Is it worth starting treasure hunting?
In principle, Chinese metal detectors may provide the answer. Moreover, for relatively little money.
Regardless of the motive: introduction to amateur archeology, greed, idleness - a novice treasure hunter will give his hard-earned rubles, dollars or euros for a Chinese craft or for a European or American device.
Aliexpress, Gearbest, Banggood and other trading platforms offer devices that look like a metal detector and often even work. Let's figure out whether it's worth investing even a little money in these metal detectors.
What to look for when choosing a metal detector
To begin with, study the most important characteristics in order to build on them when choosing a specific model. There are not very many of them, so it will not be difficult to understand this issue and find the best option for your needs:
- Operating frequency range. The larger it is, the wider the capabilities of the device. Inexpensive models may have one frequency, but here you need to remember the following: the lower it is, the deeper the search. But at the same time, small objects (jewelry, rings, etc.) are less easily detected. A high range allows you to search for small things, but the depth will be small.
- Search depth. There may be different options, mainly the indicator depends on the calibration of the device, the same model can show different results. It is important to set up your metal detector well.
- Discrimination is the name given to the ability of equipment to distinguish between different metals. This factor depends on the quality of the components, so in expensive models the sensitivity is much better.
- Pinpoint allows you to clearly determine at what depth the found object is located.
- Type of food. Most often, metal detectors use AA or Krona batteries. You should choose based on convenience; it is better to immediately purchase batteries and a charger.
- Reel size and design. The larger it is, the more effective the search at depth. Small options are good for detecting small objects. To search for gold, it is better to select a coil that is resistant to mineralization.
For your information!
You need to pay attention to the weight of the product and the presence of shoulder straps. Even not very heavy equipment will be difficult to carry in your hands for several hours.
It is best to select several options and compare them so that you can compare the characteristics and find the optimal solution. This is the easiest way to see which metal detector best meets which requirements.
Main settings
We have already found out that deep pits are built according to two different schemes. And for each scheme its own design parameters are important. For RF - the distance between the coils and their size. And for PI - frame size and power.
By selecting optimal design parameters, designers ensure that metal detectors achieve certain characteristics. About them below.
Target detection depth
This indicator depends on the frequency of the waves used. At a frequency of 2.5 kHz, you can detect a large metal object that is located at a depth of about 0.5 m. A frequency of about 7 kHz is considered average. It allows you to identify large metal objects at a meter depth or find small coins located close to the surface.
For searching for gold items, the optimal frequency range is 10-20 kHz. With professional-class equipment, you can adjust the frequency depending on the type of soil, the type of metal you are looking for, the dimensions of the products, etc.
Operating frequency
For PI, frequencies are in the region of only 100-500 hertz, so when working near power lines, it would be nice to have detuning from electromagnetic interference - currents in power lines have frequencies of the same order - 50 or 60 Hz.
For RF such problems are not relevant.
Number of settings
An important point is the ability to manually set discrimination, frequency and sensitivity indicators. This allows the device to be used for various needs. A large number of settings are typical for expensive devices.
Settings to ground
The soil composition in different areas differs in the degree of contamination, composition, level of mineralization and a number of other parameters. Fine tuning allows you to cut out interference and thereby increase search efficiency. As a rule, this function is available on the most expensive models.
Coil type
Some models are distinguished by a wide range of actions, others are “tailored” for searching for small objects. The specific choice is determined by the search goals. Some models can work with replaceable coils of different parameters. In addition to the technical characteristics given, you should also pay attention to the physical properties of the device. For example, this is the weight and convenience of the handle.
This is important because you often have to walk long distances with a metal detector.
Since you have to work outdoors, it is important that the metal detector is protected from precipitation.
See also: TOP 10 best baby formulas for newborns
Search rate, interference resistance
This is the maximum speed of movement at which the sensitivity of the detector is maintained. Resistance to interference refers to the ability of a device to detect metal with certain parameters. The presence or absence of interference does not matter.
Discrimination
This word means the ability to search for products made of a specific metal. Budget models often lack this function. At best, they are able to distinguish between ferrous and non-ferrous metals.
If the device is a professional one, it can be configured to search for specific metals, such as silver, bronze, copper or gold. This indicator is especially important when searching near bodies of water, for example, on beaches.
Easy to use
Beginners are not recommended to immediately buy professional devices, not only because of the high cost, but also because of the large number of complex user parameters. For this reason, devices whose interface is intuitive are suitable for beginners. Moreover, in the budget segment there are also quite high-quality models.
Resolution
This is the greatest distance between two objects at which the device recognizes them as 2 separate objects. The indicator is determined by the parameters of the electromagnetic radiation of the device.
What is the difference between depth probes with a frame and with a coil?
Using a depth detector with a coil is possible for regular searching, but VLF metal detectors are more effective when searching for coins. The depth worker begins to earn his price only with a frame. It’s not for nothing that most PI depth probes are sold as a set of frame and control unit. Rods and reels are additional accessories.
What is a depth frame
The frames are operated by devices built according to the PI scheme. The frame is a square coil of one circuit. The side of the frame can be very large, but in reality the maximum size is 2 meters. Above that, it is already difficult to ensure the rigidity of the structure, and the weight is already too great - you cannot do without a cart built without a single nail.
Which metal detector is best to buy to search for coins?
To choose the best Chinese metal detector for coins, you should pay attention to the detection depth of objects and the metal sorting function. It is desirable to have Pinpoint to more accurately determine the location of an object. The light weight of the metal detector makes it easy to use.
The devices that can be ordered from Aliexpress differ in their capabilities and comfort during operation:
- The HOOMYA MD-6350 can be purchased by the novice and experienced treasure hunter. The device is equipped with a coin depth indicator and has a waterproof coil.
- All Sun TS180 is a budget model and is more suitable for searching for large items. Finds coins at shallow depths.
- Thanks to its bright display, TIANXUN MD5030 is suitable for treasure hunting at any time of the day. It should be noted that the device is not able to track the size of an object found in the ground.
- KKMOON MD4030 is ideal for searching for coins if you set it to dynamic mode. It does not adjust for gold separately.
- HOOMYA TX-850 is configured to search for different types of metal. Good at searching for small objects, including coins.
The model of the Chinese metal detector BOOLATEK MD4030P/MD4030 is the best in terms of price and quality ratio. Users recommend the device to novice treasure hunters. It is not complicated in settings, and allows you to master the intricacies of a new hobby in a short time.
What to look for when choosing?
When choosing a metal detector, it is important to pay attention to the following points:
- type of device. In most cases, the buyer prefers ground models. However, if you plan to look for treasure under water (a lake or other body of water), you will have to purchase a device that can be used in water;
- frequency of detection of objects. The depth that the device can scan depends on it. The higher the frequency, the deeper the metal detector can “look”;
- coil type. The search radius, its depth, as well as the detection efficiency depending on the composition of the soil depend on it;
- the presence of a discrimination function so that you can set the device to filter out debris;
- adjusting ground balance. It can be automatic or manual and allows the device to operate effectively on highly mineralized soil;
- the presence of headphones so that when detecting objects the metal detector does not make loud sounds and does not disturb others;
- weight that affects the fatigue and performance of the treasure hunter.
How to choose a good metal detector?
First of all, you need to decide on the type of equipment. Ground models demonstrate good efficiency when working with the detection of objects buried in the ground, in pipelines and caches. Moreover, in premium inventions of this type, the coil may be protected from moisture. In turn, underwater models are suitable for searching for objects underwater, at the bottom of reservoirs. They have a sealed, waterproof housing that is resistant to salty soils. There are also inspection metal detectors designed to inspect metal objects, but this is a somewhat specific option. If you don’t know how to choose a metal detector, you should also pay attention to the following parameters:
- Coil type . On sale there are concentric ones, which are characterized by certain difficulties in surveying wide areas, mono coils with a budget price and a limited field of action, and DD coils. The latter have a pair of windings and are widely distributed. The shape of the coils is round, elliptical, rectangular and butterfly.
- Number of coils . Regardless of the operating principle, all detectors have emitter coils. At the same time, advanced models have a large coil for exploring a large area and “snipers” to obtain more accurate results.
- Detection rate . One of the key parameters, selected depending on the size, type of soil and materials being studied.
- Detection depth . This indicator is always approximate, and even conditional. Depends on the quality of the coil and the soil itself.
- Discriminator . A special module that allows you to recognize detected objects. It is used in advanced models, which negatively affects the price of the device.
What is important to know when buying a deep metal detector
It is important to be aware that the manufacturer measured the detection depth under ideal conditions - in clean ground, with an intact target. In real life, you have to work in littered areas, and helmets, cannonballs and other targets are pretty much damaged by corrosion.
When choosing, you should pay attention to the possibility of using both coils and frames, stability of operation, good ignoring of small debris, the possibility of detuning from the ground and radio interference from power lines, telephones, and other electronics.
A detection depth of 3-4 meters for a large target (a metal helmet) is sufficient for most tasks; there is no need to chase depth at the expense of stability or filtering debris. Popular wisdom says: “a bad head gives no rest to your feet.” And in our case, the wrong choice of a metal detector is fraught with fruitless excavations to great depths.
Criteria for choosing a metal detector from Aliexpress 2020–2021
Search depth
The most important criterion, it directly depends on the operating frequency of the device. 2.5 kHz metal detectors are designed to detect large metal objects only and do not detect coins, gold or other valuable metals. The 7.5 kHz frequency is designed to work at depths of up to a meter, which is great for beginners. Metal detectors 10-20 kHz are highly conductive; they are suitable for searching for any metals in a wide variety of soils.
Ability to distinguish between different metals
Often metal detectors are set to one or two types of metals. Before purchasing, you must decide what you will be looking for. Most ancient valuables were made of copper, and coins were made of silver. A metal detector for gold hunting must be sensitive and have a wide adjustment range.
Additional settings
If you want to prevent certain parts of the ground from interfering with your search, the ground balance function is necessary. Calibrating your metal detector can significantly improve its performance. Search programming is also a useful function; it will help configure the device to work in specific conditions.
The best cheap metal detectors in 2021
Garrett ACE 400
Garrett ACE 400
Many experts recommend the Garrett ACE 400. This metal detector is equipped with a special sound for iron, digital target identifier and frequency control. All this will help you dig up more valuable things and less metal waste. This device has five search modes built-in, as well as eight sensitivity settings, which allow you to search in areas with highly mineralized soil, near power transformers and radio signals.
Digital target identification on the Garrett ACE 400 helps you correctly determine what type of metal a potential find is made of. The numbers are designated from 0 to 99, and they correspond to a list provided by Garrett that can easily determine the metal content of an object.
The device is very versatile and can be used in a variety of locations.
View price
Nokta Makro Simplex
Nokta Makro Simplex
Simplex is a simple and easy to use metal detector. It has automatic ground balancing and four preset search modes, including a beach mode. Includes 11" search coil. The Simplex is fully submersible up to 10 feet underwater and has excellent lighting for nighttime and underwater use. He has excellent discrimination.
View price
Minelab Vanquish 340
Minelab Vanquish 340
We recommend the Minelab Vanquish 340 for searching for relics, interesting artifacts, and metal plastics. Vanquish is Minelab's newest metal detector that combines the features of several devices into one. It includes a 12-inch coil, adjustable frequency range, and red LED lighting. The Vanquish is available in other models, including the 440, 540 and Pro Pack. The difference is in price and some characteristics.
View price
Garrett Ace 250
Garrett Ace 250
Another ICQ in our rating is the Garrett ACE 250. This is a legendary metal detector. It is easy to set up and easy to use, and is recommended for both beginners and professionals. It is versatile and reliable like a Swiss watch.
View price
Garrett ACE 300
Garrett ACE 300
And again Garrett, and again “Asya”. The Garrett ACE 300 is the best all-around metal detector. This device has five separate search modes for detecting coins, jewelry and relics. Like the ACE 400, the ACE 300 allows you to adjust the frequency of the ground mineralization detector, which eliminates the ingress of debris.
It provides clear and responsive sound with modulation and features a coin depth detector.
View price
Minelab Vanquish 540 Pro-Pack
Minelab Vanquish 540 Pro-Pack
The Minelab Vanquish 540 ProPack metal detector is well suited for beaches. ProPack has two coils - 8" and 12" for greater depth and accuracy. The coils are waterproof to 3.3 feet, and the control unit is also waterproof with the included rain cover.
View price
Which professional metal detector to choose
This segment provides accurate and high-quality metal searches even at significant depths. Most often, professional equipment has a wide range of settings, and the cost is several times higher than that of standard models. It is worth noting that novice users will find it difficult to cope with such a technique. First of all, you need to answer a few questions:
Questions and answers How much should you expect? The difference in cost can be very large, you should immediately determine your budget and, within this framework, look for a suitable option. What type of search will be mainly used? You need to decide what to use the metal detector for, these could be small items made of precious metals or large objects (for example, wartime equipment). Select the option that is most suitable. What should the range of settings be? The wider it is, the more opportunities there are for fine-tuning the device and effective search in different conditions.
Also, when choosing professional equipment, you should pay attention to such nuances as ease of use and reliability of the design. When a significant amount of money is spent on a purchase, you need to select something that will provide maximum comfort during the search process and will not require frequent repairs.
TS166A
This option from China is ordered by those who search for scrap non-ferrous and ferrous metals.
VIEW ON ALIEXPRESS
Advantages and disadvantages
- The presence of a built-in backlight allows you to work at any time of the day.
- High-quality discrimination mode that allows you to tune in to a specific type of metal.
- To increase the sensitivity of the device, the electromagnetic background of the earth is turned off.
- You can connect headphones to work in quiet mode.
- Does not tolerate high humidity well and is not suitable for working in the rain.
- Effective only when searching for large objects.
- The lithium battery is non-removable.
Main characteristics:
- Working depth – up to 120 cm.
- The minimum metal size is 30x30x1 cm.
- Operating temperature range – from 0 to +50°С.
- Air humidity 85% or lower.
- Battery type: lithium built-in.
- Total weight: 1.6 kg.
The model is effective when searching for large objects and is well suited for working in areas with heterogeneous soil.
TX-850
This option is great for finding small items made of precious metals, as well as other small items. Its main purpose is a professional search for treasures and exploration of places where hostilities took place.
VIEW ON ALIEXPRESS
Pros and cons You can set discrimination so that when certain metals are detected, no signal is given. Voltage control oscillator allows you to adjust the signal strength. Waterproof coil. Background settings are set automatically depending on the soil. Does not tolerate high humidity and rain well. Without experience, it is difficult to understand the settings.
Model characteristics:
- Working depth – 150 cm, at maximum settings – 250 cm.
- Detects a Soviet 5 kopeck coin. at a depth of 40 cm.
- The length of the rod is from 106 to 132 cm.
- Frequency: 19.23 kHz.
- Operating humidity from 0 to 90%.
- Working hours – up to 15 hours.
Advice!
It is better to purchase 2-3 coils for different purposes.
TX-950
Ideal for finding coins and other small objects, even if they lie quite deep. It is used both in treasure hunting and in forensics.
VIEW ON ALIEXPRESS
Advantages and disadvantages
- Detects metal measuring 30x30x1.5 cm at a depth of 1.5 m with standard settings.
- Work up to 15 hours on one battery (6F22 9V).
- Moisture and dust protection of the detector.
- Determines what metal the detected object is made of.
- The settings process is complex and requires preliminary preparation.
- Large sizes, which complicates transportation and use.
Characteristics:
- Search depth – up to 250 cm.
- Operating frequency 6.79 kHz.
- Operating time – 15 hours (battery 6F22 9V).
- Weight – 1.6 kg.
- Air humidity – from 0 to 90%.
The model allows you to make fine adjustments to determine different metals.
Metal detector for gold and jewelry GH 20
One of the advantages we can immediately highlight is that the device detects precious metals and small jewelry well. And even a beginner can understand the menu. In addition, it is universal in use, comfortable to hold in your hand, even despite its heavy weight. The main advantage of this metal detector is that it can withstand low temperatures. Disadvantage: if you have no experience, it will be quite difficult to assemble the device after delivery. However, the kit includes instructions to make the preparation process easier. It is best to look for gold and silver.
VIEW ON ALIEXPRESS
MD-6350
A very sensitive option, capable of finding small objects at significant depths.
VIEW ON ALIEXPRESS
Advantages and disadvantages
- Qualitative discrimination of metals.
- 8 levels of sensitivity indicator settings.
- The device analyzes the condition of the product.
- Detects objects at a depth of up to 2.5 m.
- The coil is waterproof, but the device itself is afraid of water.
- Quite a high cost.
Characteristics:
- Detection depth up to 250 cm.
- Frequency 8.58 kHz.
- Weight 2.2 kg.
- Waterproof reel.
The instrument has a wide range of settings, so it is often used during archaeological excavations.
How to choose a good cheap metal detector?
It all depends on what you plan to look for. If you are just starting to search and have not yet decided, take a simple universal model. You don't need the bells and whistles that some expensive devices have. But you need a quality device.
Finding and digging up metal is not a difficult task. You wave the coil at yourself and catch the signal. But in littered places it’s not worth digging everything. You will find nothing but tin cans and nails, you will be disappointed in the cop at the very beginning of your “career”. Therefore, it is worth paying attention to devices that can quite clearly determine what is lying under your feet. Of course, you should immediately take very specific models if you are focused on searching for gold, or specifically on underwater searching.
We tried to combine in this rating universal metal detectors that are suitable for everyone. Inexpensive, but high quality.
Some terms that you may encounter in the description of devices
Ferrous metals : metals containing iron. Non-ferrous metals - brass, gold, silver, nickel, tin and lead.
Mineralization : the amount of iron and salt in the soil. Examples of mineralized soil include black sand on beaches (from iron), redness in mud (from iron), and salt in sand on saltwater beaches.
Interference : Anything that has an electromagnetic field, such as cell phones or power lines, can interfere with the detector's signal.
Control Unit : Contains the controls, speaker, batteries and processor of the metal detector.
Coil : This is what actually “sees” the metal in the ground. Search coils of different sizes and shapes operate differently. Interestingly, smaller coils are the most sensitive, while larger coils can penetrate deeper underground.
Discrimination : You can filter out different types of metal or items by changing the settings. So that, for example, the device ignores iron.
Ground Balance : Metal detector settings for different soil types and mineralization.
Dear Chinese metal detectors
GRAIGAR GFX7000
The next device is a little more than completely similar to the Minelab GPX5000. It's called the GFX7000 and is sold under the GRAIGAR brand. The price is 70,000 rubles, which is three times cheaper than minelab.
It would seem that we should take it. But, taking into account the delusional technical description, as well as the obvious inconsistency with its picture (a round coil of 8 inches is shown by eye, but it is stated to be 11DD), the editors recommend that you think very seriously about the advisability of such a step. At the very least, it’s worth looking for a Russian seller of such devices so that you have someone to ask if something goes wrong.
VIEW ON ALIEXPRESS
TM99S
The next participant in the hit parade is a device that is extremely reminiscent of the Minelab Gold Monster 1000. It is called TM99S, costs 55,000 rubles, and is claimed to be waterproof up to 3.5 meters.
Of the technical characteristics, only the operating frequency carries a payload - 6.99 kHz. Everything else could not be written.
For reference: the original minelab can be bought for 60,000 new.
VIEW ON ALIEXPRESS
The best highly targeted metal detectors
In this category we included devices of various specializations, which in their format did not fit into any other group, but nevertheless deserve mention.
Aideepen DIY Kit Metal Detector
Assemble it yourself Rating (2020): 4.8
Kit for assembling a homemade metal detector with your own hands. To do this, you will have to study the circuit and work a little with a soldering iron; those who are especially advanced can also try to improve the design. As a result, you will get a funny device that reacts to metal at a distance of about 4-5 cm from the disk. Such pleasure costs pennies, but you need to understand that there is no serious sensitivity to metals to speak of and the whole essence of the DIY Kit Metal Detector lies precisely in the pleasure of the assembly process. But the device is ideal if you want to get your child interested in treasure hunting and electronics at the same time.
VIEW ON ALIEXPRESS
Huppgou XQ116
Guarding security Rating (2020): 4.8
Detectors of this type are usually used by various types of law enforcement agencies (police, security, military, etc.) for quite obvious purposes - detecting unwanted objects on the human body (of course, they can also search for treasures , but the efficiency will be clearly low). In their reviews, buyers note that the sensitivity of the XQ116 is average, but the metal detector copes with the assigned tasks quite quickly, reacting even to coins, not to mention larger and more interesting objects like a knife or pistol. In addition, the device is good at “catching” mobile phones, which means it is also suitable for such specific control.
VIEW ON ALIEXPRESS
LOMVUM MODEL 1
A good helper in everyday life Rating (2020): 4.9
Today, metal detectors are used not only to search for treasures and valuable items, but also for purely practical purposes, for example, during repairs. Such equipment helps to listen to walls and determine the location of wiring, and is also used for other household tasks. LOMVUM is similar in appearance to pinpointers (from the category above), but unlike them, it is much less versatile and is designed specifically for indoor work.
In addition to metal hidden in walls, floors and ceilings, this metal detector will help you detect cable, wood and alternating current (different scanning modes are responsible for this, each material has a maximum recognition depth). In general, the device copes well with its functions, however, as buyers note, it is important to “get used to” it and understand the intricacies. This is not so easy to do, given that there are no instructions included in the kit - you can only ask the seller to send a short guide.
VIEW ON ALIEXPRESS
OOTDTY 1AA80
Ideal for searching underwater Rating (2020): 5.0
If you carefully read our rating, you should have noticed that some of the devices presented above have “water resistance” as one of their properties. This is an excellent quality, but there it was used more for marketing purposes - there is no objective sense in looking for something underwater with the same MD-6350, the device may, of course, not be damaged (which is not at all obvious), but it is of little use either will not be.
Another thing is the metal detector from OOTDTY, which was originally designed specifically as an underwater detector, with all the ensuing features. The manufacturer promises full operation at a depth of up to 30 meters under water, automatic adjustment, vibration technology for receiving signals, etc. In practice, none of the users have yet tried to test the work at such a depth, but on small dives the metal detector performs well, actually reacting to all metals, albeit at a very short distance. In general, if you ever want to collect coins thrown by tourists from the bottom, or maybe something more interesting, then this device will be quite a good helper.
VIEW ON ALIEXPRESS
Rating of the best metal detectors
When compiling this rating, we took as a basis customer reviews and a number of characteristics that will help a novice treasure hunter choose a good, high-quality and easy-to-use metal detector. When choosing the right device, we paid attention to the following criteria:
- Weight and ease of use;
- Easy settings;
- Sensitivity level;
- Ability to select a discrimination mode;
- Search depth;
- Sound adjustment;
- Presence of precise target designation mode;
- Price.
Also important for the user is the build quality of the device and its affordability.
The best deep metal detectors
Depth detectors are needed to find large metal objects at great depths. Therefore, they are used in places of historical significance or when servicing underground communications.
A distinctive feature of such models is the lack of discrimination: the device will give a signal that there is metal somewhere here, but the user will only know what metal it is when he digs it up.
Another feature is the concentration only on deep treasures: the device will see a pipeline 6 meters underground, but will not even notice a coin at a depth of 5 cm.
However, the best deep metal detector allows the user to change the coil to expand the detector's uses. True, such a metal detector costs at least 50 thousand rubles.
3White's TM 808
Functionality 9 Characteristics 9 Convenience 6 Reliability 8 Overall rating, calculated as the average value of the sum of the main parameters. 8.0 Rating Pros
- One battery charge is enough for 20 hours of searching
- High sensitivity and search accuracy
Minuses
- The weight of the device is more than two kilograms
The analog device operates according to the VLF circuit using proprietary Blue Maxx Technology Antennas technology. There is only one operating frequency - 12.5 kHz. Due to such a low frequency, the use of a metal detector is not permissible on all types of soil. However, where the detector will work, it will find everything - from small treasures at a depth of 1 meter to a car at a depth of 6 meters.
The only thing that can cause inconvenience is the settings system. To adjust the threshold tone, the volume of the sound signal and to tune out the ground, you will have to turn the potentiometer knobs: there are no usual buttons and a screen here.
Advantages
- affordable price;
- simple design;
- high-quality assembly;
- good detection depth.
Flaws
- unreliable coils;
- fear of moisture.
2FISHER Gemini-3
Functionality9Characteristics9Convenience7Reliability7Overall rating, calculated as the average value of the sum of the main parameters.8.0RatingPros
- Easy housing assembly
- Operates on 16 batteries
Minuses
- Instead of an armrest, there is an inconvenient carrying strap
The device fully justifies its high cost: the operating frequency of 81.9 kHz is suitable for tracing pipelines and searching for local objects. When searching for small treasures, the user can count on a depth of up to 3 meters, and something larger can easily be found deeper underground.
There are several search modes, including induction, when the receiver and transmitter are spaced a considerable distance from each other. Additionally, you can adjust the sensitivity.
Fisher Gemini 3 6 m
pros
- search depth
- compactness
- light weight
- performance
Minuses
- price
From 54250 ₽
One of the best deep metal detectors for searching for coins and gold. This model, in terms of its characteristics, is only slightly short of professional ones. The device recognizes metals well at a depth of up to 6 m. Ideal for geologists, builders, prospectors and treasure hunters.
Advantages
- versatility of use;
- mobility;
- affordable price;
- reliability.
Flaws
- Unstable settings.
Garrett GTI 2500
Functionality10Characteristics9Convenience8Reliability8Overall rating, calculated as the average value of the sum of the main parameters.8.8RatingPros
- Pin-Point Mode
- Multiple beeps to choose from
- Convenient controls and display
Minuses
- Short operating time without recharging
The best metal detector in terms of search depth is a professional Garrett detector with a microprocessor unit. It operates at a fairly low frequency of 7.2 kHz, allowing you to find metal at great depths. However, if desired, the user can manually adjust the frequency: there are 8 options for different search conditions.
See also: The best women's pads, TOP-15 rating of good pads 2020
The main advantage of the model is its coil. It supports Imaging technology, thanks to which it allows not only to find an object underground, but also to determine its approximate dimensions.
Detech SSP-5100
Rating: 4.5
Unique search technology is used in the Bulgarian metal detector Detech SSP-5100. Thanks to PI induction, the manufacturer managed to achieve a record detection depth (9 m). In real conditions, experts found machine guns at a depth of 2 m, and soldiers’ helmets - 1.6 m. The radiation frequency is 100 Hz, but the search frame is quite large - 1000x1000 mm. Although the device can operate in automatic mode, it cannot be done without an assistant. The advantages of the device include a clear menu and a clear display. The high price prevented the metal detector from rising to a higher position.
Russian search engines praise the efficiency, reliability and ease of setting up the device. Beginners quickly master it, but the high price becomes a deterrent when purchasing.
Advantages
- large detection depth;
- convenient setup;
- unpretentiousness;
- clear display.
Flaws
- high price;
- overall frame.
Detech EDS Gold Catcher – deep search for jewelry
This detector is “tailored” to detect gold and jewelry, and it has an extensive list of preset discrimination modes for these purposes. Gold Catcher can operate at high frequencies, which greatly simplifies the search for small objects and increases the depth of their detection.
The manufacturer has provided here for switching between normal and deep search modes, sensitivity adjustment, automatic manual balancing and pin point. The device comes with two 6″ DD and 10″ DD coils, as well as six AA batteries with a charger.
Advantages:
- Excellent functionality;
- Dual-mode search;
- Working with higher frequencies;
- Rich equipment;
- Possibility of connecting wireless headphones.
Flaws:
- There are no pre-installed search programs.
Detech EDS is designed for experienced users and is rightfully considered one of the best detectors in the mid-price segment. However, in terms of its capabilities and functionality, it is quite similar to a professional model.
AKA Signum MFT 7272M – for searches at great depths
A multi-frequency professional metal detector from a domestic manufacturer is the result of a refinement of the legendary model 72/72.
MFT technology and tuning to the required frequency in the range from 1 to 30 kHz provide high-quality search at any depth, especially if you switch to the “Turbo” mode. For example, the device is capable of detecting 5 Soviet kopecks at a depth of up to 2.5 m.
There are also plenty of other improvements here: SFT reduces interference from ground mineralization by 10 times, and the S-algorithm significantly improves discrediting. Identifying finds has also become easier thanks to the visual display of objects.
Advantages:
- Large detection depth;
- Advanced functionality;
- Visual and sound identification;
- Customizable discrimination masks;
- Automatic ground balance;
- Two sensitivity adjustment modes: automatic and manual.
Flaws:
- It is noisy and quickly drains battery power.
AKA Signum is best suited for searching for antiquities and military items at great depths.
Minelab Equinox 600 ground
9.7Rating Based on customer reviews (2019)
The Minelab Equinox 600 is often purchased by professional finders: the device is powerful enough to detect metal objects even at depth. It also has a fairly durable body, which is protected by a waterproof coating. Consequently, even in the rain, you can continue to work without fear for the fate of the equipment. The metal detector has high sensitivity, but it does not give false signals - all due to multi-frequency - and does not react to metal debris. This significantly saves the user's time and effort. The review authors also mention the low price, which puts the ground metal detector in the top of the cheapest professional models.
PROS:
- Sleek design and ergonomics;
- Light weight, reducing stress on the hands;
- Easy settings;
- Ability to multitask;
- You can charge the device using USB;
- Screen backlight.
MINUSES:
- The electronic unit cannot be disconnected;
- Frail armrest, prone to breakage;
- Regularly losing the target during the search.
Nokta&Makro Simplex Plus
Price: 24,300 rubles
Our top 10 metal detectors 2021 moves on. Nokta&Makro Simplex Plus is an elegant long-range device that can detect jewelry at a depth of 3 meters. It is convenient to use even in the dark. The fact is that the device is equipped with a bright flashlight, for which special thanks to the manufacturer. The case is IP68 waterproof, which means reliability and durability.
The interface is friendly and intuitive, so the metal detector is a good option for novice treasure hunters. The rubberized handle provides a secure grip. The main disadvantage is the buttons are tight. However, if you still don’t know which metal detector to buy for a beginner, here is the answer.
Nokta Invenio Smart
Best new product of 2018 Country: Türkiye Average price: 600,000 rub.
Rating (2020): 4.9 The Turkish deep metal detector with ground penetrating radar Nokta Invenio Smart made a real splash in Germany at the IWA OutdoorClassics exhibition, which was held in 2021. The new product is a unique intelligent system that not only signals the presence of metal in the ground, but analyzes the data and shows the object in a three-dimensional image. In addition, the device accurately indicates the depth of occurrence, as well as the overall dimensions of the find. With the help of a depth finder, you can find a variety of objects and anomalies in the ground. These could be small coins and weapons, tunnels and caves. You must first select the appropriate program. Experts note excellent discrimination, so the search engine will not be distracted by digging up unnecessary metals.
The high price does not yet allow a wide range of search engines to acquire such a device. Professional reviews admire the new product, predicting a great future for it.
Nokta Invenio Smart Detector PRO Package
Deep metal detector from Turkish manufacturers. This is one of the most successful new products of 2021. The metal detector is a unique “smart” system that not only signals the presence of a metal object in the ground, but also produces a three-dimensional image of it.
In addition, the device accurately indicates the depth of the find and its dimensions. The depth explorer allows you to search not only for metal objects as such, but also for caves or tunnels. To begin with, select the desired program. The level of discrimination is beyond all praise.
The device will not be “distracted” by unnecessary metals. The device has only one drawback: high cost. However, professionals believe that this is a price to pay for unique functionality.
Advantages
- three-dimensional image;
- excellent discrimination;
- programming capability;
- accurate depth determination.
Flaws
- high price.
Maximum depth
The Minelab GPZ 7000 is one of the models for detecting professionals and supports ZVT metal detection technology for confidently searching for antiques or gold nuggets at impressive depths. The GPZ 14 model coil installed on the device has dimensions of 355.6 x 330.2 mm and an elliptical shape. It is distinguished by effective protection against water ingress and can withstand even prolonged immersion in water to a depth of 1 meter without consequences. When fully charged, the standard battery of the metal detector ensures operation of the device for 7 hours.
Cost: from 500,000 to 560,000 rubles.
Minelab GPZ 7000
Treasure Hound depth attachment for Garrett GTI 2500 metal detector
The simplest modernization of a metal detector Country: USA Average price: 18,500 rubles.
Rating (2020): 4.7 See also: The best manufacturers of economy and premium jeans
A simple and affordable way to upgrade a regular Garrett GTI 2500 metal detector is to install a Treasure Hound depth attachment. The two-frame design turns an ordinary device into a depth finder. In this case, the ability to determine the type of metal is lost, but the search depth reaches 3 m. As for real research, the device sees a soldier’s helmet at a depth of 1.3 m, and artillery weapons can be found at around 1.7 m. It should be noted that the attachment is available long enough ago, so it does not make the best metal detector today. But the unusual device adds practicality to the search device.
Users in reviews point out all the pros and cons of the deep nozzle. The main advantages are accessibility and ease of modernization. But it cannot be used with other metal detectors, which significantly limits the scope of application.
Teknetics Alpha 2000 – detector with adjustable search depth
4.7★★★★★editorial assessment
88% of customers recommend this product
The entry-level model is suitable for searching for small objects made of ferrous and non-ferrous metals. The effectiveness of the device is ensured by 3 discrimination modes (All-Metal, Notch, Target ID) and 10 levels of indicating the search depth.
All information is displayed on an LCD display with two headphone jacks. The metal detector is powered by a 9-volt Kronov battery.
Advantages:
- Excellent ergonomics;
- Several discrimination modes;
- Sound three-tone indication;
- Setting the search depth;
- American assembly;
- Simple and intuitive controls.
Flaws:
- No ground balancing;
- Impressive dimensions.
In essence, the Alpha 2000 is the same Fisher metal detector, only more understandable and easier to learn, which is especially important for beginning treasure hunters.
Tesoro Tejon
Armed with such a metal detector, you can accurately search for gold. The compact and functional design allows manual adjustment of the threshold tone. The option makes it possible to search for small objects. The depth can be both significant and modest.
The manufacturer used ED-180 technology, which is an innovative development and is rarely found even in professional devices. Due to it, you can accurately determine metals that have low conductivity. Also, when taking into account multi-level discrimination, it is possible to eliminate identification errors of small objects.
It should be noted that there are a lot of preset search modes. You can adjust the sensitivity level, manually balance the ground, and also customize sound signals.
The metal detector runs on 8 AA batteries and weighs about 1.4 kilograms.
The main advantage is that it demonstrates excellent stability on mineralized soils, the search depth can be up to 2 m, and the response is very fast.
The downside is manual soil balancing. But overall, this is a good option for professionals who know how to work with sound identification.
Advantages
- ease;
- reliability;
- fast response;
- 25 year warranty.
Flaws
- batteries run out quickly;
- no sound control.
The best budget metal detectors from Alliexpress
MD-3028
pros
- high accuracy
- fast response
- recognizes 7 types of metal
- 3-tone sound alarm
- LCD display with backlight
Minuses
- cannot be used for searching in water
VIEW ON ALIEXPRESS The
review of metal detectors from Ali in 2021 presents the universal model MD-3028 with high search accuracy and fast response. The device is capable of operating in two modes: “all metals” and “discriminator” and detects objects of different sizes made of any type of metal, including copper, gold, silver. A backlit display, battery charge indication, and signal volume control are also advantages of this device.
MD-4080
pros
- light weight
- sliding rod
- budget cost
- search depth
- waterproof reel
Minuses
- no instructions in Russian
VIEW ON ALIEXPRESS
The MD-4080 metal detector is well suited for beginner treasure hunters and scrap metal hunters. The device is incredibly easy to use, so it only takes a few hours to learn it. Using a detector that operates for a long time on a single battery, you can detect a large metal object at a depth of 25 cm, and a small coin - from 10 cm. This significantly saves time and effort on digging holes.
Quest XPointer Pro, from RUB 6,000
Quest XPointer Pro is an underwater pulse pinpointer. It can dive to a depth of 60 meters. It also has all types of alarms so as not to miss the target. This model has an ergonomic body, and its surface is covered with anti-slip material, so even during underwater searching there is no inconvenience in use.
To make your search even easier, the device is controlled by only two buttons. And depending on the conditions, you can change the sensitivity level, and then the pinpointer will definitely not miss anything.