Dremel 4000-6/128
The next hero of the TOP is Dremel 4000-6/128.
The power of this engraver is 175 W, and the spindle speed can be adjusted in a wide range from 5 to 35 thousand rpm. This ensures complete control and high precision processing of various materials. The tool maintains high productivity even when processing particularly durable workpieces, allows you to quickly remove and install attachments and is excellent for working even in hard-to-reach places.
Well, the most important thing is that this tool comes complete with 128 attachments and attachments, which are stored in a convenient and durable case.
The set of attachments includes: a flexible shaft, an angle attachment, a sanding platform, a cutting kit and a handle for a more comfortable grip. There are 128 attachments in this set, as I already said. There are a variety of grinding stones and wheels, high-speed attachments, brushes, drill bits, polishing wheels, holders, cutters and much more. So this set is suitable for a wide range of works: cutting, grinding, carving, engraving, polishing and much more.
There are no complaints about the build quality of this engraver. But among the disadvantages it is worth noting that there are beats at low speeds and the tool heats up quite quickly. So you won't be able to work with them for long. However, for personal use this tool with a rich set of attachments will be an excellent solution.
- Power: 175 W.
- Speed: 5000 – 35000 rpm.
- Power supply: mains.
- 128 nozzles.
- Case.
- Dimensions: 230 x 41 x 43 mm.
- Weight: 660 g.
Which engraver is better to buy
For home use, devices operating at a power of up to 100-200 W are quite suitable, but for professional use, more “strong” power tools are needed. For rough processing of material, a mini-drill operating at a speed of up to 10,000 rpm is sufficient, but if you need to get an accurate cut and a smooth surface, you will need to choose a higher speed.
Here's the best engraver to choose, depending on the situation:
- To perform wood engraving, you can buy an electrical device “Whirlwind G-160GV”.
- The ZUBR ZG-160EK device copes well with metal work.
- Those who are looking for a multifunctional device that can engrave, grind, and drill should take a closer look at the Bort BCT-170N model.
- For engraving in hard-to-reach places, it is best to choose the Sturm GM2317FL.
- If you plan to work a lot and do not want to depend on electricity, then the best solution would be to buy a Dremel 8220-5/65.
- For those who plan to travel frequently with an engraver, the most interesting option would be the Hammer AMD3.6
When choosing the best engraver, you need to focus primarily on your needs, and also take into account real customer reviews. This will allow you to choose the most reliable, high-quality and useful tool for you.
Proxxon FBS 240/E, 28472
Next in our TOP is the Proxxon FBS 240/E, 28472 engraver.
This is a high-precision tool made in Germany with a reliable 100 W motor that can be used for drilling, milling, grinding, polishing, deburring and engraving products made of different materials. It is very compact and weighs only 450 grams, so it is perfect for working with small workpieces and in hard-to-reach places.
The engraver spindle has a rotation speed adjustment in the range from 5 to 20 thousand rpm. The tool almost always provides constant torque, even at low speeds, thereby facilitating operations that require increased precision. For example, micro-drilling, grinding or polishing a small area. It is also worth noting that the neck of this tool, with a diameter of 20 mm, is adapted for mounting in frames and vices of the same manufacturer. And the shaft is equipped with threads for the use of steel collets.
Comfort when working with such an engraver is ensured by the presence of rubber inserts that improve the grip of the tool. It is also worth noting that, complete with this engraver, you will receive a chuck with clamp adjustment in the range from 0.3 to 3.2 mm and 43 consumable tools for various types of work. Well, to make it all convenient to store and move from place to place, a durable case with latches is provided.
The owners speak strictly positively about this engraver, noting that it surpasses its Chinese counterparts in all respects. So, if you need a reliable tool, then you should pay attention to this model.
- Power: 100 W.
- Speed: 5000 – 20000 rpm.
- Chuck clamp: 0.3 – 3.2 mm.
- Power supply: mains.
- 43 nozzles.
- Case.
- Weight: 450 g.
The best mini engravers
Such devices usually weigh a maximum of 600 g, which is why they are called “mini”. They easily fit in a small bag and are especially useful when you need to engrave in hard-to-reach places. They can work on both wood and metal, depending on the material. This category describes the advantages and disadvantages of one, the best, according to customer reviews, model.
Hammer AMD3.6
This inexpensive mini-drill is called that for a reason; it is really compact, does not take up much space in the house and can be easily transported if necessary. True, this device is relevant for performing short and not very heavy engraving work, since its power is not the highest in the rating. The battery holds a charge for quite a long time and charges quickly. The device, if required, is easy to carry with you. The engraver has a high-quality body that can even withstand a fall from a height.
Advantages
- The set includes 118 additions;
- Good charger;
- Light weight;
- Small dimensions;
- Fits comfortably in the hand;
- Protection against accidental activation.
Flaws
- The maximum disk rotation speed is up to 18,000 rpm.
Due to the protection of the motor, during long periods of work the machine may stop periodically.
Inexpensive network models
Hammer Flex MD050B
By and large, this tool is a cross between an engraver and a mini-drill, and has a very reasonable price. The power is not too high, but the overall dimensions are small, and all tasks assigned to this tool are performed at a high quality level. The unit is supplied in a plastic blister; there is no case for storing equipment and attachments for it. The engraver comes with as many as 80 attachments. This product can be powered either from a regular network or from the vehicle’s on-board network - for this there is a special adapter that is inserted into the cigarette lighter. The engraver has a fairly long power cable - almost 2 meters, so you don’t have to use extension cords. The device itself has small overall dimensions and light weight - its weight is only 200 grams. Thanks to these parameters, you can hold the structure like an ordinary ballpoint pen and perform work with high precision. At the same time, the hand does not get tired at all while using the device. The vibration here is minimal.
There is only one control button on the body, and there is no provision for adjusting the number of revolutions - this figure is standard, it is 15 thousand per minute. The machine is equipped with a reliable removable collet chuck, and four collets are supplied with it, the diameters of which are 1 mm, 2.4 mm, 3 mm and 3.2 mm. They are easy to change, it takes a minimum of time, and the process does not require the use of special tools. There is a button that clamps the spindle and does not allow the collet to rotate, so it is very convenient to remove it. The assembly is of high quality, the case does not play or creak, the product functions without beating or vibration, and there is practically no noise from the device. The engine practically does not heat up, but the manufacturer recommends working without a break for no more than 15 minutes.
More: Top 10 mini projectors, how to choose a mini projector
Advantages:
- Small overall dimensions of the product;
- Good build quality;
- Simplicity of device and operation;
- Comfortable to hold in hand;
- Long power cable;
- It operates almost silently.
Flaws:
- There is no possibility of adjusting the number of revolutions;
- There is also no storage case.
Hammer Flex MD050B
Bort BCT-140
The product is capable of developing a fairly high speed, the upper threshold of which is 32.5 thousand revolutions per minute. The appearance is very similar to a small drill. The design comes in a convenient plastic case in which the device can be stored and transported. The set includes a decent number of attachments; the collet is designed for a diameter of 3-4 mm, but the socket for its installation is universal, so you can purchase designs of larger and smaller diameters. The power cable is about 2 m long, while the length of the device itself is 24 cm. The engraver is equipped with a wheel speed switch - minimum rotation is 8 thousand revolutions. Switching occurs in step mode. The power of this equipment is 135 W – it will be quite enough for home use.
The device is universal, it can perform a large number of different operations. The weight of the product is not too large. In their reviews, users note the accessibility of this tool - almost anyone can afford it. The body of the structure is made of plastic, which will not slip out of your hands for a long time, the build quality is high.
Advantages:
- Reasonable cost;
- High turnover rates;
- Reliability;
- Long service life.
Flaws:
- It heats up a little during operation, periodically you need to give the device a rest.
Bort BCT-140
Dremel 200-5
Another model produced by a well-known manufacturer, and this design is the most affordable. The product comes with five attachments and a special key so that the collet can be changed if necessary. The power rating is quite suitable for home use of the product. The engraver weighs 125 W with a weight of 0.55 kg, the maximum number of revolutions when operating without load is 35 thousand. Even during prolonged use, the tool will not overheat. The vibration during use is minimal and your hands don’t get tired of it at all. The speed switch here is mechanical and has only three positions - off, low speed (15 thousand per minute) and high speed (35 thousand). There is a special metal loop by which the device can be hung for storage. The device is compatible with most attachments that are commercially available. In the immediate vicinity of the cartridge there is a special button that fixes it in one position and does not allow rotation.
This equipment is used not only for decorative work, but also during repairs. In particular, with its help you can not only cut off dowels, but also sand their edges; the device copes perfectly with cutting ceramic tiles. The product can perfectly replace various tools when it is necessary to perform work in hard-to-reach places - in particular, it can perform the functions of a drill, angle grinder, and so on.
Advantages:
- Reasonable cost;
- High maximum speed;
- Long service life;
- Easily replaces many tools in places that are not so easy to get to.
Flaws:
- Speed adjustment from just two positions.
Dremel 200-5
The best mechanical engravers for professionals
In his professional activities, the engraver is exposed to heavy loads. In addition, engravers or jewelers are demanding on the quality of processing. When the device is in your hand during a shift, lightness will also become an important factor. Experts have identified several professional tools.
Dremel 8220-5/65
Rating: 4.9
Professional engraver, runs on battery power and generates up to 30,000 rpm. The battery capacity is 1.5 Ah, so you can work on one charge for up to several hours. The included charger uses pulse technology and replenishes the capacity in 60 minutes. The manufacturer supplies the product in a spacious case, convenient for transporting the tool. The set comes with 65 attachments for processing smooth and oval surfaces. Reviews show that the equipment is of high quality and will last for several years of use. There is also a linear milling compass, a universal-type cutting guide and an additional handle that increases the accuracy of work. The area under the chuck is illuminated by a built-in battery, so the cutting line is clearly visible. The rotation stops quickly when the button is released thanks to the motor brake.
The engraver comes with two batteries, which extends the duration of use. Users also note in their reviews that the battery comes from the green Bosch series, so if you have a German brand cordless tool, the battery life can be increased even more.
Advantages
- comfortable holding;
- long battery life;
- there is illumination of the working area;
- practical suitcase.
Flaws
- expensive original nozzles.
Dremel 4000-6/128
Rating: 4.8
The combination of high power (175 W) and speed (35,000 rpm) has become the hallmark of the Dremel 4000-6/128 professional engraver. With this device you can achieve precise processing of parts and good productivity. The manufacturer has equipped the model with a number of useful functions, among which it is worth noting rotation speed adjustment, a speed stabilization system, and spindle lock. The kit includes an additional handle, a case, a flexible shaft, 65 or 128 attachments (depending on the modification) and a stand.
Users appreciated the versatility of the device; it can be used to process different materials, from plastic to metal. During operation, there is no significant heating of the motor, backlash or beating.
Advantages
- powerful, revving engine;
- many attachments and accessories;
- rich functional content;
- reliability and durability.
Flaws
- high price.
BOSCH GRO 12V-35 0 box
Rating: 4.8
The drill is sold with a key, one disc and an insert in a case. But the suitcase itself is not here. The engraver runs on a 12 V battery, which is suitable for any Bosch blue series power tool. If you already have such products from a German brand, then you don’t have to buy a battery and charger and you can save money. The engraver is capable of reaching up to 35,000 rpm, and the rotation speed is electronically controlled. When engraving for a long time, the start key can be locked, relieving your fingers. Replacing accessories is easy thanks to the spindle lock.
Professionals note in reviews that at low speeds this cordless engraver demonstrates increased power compared to networked models. This is relevant for processing plastic, which at high speeds begins to burn and stretch. If you cut off thick metal with it, then when it overheats, the motor will go into protection, which will prevent the winding from burning out. Such a system ensures a long service life of the power tool, even if the master gets carried away with the process and forgets about breaks.
Advantages
- rubberized body;
- 35000 rpm;
- no wires get tangled under your feet;
- The battery is compatible with other Bosch tools.
Flaws
- modest equipment;
- the backlight may be directed slightly to the side.
Dremel 3000-1/25 EZ
Rating: 4.7
For its high processing accuracy, the Dremel 3000-1/25 EZ engraver takes fourth place in our rating. With its help you can carry out the most delicate and miniature types of work. Users even process various decorations. Experts pay attention to the unusual design of the device; thanks to the EZ Twist function, you can change the equipment without using a collet wrench. The model has universal qualities; it can grind, cut, engrave, etc. The motor power is 130 W with a maximum rotation speed of 33 thousand rpm. The set includes a convenient case and 25 replacement attachments.
According to users, the advantages of the model are processing accuracy, comfort during long-term operation, and lack of vibration. The heating of the motor when using a flexible shaft did not allow the product to outperform its competitors.
Advantages
- processing accuracy;
- quick replacement of equipment;
- vibration protection;
- versatility.
Flaws
- Heats up with a flexible shaft.
Hammer MD170A
Rating: 4.7
The engraver has a power of 170 W and spins the equipment up to 35,000 rpm. The professional model is equipped with 160 attachments, providing everything you need for initial work. The manufacturer provides a flexible shaft that makes it easier to work with the machine at an angle. To fix the drill and bring parts for processing, a bracket is provided. The speed is adjusted here with an additional wheel. The rubberized body does not slip out of your hands, but it weighs 2 kg, so your hands get tired of it faster. Reviews praise the device for its power and packaging. In addition to the accessories, the tool comes with a spacious bag.
The engraver is distinguished by a speed stabilization system. If you press on it to make the indentation a little larger, the rotation will not slow down. This allows you to create engravings of varying depths and cut hard materials more confidently.
Advantages
- rubber stop on the cartridge;
- cuts everything;
- convenient bag for transportation and storage;
- a lot of attachments.
Flaws
- weighs 2 kg;
- weak cutting wheels in the set;
- not a strong standard collet.
Makita GD0603
Rating: 4.6
The Japanese manufacturer Makita offers a professional engraver with a power of 240 W, which perfectly cuts wood and metal. The maximum size of the cutting disc is up to 19 mm, and rotation of the equipment is possible up to 28,000 rpm. The kit includes a conical and cylindrical nozzle, as well as two open-end wrenches. The engraver body is equipped with multiple perforations, which provides excellent cooling of the motor, which extends the time of continuous operation. But dust gets inside through these holes, so some experts in reviews recommend putting a stocking on top. The device weighs 970 g, which is explained by a more powerful motor. If you buy a submersible base for it, you can even use it as a router, which expands the scope of use.
This professional engraver can be used permanently, secured above the conductor on a cable using a steel loop at the end. If necessary, you can quickly free your hands to turn over a large product, and the drill will always be at hand.
Advantages
- high-quality assembly;
- can be used as a plunge router;
- There is a metal loop for hanging;
- high power.
Flaws
- weighs 970 g;
- There are many holes on the case through which dust gets inside.
The best engravers for hobbyists
It is hardly worth buying expensive engravers for your home. Among budget models there are many reliable and durable devices. They will allow you to gain first work experience and experience the pleasure of the creative process. Experts have selected several inexpensive devices.
Bison ZG-130EK
Rating: 4.7
The combination of different characteristics allowed the Zubr ZG-130EK engraver to take first place in the rating. The model is quite powerful (135 W) and resourceful (30,000 rpm), it is easy to use and lightweight (0.65 kg). But experts consider the main advantage of this device to be a reliable engine. Unlike a number of budget devices, it does not overheat during prolonged use. The manufacturer has made a pistol-type handle, which may be inconvenient for many users. In addition, the high price of the product worries buyers. It is explained by the richest equipment. The engraver comes with an entire suitcase containing 242 items.
After purchasing the engraver, the master can immediately begin work. The owners cite the short cable (1.5 m) and the poor quality of most attachments as the disadvantages of the device.
Advantages
- rich equipment;
- power and speed;
- smooth speed control.
Flaws
- low quality of most nozzles;
- short wire.
