TOP 20 best mobile air conditioners for home and apartment: rating 2020-2021 and how to choose a floor-standing model without an air duct

Rating of the TOP 20 best mobile air conditioners for home and apartment 2020-2021

What kind of “beast” is this mobile air conditioner?

This is a universal monoblock, not strictly tied to one point.
The operating principle is reminiscent of everyone’s favorite No Frost system in household refrigerators. Only the compressor is much more powerful and the cooled air does not enter hermetically sealed small cabinets, but directly into the room, and even with temperature, strength and direction of flow adjusted. Another feature: the heat from the “back wall” should not dissipate into the surrounding space, therefore it is forcibly removed to the street through a window or wall, for which all mobile air conditioners are equipped with special sliding plastic pipes. The only way. Otherwise, efficiency is zero, and energy costs will simply go down the drain (not a corrugated one).

The condensate evaporates and is removed outside automatically along with heated air (depending on the model) or collected in a special container for subsequent drainage. Alternatively, use a drainage hose to constantly remove moisture.

A small clarification: do not confuse mobile air conditioners with air conditioning humidifiers, which are ineffective in terms of actual cooling (without hoses, but also without a compressor), operating on the principle of air washers.

The best mobile ductless air conditioners

Manufacturers offer air conditioners without ducts. These are humidifiers that combine a cooling option. They can replace stationary split systems. The rating presents 4 models that are in particular demand among buyers.

Ballu BPAC-07 CE 17Y

Compact device in a stylish white casing . Designed for installation in

room up to 18 sq.m. This model is highly reliable for 2021.

The model is equipped with sensitive touch controls and a remote control. The weight is 25 kg, making the air conditioner easy to move around the apartment.

The noise level does not exceed 50 dB. The air conditioner operates at a power of 2.05 kW, which is combined with a flow rate of 5.5 cubic meters per minute.

Provides rapid cooling of the room . The model belongs to class A for energy efficiency. Energy consumption per hour is 0.78 kW.

Characteristics:

• serviced area - 18 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 780 W;
• cooling power - 2050 W;
• dimensions - 70×28.3×50.6 cm;

weight - 25 kg.

pros

• low cost;
• remote control;
• complete with corrugation;
• a light weight.

Minuses

• makes a lot of noise;
• slowly cools the room.

Ballu BPAC-09 CM

Floor standing air conditioner for ventilation and efficient cooling . Intended

for rooms up to 20 square meters. Has class A for energy efficiency.

Consumes only 950 W of energy.

Equipped with wheels for moving the device.

Operates on type R 410A. Equipped with several modes .

Presented in a compact case 27x69.5x48 cm, so it takes up minimal space. During operation, the noise level does not exceed 45 dB.

Characteristics:

• serviced area - 20 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 950 W;
• cooling power - 2638 W;
• dimensions - 27x69.5x48 cm;
• weight - 26 kg.

pros

• affordable;
• copes with its task;
• easy to install;
• easy to manage.

Minuses

• noisy;
• one-button control.

Electrolux EACM-10HR/N3

Compact monoblock design with options for ventilation, heating, dehumidification and cooling of air.

Suitable for installation in rooms up to 25 square meters. Control is electronic and using a remote control.

During the cooling process, the power is 2.93 kW, heating - 2.78 kW.

Despite this, energy consumption does not exceed 1.08 kW for cooling and 0.84 kW for heating.

The noise does not exceed 42 dB. The model has automatic condensate removal, a timer and night mode.

Characteristics:

• serviced area - 25 sq.m;
• air flow - 6.83 cubic meters. m/min;
• power consumption - 840 W;
• cooling power - 2930 W;
• heating power - 2780 W;
• dimensions - 48x79.5x40 cm;
• weight - 27 kg.

pros

• stylish appearance;
• several modes;
• quickly heats and cools;
• thoughtful package.

Minuses

• difficulties with attaching the corrugation to the window;
• It is very noisy in any mode.

Electrolux EACM-08CL/N3

Model from a reliable brand with a stated service area of ​​20 square meters.

Supports several operating modes.

During the cooling process, it operates at a power of 2.4 kW, which, combined with a flow of 5.5 cubic meters per second, helps to quickly cool the room.

Due to its compact dimensions of 43.5x69x33 cm, the model is suitable for small apartments.

The device has self-diagnosis for quick detection of breakdowns and a timer for auto-shutdown after a selected time.

Characteristics:

• serviced area - 20 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 840 W;
• cooling power - 921 W;
• heating power - 2400 W;
• dimensions - 43.5x69x33 cm;
• weight - 25 kg.

pros

• suitable for a small room;
• beautiful and neat appearance;
• economical energy consumption;
• simple controls.

Minuses

• makes a lot of noise;
• cools slightly in silent mode.

Pros and cons of a mobile air conditioner

Advantages

• Can be easily moved between rooms, cooling the area that is currently needed.
• The best option for rooms where a conventional split system cannot be installed. For example, external air conditioning units violate the aesthetics of the facades of architectural monuments. Therefore, in the centers of many cities there is a ban on their installation. A floor-mounted mobile air conditioner will be your only salvation.
• You can do without drilling walls and other “joys” associated with installation work.
• Buying a mobile air conditioner for an apartment is much cheaper than buying a stationary one.
• A home mobile air conditioner is an ideal solution for rental housing.

Flaws

• A mobile air conditioner without an outdoor unit is less efficient than a stationary one.
• When the heat removal hose is routed out the window or door, a gap remains through which hot air again enters the room. For maximum efficient cooling, you need to figure out how to seal it. Some people seal the gap with film or other similar materials. A radical option is to make a hole in the wall for the hose. Then the mobile air conditioner begins to play the role of a stationary one

www.hobot.by

3250 rub.

All stores (5)

Air conditioner Gree Lomo Inverter Arctic GWH18QD-K3DNC2G

from 3250 rub.

Split system, wall-mounted unit, inverter, refrigerant R410A, cooling power 5.13 kW, heating power 5.27 kW, noise 46 dB, filter against: dust, odors, allergens, bacteria and viruses.

Description Where to buy (5)

• A mobile air conditioner is noticeably louder than a stationary one. Not everyone will be able to sleep in the same room with the unit on. As a rule, the range of adjustment of blowing modes is not as wide as in stationary air conditioners.

www.hobot.by

1390 rub.

All stores (2)

Split system Zanussi Perfecto DC Inverter ZACS/I-07 HPF/A17/N1

from 1390 rub.

Split system, wall-mounted unit, inverter, R410A refrigerant, cooling power 2.2 kW, heating power 2.3 kW, noise 21 dB, dust filter.

Description Where to buy (2)

The best mobile air conditioners that work only for cooling

Models with cooling are in particular demand, since this is the main mode for the air conditioner. To buy the most suitable device, it is important to evaluate the advantages and disadvantages of popular models.

Ballu BPAC-18CE

A high-power device with high performance . Suitable for

installations in rooms up to 50 square meters.

The declared noise level is 52 dB, due to which the air conditioner does not cause discomfort.

Supports ventilation, dehumidification and cooling options, as well as automatic mode. Control is carried out using the remote control .

Thanks to the flow of 7.5 cc. m/min and a power of 5.7 kW in cooling mode, the device is not inferior to stationary split systems.

Characteristics:

• serviced area - 50 sq.m;
• air flow - 7.5 cubic meters. m/min;
• power consumption - 840 W;
• cooling power - 5700 W;
• heating power - 2180 W;
• dimensions - 36.5×77.5×56.8 cm;
• weight - 45 kg.

pros

• several speeds;
• filters the air;
• uses energy economically;
• compact size.

Minuses

• makes noise;
• The remote control sometimes doesn't work.

Ballu BPAC-12 CE 17Y

A device for servicing premises up to 30 square meters . Due to

compact size 283x700x506 mm does not embarrass residents.

Weighs 28 kg and is equipped with wheels for quick movement from place to place. Has class A for energy efficiency.

Consumes 1.25 kW. Due to the power of 3.22 kW, this takes a minimum of time . Claimed cooling capacity is 11,000 BTU.

Characteristics:

• serviced area - 30 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 1250 W;
• cooling power - 3220 W;
• dimensions - 70×28.3×50.6 cm;
• weight - 28 kg.

pros

• flow regulation;
• low electricity consumption;
• simple controls;
• filters air from dust.

Minuses

• noisy compressor;
• The cord is only 1 meter.

Timberk AC TIM 12C P8

Compact device with ventilation, cooling and dehumidification options . Clears the air from

harmful impurities and cools the room in the shortest possible time.

Designed for rooms up to 35 sq.m.

Temperature adjustment is available from 18 to 35 degrees.

The noise does not exceed 45 dB . The device requires only 1.25 kW to operate. The model is made in a 27x48x69.5 cm case, so it will not take up much space.

Characteristics:

• serviced area - 30 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 1250 W;
• cooling power - 3520 W;
• dimensions - 27x48x69.5 cm;
• weight - 28 kg.

pros

• cools well;
• compact body;
• one button control;
• The condensate evaporates automatically.

Minuses

• the compressor is very strong;
• the wheels cannot be removed.

Zanussi ZACM-09 MS/N1

A practical and easy-to-use device, made in a compact body and equipped with wheels..

Designed for rooms up to 23 sq.m. Operates in drying and cooling mode. In this case, the intensity reaches 0.9 liters per hour.

An air filter is provided to clean the air from harmful impurities and a self-diagnosis system.

The power of the device is 2640 W, and the energy consumption is 980 W.

Characteristics:

• serviced area - 25 sq.m;
• air flow - 5.83 cubic meters. m/min;
• power consumption - 980 W;
• cooling power - 2640 W;
• dimensions - 43.5x71.5x35 cm;
• weight - 29 kg.

pros

• cools effectively;
• takes up little space;
• affordable;
• controlled via wifi.

Minuses

• makes a lot of noise during operation;
• installation difficulties.

Control systems for mobile (floor-standing) air conditioners

The simplest mobile (floor-standing) systems are equipped with electromechanical control devices - buttons and knobs for temperature control. Many people like the simplicity and convenience of such models, because there is nothing superfluous in the control system and adjusting the microclimate in the room is simple.

However, the cheapest air conditioners of this type do not have protection against frequent starts, that is, there is no delay of 3 minutes. Frequent starts can lead to engine malfunctions and equipment failure. When turning off such devices, you need to make sure that the mobile air conditioner does not turn on on its own. Mechanically controlled devices are uneconomical.

If the unit is equipped with an electronic system, then it can be controlled using a remote control from a distance not exceeding 8 m. The advantage of such monoblocks is more accurate control of the temperature in the room. There is also an additional option - setting the device to operate on a timer (24 or 12 hours). If you wish, you can set a program so that the device turns off after 2 hours, when you are already asleep. Or, conversely, set the air conditioner so that it turns on half an hour before you return home. This way, when you arrive, the temperature in the living room, bedroom or kitchen will be comfortable.

The best mobile air conditioners with heating

Cooling is the main mode of the air conditioner. In addition, some models provide heating. An additional function affects the price of the device, but makes it more functional. Below are the features, pros and cons of popular models.

Ballu BPAC-20CE

Compact device for rooms up to 55 m² . Easily controlled using

a touch panel on the body and a remote control with two buttons.

Due to the air flow of 7.5 cubic meters. m/min and a power of 6000 W quickly cools the room.

In dehumidification mode, consumption is up to 1.67 l/h.

There are 3 speeds and a night mode with minimal noise. The size of the device is only 36.5×77.5×56.8 cm, which makes it mobile.

Characteristics:

• serviced area - 25 sq.m;
• air flow - 7.5 cubic meters. m/min;
• power consumption - 2300 W;
• cooling power - 6000 W;
• dimensions - 36.5×77.5×56.8 cm;
• weight - 46 kg.

pros

• high power;
• compactness;
• mobility;
• suitable for large rooms.

Minuses

• high price;
• condensation floods the floor.

Electrolux EACM-18HP/N3

A device for efficient cooling and heating . Designed for rooms up to 50

square meters.

Equipped with a filter to clean the air from germs and harmful impurities. Supports temperature range from 16 to 32 degrees.

Produces noise within 50 dB.

The weight of the air conditioner is only 38 kg, and the dimensions are 41.5x87.3x63 cm. In the “Cooling” mode, the power is up to 5.2 kW, “Heating” - up to 4.5 kW.

In this case, energy consumption does not exceed 1.95 kW.

Characteristics:

• serviced area - 50 sq.m;
• air flow - 10.33 cubic meters. m/min;
• power consumption - 1950 W;
• cooling power - 5270 W;
• heating power - 4500 W;
• dimensions - 76.8x49x37.6 cm;
• weight - 36 kg.

pros

• convenient remote control;
• high energy efficiency;
• availability of a replaceable filter;
• Cools and heats quickly.

Minuses

• heavy;
• makes a lot of noise.

Electrolux EACM-13HR/N3

Portable model that functions as a fan, dehumidifier, air conditioner and heater.

Designed for rooms up to 33 square meters. m. The device weighs only 24 kg and has compact dimensions, so it is easy to move between rooms.

The device requires 1.13 kW per hour for heating and 1.39 kW for cooling.

Control is simple using a one-button remote control . The stated cooling capacity is 13,000 BTU.

Characteristics:

• serviced area - 33 sq.m;
• air flow - 6.83 cubic meters. m/min;
• power consumption - 1950 W;
• cooling power - 3810 W;
• heating power - 3660 W;
• dimensions - 48x79.5x40 cm;
• weight - 30 kg.

pros

• average noise level;
• blows icy air;
• does not require complex installation;
• uses electricity economically.

Minuses

• big size;
• high price.

Additional functions of a mobile (floor) air conditioner

Additional functions of a mobile (floor) air conditioner include:

Automatic temperature maintenance

A device equipped with this function can automatically maintain the set temperature. To do this, the air conditioner analyzes the current temperature readings and switches to the desired mode: cooling, ventilation or heating. The device can also change the fan rotation speed and the direction of air flow.

Night mode

In night mode, the equipment operates with minimal noise. In this case, the fan speed is reduced to the lowest values, and the temperature smoothly decreases by 2-3 degrees (if the cooling mode is turned on) or increases (when the heating mode is activated).

Fine filters

If the device is equipped with fine filters, particles up to 0.01 microns in size are removed from the air. The air in the room is cleaned of microorganisms and pollen.

Auto restart

In cases where there is a power failure or the operation cycle is completed, the air conditioner will automatically restore its previous operating mode using the auto-restart function.

On/off timer

On/off timer - This handy feature is useful for preparing the room for your return or turning off the device when you fall asleep.

Adjusting the air flow direction

Air conditioners with this function allow you to adjust the direction of flow so that the air is blown in the desired direction. This is done using built-in guides that can be rotated up or down, left or right.

Display

A convenient addition is the display on the indoor unit. It displays information about temperature, air humidity, set mode and other information.

The best mobile air conditioners for small rooms (up to 20 sq. m.)

The range of well-known brands includes compact air conditioners designed for installation in small rooms. They effectively cope with their task and at the same time are highly energy efficient. The rating presents the 3 best models according to consumers.

Ballu BPHS-08H

The portable model with a power of 2440 W effectively copes with the maintenance of rooms up to 20 square meters. m .

There is a heating mode and a drying option with a capacity of up to 20 liters per day, as well as a timer to automatically turn off the device after a set time.

Energy consumption is only 890 W when cooling a room and 800 W when heating.

Characteristics:

• serviced area - 20 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 890 W;
• cooling power - 2050 W;
• heating power - 3540 W;
• dimensions - 42x70x32 cm;
• weight - 24 kg.

pros

• relatively quiet;
• easy to operate;
• heats the room well;
• made in a modern building.

Minuses

• high price;
• condensation drips onto the floor.

Zanussi ZACM-07 MP-III/N1

Compact air conditioner that combines cooling and dehumidification of excess moisture in the room . The model does not lose its relevance in 2021.

It is highly efficient due to its power of 2050 W and air flow of 5.5 m³/min.

Suitable for installation in rooms up to 20 square meters.

Supplemented with a turbo mode for accelerated room cooling . The condensation evaporates automatically, eliminating damage to the floor. Consumes 780 W of energy per hour.

Characteristics:

• serviced area - 20 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 780 W;
• cooling power - 2050 W;
• dimensions - 35.4x69.8x34 cm;
• weight - 20 kg.

pros

• suitable for small rooms;
• easy to install;
• weighs little;
• equipped with several speeds.

Minuses

• makes a lot of noise;
• It’s difficult to get the corrugation out of the window.

Ballu BPAC-07CM

An ergonomic device equipped with wheels for easy movement between rooms . This model has proven itself well in 2021.

Designed for rooms up to 15 square meters. Combines fan and air conditioning options.

The effectiveness of the device is evidenced by an air flow of 5.5 cubic meters. m/min and power 2080 W .

The device has a cooling capacity of 7000 BTU. At the same time, it consumes no more than 0.78 kW per hour.

Characteristics:

• serviced area - 20 sq.m;
• air flow - 5.5 cubic meters. m/min;
• power consumption - 785 W;
• cooling power - 2080 W;
• dimensions - 27x69.5x48 cm;
• weight - 25 kg.

pros

• quickly cools the room;
• comfortable in using;
• takes up little space;
• energy efficient.

Minuses

• slightly more efficient than a conventional fan;
• makes a lot of noise.

What operating modes can be present in a mobile air conditioner?

The list of functions built into modern climate control equipment can be varied:

• cooling mode;
• heat;
• air dehumidification;
• ventilation;
• cleaning

There are some restrictions regarding mobile air conditioners - these devices cannot always be used in all conditions. It is recommended to learn in advance, even before purchasing the device, about all the capabilities and operating modes.

Cooling mode

Air cooling is the main operating mode of the air conditioner, present in all models. It is used only in summer, because in winter there is no need to artificially cool the room - it is easier and more economical to receive cold air through a slightly open window.

To lower the air temperature in monoblocks, the capabilities of a vapor compression refrigeration machine are used. This device is similar to units installed in conventional refrigerators. Manufacturers recommend turning on the air conditioner at temperatures between 17 and 30°C. Less commonly, the boundaries of the operating range are slightly wider - from 16 to 35°C. If the room temperature significantly exceeds the specified limits, then malfunctions occur in the operation of the device, and it will not be possible to obtain the desired effect from the operation of the device. Breakdown due to violation of the rules of use is not a warranty case, so you will have to repair the device at your own expense.

If the room temperature drops to the value you set, the air conditioner turns off cooling. After this, the device switches to ventilation mode. The cooling mode will be automatically activated when the room temperature exceeds the set value.

Heating mode

In Russian conditions, heating mode may be required at any time of the year. Mobile devices successfully cope with heating the room, not inferior to fan heaters and oil radiators. Moreover, they can be used all year round.

To heat the air, mobile air conditioners can be equipped with electric heaters (most often) or produce heating operating in heat pump mode, as is done in stationary split systems.

Built-in electric heaters, which mobile air conditioners use to heat the air, work great at any temperature. The heaters are steel heating elements or a heating coil. This design is durable, reliable and unpretentious.

There are models of air conditioners that heat air in heat pump mode, that is, in the process of reversing the refrigeration cycle. In this case, excess cold is removed from the room through a hose. This economical heating method can be used at temperatures between 5 and 21°C. To operate such devices in winter or autumn, “gapless” installation of climate control equipment will be required. If you run the hose through a slightly open window, then due to the draft, the air conditioner’s power may not be enough for heating.

How quickly the desired temperature is reached depends on the fan speed. Typically, mobile air conditioning systems have three speeds:

• high;
• average;
• low.

Microprocessor-controlled devices operate in automatic mode. It is enough to indicate the desired temperature, and the microprocessor will analyze the actual and set values, selecting the desired operating mode: cooling, heating or ventilation without heat treatment.

Dehumidification mode

All mobile monoblocks offered on the climate control market are capable of reducing air humidity. Dehumidification is useful in cases where you need to avoid condensation on walls and ceilings, so that wallpaper does not fade and paint does not crack. If you turn on the air conditioner in the room where clothes are dried after washing, textiles will dry in a matter of hours, even during rain and excess humidity. It is useful to dehumidify the air using mobile systems in pantries with food supplies: this allows you to protect bulk products such as flour, sugar, and salt from dampness and spoilage.

Air dehumidification is performed in cooling mode. But most models are equipped with a special function - removing moisture from the air without reducing the room temperature. In this case, the fan rotation speed is adjusted automatically. For maximum drying efficiency, keep doors and windows tightly closed.

In this mode, the surfaces of the evaporative heat exchanger are cooled to a temperature of 3°C. The air circulating in the air conditioner comes into contact with the cold plates, and moisture condenses on them. The condensate can then be removed in various ways. Some models of air conditioning units do not have a water tank; in them, moisture immediately flows onto a heated condenser, turns into steam and is removed through a hose outside the room.

In such a system, the refrigeration cycle is the most efficient. Other models of mobile devices have a tank in which condensation accumulates. If the air humidity is high, the container is filled with water within 2–3 hours, after which the compressor stops working. This means you need to empty the accumulated water from the tank.

If a device equipped with a tank is used in one place, then it is more profitable to create a stationary water drainage system. To do this, attach a hose to the drain pipe of the air conditioner, which is connected to the sewer. The sewer drain must be located below the drain pipe. After this, there is no need to control the filling level of the tank: the device does not turn off, since there is no overflow, and you can forget about the procedure for emptying the tank. If the air conditioner is additionally equipped with a pump, the accumulated water can rise to a height of 4 m or higher. This allows the use of mobile monoblocks to reduce humidity in the basements of private houses.

Air purification mode

The filtration function of mobile air conditioning systems is not yet sufficiently developed compared to stationary split air conditioners. However, all mobile devices have coarse air filters. The design of the filter element consists of a plastic frame with a fine polymer mesh. Filters require periodic maintenance - they must be washed with water. It is acceptable to use a neutral detergent.

When temporarily installing the device, the hose should be routed into a slightly open window. Stationary installation involves outlet through a hole in the glass.

For additional fine cleaning, you can equip the existing filter with a special insert made from materials with electrostatic properties or using activated carbon. After a year, these inserts should be replaced with new ones because they cannot be cleaned or restored.

Some models of mobile climate control equipment are equipped with built-in filters to remove fine impurities. There are also devices with a unipolar ionizer. They allow you to clean the air from suspended particles by transferring a negative charge to them so that these particles settle on the floor or walls that have a positive charge. Negative ions in small quantities are beneficial for humans: they create a surge of strength and a feeling of vigor.

The best mobile air conditioners for medium-sized rooms (from 21 to 30 sq. m.)

It is worth choosing a mobile air conditioner taking into account the area served, otherwise the device’s power may not be enough to cool the room. The rating includes models that, according to owners, do an excellent job.

Zanussi ZACM-12 MS/N1

The device has a compact body and stylish design . Performs the functions of a fan,

air conditioner and dehumidifier.

Effective in servicing rooms up to 35 square meters.

Equipped with R 410A reagent and an air filter for air purification, as well as a display showing the selected mode.

Operates at a power of 3.52 kW, at which the flow rate reaches 5.83 cubic meters/min . In this case, the noise is up to 45 dB.

Characteristics:

• serviced area - 30 sq.m;
• air flow - 5.83 cubic meters. m/min;
• power consumption - 1200 W;
• cooling power - 3520 W;
• dimensions - 43.5x71.5x35 cm;
• weight - 31 kg.

pros

• affordable;
• controlled by remote control;
• beautiful appearance;
• equipped with sleep mode.

Minuses

• makes a lot of noise;
• not equipped with heating.

Electrolux EACM-12CG/N3

Practical and energy-efficient device for servicing rooms up to 30 square meters.

Equipped with a filter to clean the air from germs. Operates in cooling, ventilation and dehumidification modes.

Equipped with an electronic control panel and comes with a remote control.

Operates on R 410A refrigerant. The power reaches 3.52 kW, and the air flow is 5.83 m³/min. This consumes up to 1.35 kW per hour.

Characteristics:

• serviced area - 30 sq.m;
• air flow - 5.83 cubic meters. m/min;
• power consumption - 1350 W;
• cooling power - 3520 W;
• dimensions - 45.8×77.4×37.2 cm;
• weight - 31.9 kg.

pros

• controlled by remote control;
• the condensate evaporates automatically;
• made in a modern design;
• equipped with three speeds.

Minuses

• makes a lot of noise;
• no wi-fi control.

Electrolux EACM-09CG/N3

With this device it is easy to create a comfortable microclimate at home . Due to the compact

Measuring 43.5x72x34 cm, the air conditioner takes up virtually no space.

3 modes are available, including ventilation and dehumidification. The model effectively copes with its tasks in rooms up to 23 square meters. m.

The advantages are minimum noise of 46 dB, high power of 2.64 kW and low energy consumption of 1 kW per hour.

At the same time, the declared cooling capacity is 9000 BTU.

Characteristics:

• serviced area - 23 sq.m;
• air flow - 5.67 cubic meters. m/min;
• power consumption - 1015 W;
• cooling power - 2640 W;
• dimensions - 43.3x72x34.2 cm;
• weight - 25 kg.

pros

• large selection of modes;
• compactness;
• temperature adjustment;
• excellent package.

Minuses

• noisier than a split system;
• takes in exhaust air faster than it releases it.

Electrolux EACM-12CG/N3 - 5th place

It is considered a professional model among floor-standing air conditioners. The device is equipped with a special chassis for quick movement and convenient transportation. Operates in several modes: cooling, ventilation and dehumidification of air masses.

For better air distribution, the body has automatic blinds. The air conditioner comes complete with a tube for additional condensate removal in conditions of high humidity.

The main characteristics of the Electrolux EACM-12CG/N3 include:

• high energy efficiency class;
• the presence of a night mode, which allows you to reduce noise during sleep;
• the presence of the I Feel function, which allows you to set the optimal temperature in a specific area of ​​the room;
• large coverage area of ​​30 sq. m.;
• no heating function;
• high cost compared to air conditioners with less coverage.

The best mobile air conditioners for large rooms (from 31 sq. m.)

Maintenance of large premises requires the installation of a powerful mobile air conditioner. Below are the characteristics, advantages and disadvantages of the models that are in greatest demand among buyers.

Electrolux EACM-13CL/N3

Compact portable air conditioner designed to serve up to 33 sq.m..

Effectively heats, cools and dehumidifies the room.

Equipped with a filter for air purification.

It is highly energy efficient.

With a power of 3.81 kW, it consumes only 1.35 kW of energy . In this case, the noise does not exceed 43 dB. The case provides a self-diagnosis option. The condensate evaporates automatically.

Characteristics:

• serviced area - 33 sq.m;
• air flow - 5.83 cubic meters. m/min;
• power consumption - 1356 W;
• cooling power - 3810 W;
• dimensions - 44x72x36.9 cm;
• weight - 30 kg.

pros

• equipped with wheels;
• automatically remove condensate;
• equipped with night mode;
• maintains temperatures from 16 to 24 degrees.

Minuses

• loud noise when the compressor is turned off;
• high price.

Electrolux EACM-15CL/N3

Compact model for cooling and dehumidification, equipped with an air filter.

Controlled using a touch panel on the case and a remote control. Effectively copes with its task in rooms up to 38 square meters.

Weighs only 31 kg and has dimensions 44x72x36.9 cm.

During the cooling process, it operates at a power of 4.4 kW, providing an air flow of 5.83 cubic meters. m/min. In this case, the consumption does not exceed 1684 W.

Characteristics:

• serviced area - 38 sq.m;
• air flow - 5.83 cubic meters. m/min;
• power consumption - 1684 W;
• cooling power - 4400 W;
• dimensions - 44x72x36.9 cm;
• weight - 31 kg.

pros

• several modes;
• device self-diagnosis;
• evaporation of condensate;
• compact size.

Minuses

• makes a lot of noise;
• The exhaust hose gets hot.

Electrolux EACM-16HP/N3

Multi-mode model with R 410A refrigerant and filter.

Serves rooms up to 44 square meters.

Cooling with a power of 4.6 kW and heating of the room with a power of 3.9 kW are provided.

The device consumes 1.55 kW . Has a comfortable noise level of up to 52 dB. Weight 35 kg and dimensions 76.8x49x37.6 cm make the device easy to move.

Characteristics:

• serviced area - 44 sq.m;
• air flow - 9.33 cubic meters. m/min;
• power consumption - 1550 W;
• cooling power - 4690 W;
• heating power - 3900 W;
• dimensions - 44x72x36.9 cm;
• weight - 31 kg.

pros

• does not require installation;
• a light weight;
• high performance;
• several speeds.

Minuses

• loud work;
• Condensation drips when cooling.

Types and design of mobile air conditioners

By design, mobile climate control devices are of two types:

Mobile monoblock.

Mobile split system.

Mobile monoblock

The first type is similar to a window air conditioner, but there is a difference: the units in a mobile monoblock are located vertically, not horizontally. The ventilation mechanism and evaporator are located in the upper compartment, and the lower compartment is occupied by a condenser, compressor and fan that removes heat. The compartments are separated by a metal partition.

The upper section of the air conditioner has an air intake through which air enters from the room. Filtered and cooled air is returned to the room through openings equipped with louver guides.

In order to cool the condenser, air enters the lower part of the device from the rear side. There it is heated by a condenser and discharged outside through an air vent, which must be discharged either into a special hole or out a window. The corrugated air duct is similar to a vacuum cleaner hose, its diameter is 15 cm and its length is 1.5 m.

In a wide variety of monoblocks, there are models capable of processing only the internal atmosphere in the room, and models that supply the room with air from the street. In the second case, the air conditioner has two corrugated hoses: fresh air enters through one, and heated air is discharged outside through the second hose.

During operation of the mobile air conditioning system, condensation forms. It accumulates in a 4–5 liter container located at the bottom of the device. For normal operation of the compressor, it is necessary to periodically drain the accumulated liquid.

When a hose is routed through a crack in a slightly open window sash or balcony door for temporary installation, cooled air may leak. Therefore, this method is not the most convenient and uneconomical.

Some air conditioners come with an airlock, which allows hoses to be routed through the casement window without creating a gap. The airlock can be purchased separately. It is suitable for different versions of casement windows.

Application of an airlock for air removal:

“Gapless” laying of communications is suitable for permanent installation. Some monoblock models are equipped with special plugs that can be installed in the sliding window frame from below or from the side. The length of this additional part is adjustable to precisely fit the size of the window. The hose is inserted into the hole in the plug itself.

An alternative option for outputting communications is through a hole cut in the glass or punched in the wall. Fittings are installed in such holes to make it easier to remove the hose. After dismantling the climate control equipment, the “vents” are closed with plugs.

Mobile split system

This air conditioner consists of two blocks: internal and external. Unlike a conventional split air conditioner, the mobile system has a slightly different device: the compressor is located in the indoor unit. This unit, installed inside the room, contains the refrigeration unit, and the external unit, located outside the room, houses the condenser and fan.

For ease of transportation, both parts of the mobile device are equipped with small wheels. The blocks are connected using freon pipes and electrical wiring. All communications are protected by a single outer shell. The length of such a hose reaches 2–3 m.

If temporary installation of a mobile split system is required, the external element is placed in a utility room or secured outside the window. For fastening, screws are used that are screwed into the wall, or slings that are fixed to the heating radiator. For ease of installation on the facade of a building, some models are equipped with special brackets. Installation of such devices requires the help of industrial climbers.

Temporary installation of a split air conditioner involves laying communications through a window (fully open or through the gap between the sash and the frame). If the house has windows with wooden frames and glass on glazing beads, you can cut a groove in the lower part of the frame and pass a hose through it. In addition, there are special plugs that are inserted between the sliding window frames and allow communication between the two blocks. Then you can completely close the window without damaging communications.

The most difficult option: laying interblock hoses through a hole in the outer wall. The diameter of the hole should be about 8–12 cm. In this case, you will need to separate the blocks, which is only possible when installing self-sealing flanges on the indoor block. This complex procedure should be performed at a service center.

How to choose a mobile air conditioner?

Experts recommend considering the following parameters when choosing a mobile air conditioner:

• type - there are models without an air vent and with an air vent, which ventilate the room more effectively;
• operating modes - the air conditioner works only for cooling, or is equipped with additional options (heating, dehumidification, ventilation, automatic and night mode);
• power - varies from 1 kW to 7 kW;
• control - using a remote control, touch panel or wi-fi;
• mobility - the ease of moving the device depends on the weight and dimensions.

How to calculate the required power

When choosing a mobile air conditioner, consider:

• volume (area x ceiling height);
• room illumination;
• number of heat emitters (people, computers, televisions).

The amount is determined from 2 indicators: the product of volume and illumination coefficient and additional heat radiation. The illumination coefficient is 30-35-40 watts/square meter, which corresponds to the north-east (west)-south sides of the windows. Infrared radiation from a person, on average, is 125 watt/hour, a computer is 350 watt/hour, a TV is 700 watt/hour. Brochures indicate a BTU of 0.2931 watts.

Popular manufacturing companies

Buying equipment from a reliable brand is the key to its long service life.

The following brands have earned the trust of customers:

• Electrolux - produces compact models with high energy efficiency;
• Timberk is a Swedish company producing climate control equipment, which has a large selection of models at budget prices;
• Ballu - air conditioners from this company are characterized by an average noise level, the presence of several options and modes;
• Zanussi - air conditioners from this brand are distinguished by high power, due to which cooling the room takes a minimum of time.

Which brand of mobile air conditioners is better?

It is traditionally believed that the best air conditioners are Japanese. And it is true. But you shouldn’t look for “Japanese” among mobile air conditioners - such models are rare. Among floor-standing mobile air conditioners, the undoubted leader in our market is Electrolux. They supply us with the widest range of models, and Electrolux products rarely cause problems for owners. Electrolux air conditioners are equipped with a large number of different additional functions and modes.

See also: Types of glucometers

Other popular brands of mobile air conditioners:

• Zanussi;
• Aeronik;
• Royal Clima;
• Ballu;
• General Climate.