Marina CAM 100/25

Pumping equipment Marina CAM 100/25-HL is necessary to ensure pumping of water. This station is used in country houses where water supply is so necessary for wells, reservoirs and other water structures. The unit is capable of extracting water at a suction depth of up to 8 meters. The pumping station has an unusually high power, up to 1100 W with a maximum pressure of clean pumped water up to 45 m. It has the ability to increase pressure in main water pipelines.

Marina CAM 100/25

Advantages:

• Great power;
• Protection against dry care.

Flaws:

• For clean water.

8 — VORTEX ASV-370/2 CH

Constant pumping of the water medium will be provided by the automatic pressure pump Vikhr ASV-370/2Ch. Can easily lift water from a suction depth of up to 9 meters. It has a reliable and high-quality cast iron body. The station power is up to 370 W, which directly affects the performance of such equipment. A hydraulic accumulator with a capacity of 2 liters ensures constant pumping of water, which undoubtedly affects long-term operation. Also, the pumping station can maintain constant pressure in the system.

VORTEX ASV-370/2 H

Advantages:

• Good performance;
• Cast iron body.

Flaws:

• Weak pipes.

9 - Metabo HWW 3300/25 G

The Metabo HWW 3300/25 G pumping station is used in houses and in areas around houses for pumping clean water in the premises themselves or pumping groundwater. The suction depth is no more than 8 meters. There is overheating protection, which ensures that the electric motor does not overload, which increases the service life of the pumping station. The design of the unit includes a pressure gauge, which makes it possible to monitor changes in pressure in the pipelines.

Metabo HWW 3300/25 G

Advantages:

• Overheat protection;
• Seal ring system.

Flaws:

• For clean water.

10 — VORTEX ASV-800/24

The surface pumping station Vikhr ASV-800/24 ​​has an electric motor with a power of 800 W, which makes it easy to supply clean water in your home or country house. Maximum pressure up to 40 meters, suction depth up to 9 meters, declared power up to 800 W. The design of the unit has a built-in thermal sensor that monitors overheating of the electric motor. The equipment is intended only for pumping clean water with temperatures up to 35 degrees.

VORTEX ASV-800/24

Advantages:

• Overheat protection;
• Centrifugal pump.

Flaws:

• There is no ejector.

11 - GARDENA 3000/4 Classic

The automatic pumping station for domestic water supply Gardena 3000/4 Classic is a unit with an electric motor with a power of no more than 650 W. Using this pump you can pump rainwater and tap water. The built-in thermal switch avoids overheating of the electric motor. It has such characteristics as a suction depth of 8 m, a head of 40 m and many important others.

GARDENA 3000/4 Classic

Advantages:

• Protection against dry running and overheating;
• Centrifugal pump.

Flaws:

• For clean water only.

12 – Marina CAM 80/22

The automatic pumping station Marina CAM 80/22 in its design has a pump with a self-priming function. This option is great for pumping water from a depth of 8 meters. The pumping equipment of this model perfectly maintains pressure inside the pipelines within certain limits. The automatic pump can be used both for water supply to country houses, country houses and others, and for watering vegetable gardens, front gardens and others.

Marina CAM 80/22

Advantages:

• Protection against overheating and dry running;
• Holds pressure well.

Flaws:

• For clean water only.

13 — VORTEX ASV-1200/24CH

The Whirlwind pumping station ASV-1200/24Ch is an indispensable unit that can be used to supply water to dachas, haciendas, and houses. The design of the equipment provides for a 24-liter capacity, which is necessary to avoid water hammer. The pump device is equipped with sensor-transforming equipment that measures and controls any changes in pressure. The design also includes an ejector that provides high pressure in the pipelines.

VORTEX ASV-1200/24CH

Advantages:

• Dry running protection;
• Great pressure.

Flaws:

• For clean water only.

14 — VORTEX ASV-800/24N

The automatic pump station for ensuring water supply Whirlwind ASV-800/24N is an indispensable equipment in a country house or plot of land. A 24-liter reservoir built into the unit will help avoid water hammer during a sudden change in pressure in the pipeline. Stainless steel is the material of the pump body. It has excellent characteristics, especially such as the productivity and water pressure of the pumping station.

VORTEX ASV-800/24N

Advantages:

• Excellent performance;
• Sufficient pressure.

Flaws:

• Works only for clean water.

15 — GILEX Jumbo 70/50 N-50

Smart water supply electronics Gilex Jumbo 70/50 N-50 N HOUSE 8756 perfectly organizes the supply of liquid outside cities. The device is equipped with such modules as a pressure sensor, control control, and overcurrent protection. The pump housing is made of stainless steel. The volumetric hydraulic accumulator included in the design of the equipment provides excellent performance and pressure of the pumping device.

GILEX Jumbo 70/50 N-50

Advantages:

• Very high power;
• Has protection against overheating and dry running.

Flaws:

• Works only with clean water.

The best pumping stations for normal operating conditions

To use a pump in a country house, models of medium power are selected, since water is not pumped out at great depths. It is also important to consider the following factors:

1. Water tank capacity.
2. Power consumption.
3. Compactness of the product.
4. Easy to connect pipes.
5. Pump security. Manufacturers VIHR, Denzel, DAB produce products for a country house. The best of them are described below.

VORTEX ASV-800

Price from 6300 rub.

The rating opens with a standard pumping station, which is suitable for pumping water not only from open reservoirs, but also from wells. According to user reviews, the products are autonomous and easy to maintain. Stable pressure in the system is maintained and there is no need to frequently inspect the pump. It pumps water in large volumes without any problems; a capacitive expander is provided. A centrifugal pump is used, which provides a throughput of more than 3 cubic meters per hour. The station operates from a standard 220 volt network and a power of 800 kW is enough to ensure a stable water supply to the house. If we consider the features, we note the security of the motor and ease of inclusion. Cleaning is carried out periodically, and the casing is made of plastic, so it is resistant to elevated temperatures and vibration.

Advantages:

• Stable voltage.
• High pressure.
• Easy installation.
• Motor security.

Flaws:

• High vibration level.
• Plastic housing.

VORTEX ASV-800/19

Proven Denzel PS1000X

Price from 8000 rub.

The model of the German manufacturer is produced in a plastic case with a centrifugal pump. The device can be called protected; the rotor is not afraid of increased vibration. The power is enough to provide a head of 44 meters. The snack is made of plastic, but is not afraid of increased loads. Among models with a single-stage suction system, the product is distinguished by the quality of a centrifugal pump.

Advantages:

• Light weight.
• Product security.
• Good pressure.

Flaws:

• Noisy model.
• Difficulty adjusting pressure.

Denzel PS1000X

DAB AQUAJET 132 M

Price from 13,700 rub.

This pumping station for a summer residence is suitable for pumping clean water. It works with a security system, is compact in size and weighs only 20 kg. Italian specialists placed the main emphasis on performance and ease of use.

Advantages:

• High security class.
• Reasonable price.
• The quality of the pipes.

Minuses:

• Fragility.
• Rapid wear of the motor.

DAB AQUAJET 132 M

AQUAROBOT JS 60

Price from 7200 rub.

This pumping station can be called universal; it is suitable for pumping water from storage tanks and open water supply sources. Enough power to ensure high performance. The model is manufactured in a rigid case and is designed to withstand significant loads.

Pros of the pump:

• Flange quality.
• Housing security.
• Not afraid of high temperatures.

Some cons:

• Big vibration
• Not suitable for wells.

AQUAROBOT JS 60 – 5

GILEX Jumbo 70/50 N-24 (carbon steel)

Price from 11,800 rub.

The peculiarity of the station is the use of a capacitive hydraulic accumulator. Pressure monitoring equipment is provided and a protected electrical cable is used. The station operates in autonomous mode and consumes a small amount of electricity.

Main advantages:

• Flange security.
• Tightness of the structure.
• Pump endurance.

Minor cons:

• Low quality rotor;
• Problems with the filter.

GILEX Jumbo 70/50 N-24

What types of pumping stations are there?

All pumping stations (hereinafter referred to as pumps) are divided into two fairly large categories: dynamic and positive displacement pumps.

• A dynamic pump is a unit in which water moves under the influence of a force in a chamber;
• A volumetric pump is a unit within which liquid moves by constantly changing the volume of the chamber.

Dynamic Aggregates

Dynamic units, based on the forces they exert on the water that moves in the sealed chamber of the pump, are divided into the following categories:

• lobed;
• friction pumps;
• electromagnetic.

Vane pumps

A vane pump is a mechanism that transfers all the energy through blades that are constantly rotating rapidly, which results in the direction of fluid movement and pressure in the machine. Vane pumps are:

• with centrifugal force;
• axial;
• diagonal.

A centrifugal unit is the same vane pump, inside of which the liquid runs through a wheel with blades from the center to the periphery. The latest centrifugal machines are divided into categories according to certain criteria:

• at the location of the rotor axis;
• by how the electric motor is connected to the pump;
• according to how many working units are in the unit;
• depending on how many water supplies there are to the pump;
• Therefore, is it possible to immerse the pump in the pumped water?

The above list of machines with centrifugal action is not complete, since they can also be divided according to other characteristics.

The axial unit is a mechanism that distributes all its fluid along the axis of the working screw. It consists of a fitted bushing and blades attached to it, deformed so as to give direction to the movement of water. When this type of propeller begins to rotate, liquid with a certain force and pressure begins to be captured by the blades and pushed out in a certain direction. Such pumps are usually used in those jobs that require the use of a small pressure of water being pushed out.

The principle of operation of a diagonal pump is similar to both centrifugal and axial units. The liquid moves using centrifugal force and enters the pump in the direction of the axis of rotation of the impeller, and exits at a certain angle to the axis of the machine itself.

Friction pumps

Friction pumps are dynamic pumps, in which the fluid moves through friction. These pumps include screw and vortex pumps.

The auger mechanism distributes water by moving it through the screw auger in the direction of its own axis.

The vortex unit transfers fluid along the periphery of the impeller in a tangential direction.

Electromagnetic units

From the name of the pump it is clear that the electromagnetic unit moves the liquid using electromagnetic forces.

Volume units

Volumetric units operate using a mechanism that pushes liquid out of a solid body. Types of pumping stations:

• translational-rotary;
• rotary-translational;
• rotary-rotational.

Positive displacement pumps are designed to reproduce enormous water pressure, reaching up to 100 meters with a small volume of liquid consumed. Such units have high power and self-priming function.

• Sliding pumps

A reciprocating pump is a reciprocating mechanism with reciprocating movement of the drive link. They come in gear and screw types.

• Rotary displacement pumps

A reciprocating pump is a mechanism based on a rotor with reciprocating and rotational movement of working units and parts of the unit. Such pumping stations include piston and diaphragm pumps.

• Rotary pumps

The principle of operation and operation is a powerful mechanical rotation using the rotor of the pumping station.

The best pumping stations with large suction depth

To effectively suck water from a deep well, powerful stations with centrifugal pumps are used. Their productivity starts from 40 liters. Asynchronous motors with a power of 800 watts or more are used. There are models with durable cast iron bodies or an aluminum alloy is used.

Grundfos Hydrojet JPB 5/24

Price from 21,000 rub.

The German manufacturer offers a model for the garden that can withstand a pressure of 6 bar. A single-stage suction system is used and a protected rotor is installed. The inlet diameter is 1 inch and a strong frame is used.

Main advantages:

• Good stability.
• Suitable for wells.
• Low noise.

Some cons:

• Overcharge.
• Difficult to maintain.

Grundfos Hydrojet JPB 5/24

Quattro Elementi Automatico 800 Ci Deep

Price from 7500 rub.

With the help of this product it is easy to solve the problem with water supply in a private home. Open sources of water supply and closed reservoirs are considered. The Italian company produced a model with a steel accumulator, and the body is made of cast iron, so it is heavy. Operation is ensured by an asynchronous motor. The model is automatic and unpretentious in maintenance.

Main advantages:

• Reliability of fastening.
• Protected motor.
• Long work.

Minuses:

• Problems with the rotor.
• Dirty water is not suitable.

Quattro Elementi Automatico 800 Ci Deep

CALIBER SVD-770CH+E

Price from 9200 rub.

Among surface stations, this model stands out on the positive side. For it, water heated to a temperature of more than 30 degrees is allowed. The tank is used for 20 liters, and the manufacturer took care of the connection. The model is only suitable for pumping clean water. The station is installed at dachas and country cottages.

Main advantages:

• System autonomy.
• Installation mobility.
• Easy to turn on.

Some disadvantages:

• Starts loudly.
• Overcharge.

CALIBER SVD-770CH+E

The best budget models

Inexpensive stations are considered if a pump with low capacity is selected and low water pressure is not required. Manufacturers save on materials and components. However, based on user reviews, it is still possible to select a compact station that will allow you to pump water from a well, and manufacturers from Russia, Italy, and other countries are represented on the market.

Russian CALIBER SVD-160/1.5

Price from 3500 rub.

This is a popular station that is compact and additionally provides a pressure of 28 m. As a rule, it pumps water from open tanks and wells can be considered. The rotor is made of brass, the installation power is only 160 W. The pump cannot be called secure, but problems rarely arise with it. To cool, you have to periodically turn off the device.

Main advantages:

• Rotor strength.
• Pump quality.
• Decent performance.

Minuses:

• Not suitable for wells.
• Problems with the impeller.

CALIBER SVD-160

PRORAB 8810 SCH

Price from 3000 rub.

The station comes with a centrifugal pump, has good performance, and uses a 2-liter hydraulic accumulator. A single-stage system can hardly be called high-quality, but it ensures a stable water supply. The disadvantage lies in the fact that there is no way to regulate the pressure.

Advantages:

• Cast iron body.
• Engine power.
• Single stage suction system.
• Centrifugal pump.

Minuses:

• Chinese kit.
• No protection.

PRORAB 8810 SCH

AQUAROBOT M 5-10N

Price from 3500 rub.

For a country house, this budget station with a 5-liter hydraulic accumulator is often considered. It operates on a 220 volt network and is not afraid of overloads. It can withstand a maximum pressure of 3 atmospheres, so when connecting everything is agreed upon with a specialist. The pipes for the pump are suitable with a diameter of 25 mm. The model does not consume a lot of electricity, so it can be called economical.

Advantages:

• Suitable for slightly polluted water.
• High quality hydraulic accumulator.
• Presence of an impeller.
• Protective rotor.

Minuses:

• Low pressure.
• Relay failures.

AQUAROBOT M 5-10N

The best premium models

If your budget allows, you can consider premium stations. In the high price category there are sellers of German and Italian manufacture. The user has the opportunity to select an installation with a protected cable and a powerful pump. There are models with electronic control and LCD display.

DAB E.Sybox

Price from 78,900 rub.

The device cannot be called compact, but a huge pump with high power is used. It is suitable for pumping various types of water (even with abrasive impurities) and is unpretentious in terms of temperature. Withstands a maximum pressure of 7 bar and takes into account the protection of the engine. All wiring is hidden, according to user reviews there is a very low noise level.

Main advantages:

• High pressure.
• Pump power.
• Built-in frequency converter.
• Availability of LCD display.

Minuses:

• Installation problem.
• Pressure adjustment.

DAB E.Sybox

Wilo HMC 605

Price from 52,000 rub.

The Germans offer to evaluate the quality of this station, which has colossal power and provides a productivity of 7 cubic meters per hour. 1-inch diameter pipes are suitable for connection. The kit includes a 50 liter membrane tank. The unit is good for watering and runs quietly.

Main advantages:

• Single phase motor.
• High power.
• Quality of protection.
• Stainless steel housing.

Disadvantages of the system:

• No dry running protection.
• Large dimensions.

Wilo HMC 605 3

Grundfos CMBE 3-62

Price from 62,500 rub.

For water supply and irrigation, this station with a pressure of more than 9 bar is considered. A self-priming motor is used and the frequency needs to be adjusted. It is made of stainless steel, so the body is durable. A 2-liter tank is used; in addition, the system has a significant head of 39 m.

Main advantages:

• Suitable for watering.
• Long cable with plug.
• Easy installation.
• Station performance.

Minuses:

• Noisy during operation.
• High electricity consumption.

Grundfos CMBE 3-62

Low noise pumping stations

When the station is located near the house, you want the noise level to be as low as possible. For normal models it is around 60 decibels. To ensure quiet operation, casings made of different materials are used. The motors are usually of the synchronous type.

Hammer NST 800A

Price from 8900 rub.

The product is supplied with a centrifugal pump, providing a pressure of more than 45 m. Contaminated water is allowed in which the particle diameter does not exceed 3 mm. The model is compact, weighs only 15 kg and is easy to transport. The noise level is only 60 decibels, a protective casing is used.

Important benefits:

• Capacity is more than 3.5 cubic meters per hour.
• Protective cover.
• Asynchronous motor.
• Reliable frame.

Minor disadvantages:

• Engine problems.
• No filter.

Criteria for choosing silent pumping stations for a private home

The presence of an autonomous water supply at the site saves from unforeseen situations. A silent pumping station for a private home will be relevant if there are frequent water shortages in the area. To acquire high-quality equipment, you need to take into account some nuances of choice.

• Noise level is an important parameter for devices that are installed in a residential building. Its indicator should be no more than 30-45 dB.
• Unit power. This indicator is taken into account without fail depending on the area of ​​the house, which must be fully serviced by the pumping structure.
• Well characteristics. Depth, diameter, static water level and other parameters must be taken into account when choosing a pump for your home.

The strength and reliability of the housing, as well as the integrity of the electrical cable, are equally important factors that must be taken into account when purchasing a household pumping station.