TOP 15 best miter saws with broaching: 2021 rating by price/quality and which inexpensive professional one to choose

Trimming long parts is almost impossible without a miter saw. For carpentry workshops, such a tool is indispensable, but it will also be a good help in home repairs and improvement.

How to choose the right device? To help in this matter, we have compiled a ranking of the best end caps for you.

The selection of models was carried out taking into account performance, reliability, and adequacy of the pricing policy.

Consumer reviews and expert opinions were taken into account.

Only the best models are presented here in terms of price/quality ratio.

Rating of the TOP 15 best miter saws with broaching 2020-2021

Place	Name	Price
TOP 5 best miter saws with broaching by price, quality and reliability for 2021
1	Metabo KGS 216 M	Find out the price
2	Metabo KGS 254 M	Find out the price
3	BOSCH GCM 800 SJ	Find out the price
4	BOSCH GCM 8 SJL	Find out the price
5	Metabo KGS 305 M	Find out the price
TOP 5 best inexpensive miter saws with broaching
1	BISON ZPT-255-1800 PL	Find out the price
2	BLACK+DECKER BES700-QS	Find out the price
3	CALIBER PTE-1900/255PRm	Find out the price
4	BISON ZPT-210-1600 PL	Find out the price
5	Einhel TC-SM 2131 Dual	Find out the price
TOP 5 best professional miter saws with broaching
1	BOSCH GCM 12 GDL	Find out the price
2	BOSCH GCM 8 SDE	Find out the price
3	Metabo KGS 315 Plus	Find out the price
4	Makita LS1219L	Find out the price
5	Metabo KGS 254 I Plus	Find out the price

The best budget miter saw for home BISON ZPT-210-1400 L

cost from 4500 rubles;
laser marker;
power 1.3 kW.

BISON ZPT-210-1400 L is a budget model, costing up to 5,000 rubles. At the same time, it has a power of 1300 W. Can make cuts at an angle of up to 45 degrees and an inclination of up to 47 degrees. The speed reaches 5500 per minute. For ease of use, a laser marker is provided that highlights the cut line, which increases the accuracy of the work. Lightweight - only 5.4 kg.

There is no soft start, so you need to work carefully - otherwise the tree may tear. It makes sense to use an aluminum blade with a fine tooth - productivity is slightly reduced, but the cuts are extremely accurate for any material: wood, laminate, plastic. The width and depth of the cut with a perpendicular cut are 60 and 120 mm, with an angle of 45 degrees – 35 and 85 mm. There is a dust collector, but it doesn't help much, but you can connect a vacuum cleaner.

The ZUBR ZPT-210-1400 L model is designed for home use. Due to its lightness and compactness, it can be used by construction crews for baseboards, parquet, when installing doors and other construction work.

Buyers note the low price, power, presence of a laser marker, compactness, light weight, reliability, and durability. Complaints about the lack of a smooth start and the laser eye becoming clogged with dust.

We advise you to study - Thread curtains in the interior - types, decoration ideas, examples of use in the kitchen, living room and bedroom

Pros:

cost 4500–5700 rubles;
reliability;
durability;
power 1300 W;
laser marker;
weight 5.4 kg;
small sizes.

How to choose a miter saw with broach?

When choosing a saw, you should pay attention to the following:

broach width - the larger it is, the wider the workpiece becomes “over the shoulder” of the device;
cutting depth – determines the thickness of the workpiece;
rotating design - in most models the angle ranges from 45 to 57 degrees, but there are options with larger angles, mostly professional ones;
quality of the sole - stamped ones become loose over time, it is better to give preference to cast ones;
emphasis - the higher it is, the easier it is to work;
The width of the groove for the disc - the quality of the work depends on this parameter. With a width of up to 1 cm, there will be fewer chips and sawdust on the cut.

TOP 5 best miter saws with broaching by price, quality and reliability for 2021

Metabo KGS 216 M

The classic miter saw is suitable for both beginners and amateurs, as well as for professional use..

High precision of work is ensured not only by the bright LED backlight and laser pointer, but also by the size of the cut, a large number of settings and ease of use.

The ergonomics of the tool are added to the design features, thanks to which all controls are in the operator’s field of vision.

The tool is equipped with retractable extensions, a collector for dust and shavings, and the ability to connect a vacuum cleaner for a cleaner workplace.

The disadvantages users point out are the tight angle rotation mechanism and the small volume of the included dust bag.

Specifications:

Design type: tabletop;
Cutting height/width: 65/305 mm;
Disc/bore diameter: 216/30 mm;
Tilt/rotate angle: 47/47 degrees;
Cutting speed: 57 m/s.

pros

laser marker;
backlight;
long warranty;
equipment;
build quality.

Minuses

noisy;
small bag for shavings.

Metabo KGS 254 M

Powerful tool designed for household construction and carpentry work.

Equipped with a sufficient number of functions, which brings the saw closer to the semi-professional category.

The strength and reliability of the design is achieved due to the aluminum body, high-quality assembly and components . Despite the fact that saws are produced in China, quality checks are carried out in accordance with European standards.

High operating speed is achieved by the number of revolutions and engine power.

The ergonomics of the device is guaranteed by a bright laser pointer, LED illumination of the working area and general design characteristics.

There is a spindle lock for safe maintenance. A powerful dust collector with the ability to connect a vacuum cleaner will help keep the workplace clean.

Specifications:

Design type: tabletop;
Cutting height/width: 92/305 mm;
Disc/bore diameter: 254/30 mm;
Tilt/rotate angle: 47/47 degrees;
Cutting speed: 60 m/s.

pros

laser pointer;
equipment;
power;
cutting depth adjustment.

Minuses

high price.

BOSCH GCM 800 SJ

One of the best saws in terms of price range and performance . Saw

household grade has wide functionality and can be used even in small carpentry workshops.

The advantage of the model is the design - the drive is equipped with double electrical insulation, allowing operation in rooms and conditions with high humidity.

Saw blades can be easily changed without much time.

The saw copes well with both hard and tough wood at different angles.

It is also equipped with a dust removal system, but users note its imperfection - dust and chips fly past and pollute the workspace.

Specifications:

Design type: tabletop;
Cutting height/width: 70/270 mm;
Disc/bore diameter: 216/30 mm;
Tilt/rotate angle: 45/47 degrees;
Cutting speed: 57 m/s.

pros

double electrical insulation;
performance.

Minuses

poor equipment;
imperfect removal of work debris.

BOSCH GCM 8 SJL

Semi-professional tools from a well-known German manufacturer are designed for processing parts with a small cross-section.

The saw is capable of working not only with wood, but also with metal and a variety of plastics.

The small diameter of the saw blade does not interfere with the speed and functionality of the tool.

Additional options that provide ease of use include a cutting depth limiter, work table extenders and a two-point dust removal system, which allows you to keep the work area clean and not be distracted by sweeping away chips and dust.

Specifications:

Design type: tabletop;
Cutting height/width: 70/312 mm;
Disc/bore diameter: 216/30 mm;
Tilt/rotate angle: 47/60 degrees;
Cutting speed: 62 m/s.

pros

laser marker;
groove cutting depth limiter;
two-point removal of chips and dust;
clamp for fixing the workpiece.

Minuses

meager equipment.

Metabo KGS 305 M

A universal miter saw has high power and speed of operation, as well as a wide range of different functions, due to which it is classified as a semi-professional tool.

The wear-resistant saw blade does not require sharpening for a long time and is capable of working with various types of wood, plastic, and metal.

It can work both in stationary and manual mode, which sets the saw apart from other options.

Non-standard workpieces can be fixed using special clamps, and stability is increased by special side stops.

Ergonomics are represented by a bright laser marker, LED illumination of the working area, and a soft start system. The built-in dust collector is designed to accommodate a large volume of debris, and when a vacuum cleaner is connected, the ingress of debris onto the work surface is virtually eliminated.

Specifications:

Design type: tabletop;
Cutting height/width: 105/305 mm;
Disc/bore diameter: 305/30 mm;
Tilt/rotate angle: 47/47 degrees;
Cutting speed: 60 m/s.

pros

smooth start;
backlight and laser pointer;
side stops and clamps;
stop for transverse and longitudinal grooves.

Minuses

high noise level.

Mid-range miter saws

BOSCH PCM 8

This product is an excellent choice for those who prefer to work at home. All cuts are high quality, accurate and efficient, regardless of the material used. The saw is capable of cutting even soft metals such as aluminum or copper. The workpiece is fixed using the original clamp. The laser greatly improves cutting accuracy. The tool has a carefully designed dust removal system to keep your work area clean. The power of the engine installed here is 1200 W, its maximum speed is 4700 per minute. The maximum cutting height is 70 mm. The diameter of the saw blade is standard - 210 mm with a mounting hole size of 30 mm. The overall dimensions of the entire structure are 770x410x570 with a weight of 20.5 kg, so moving the product from one place to another is not very easy.

More: Top 10 best radish varieties

The work area is illuminated with LED flashlights. It is worth noting that such a device can be used without grounding, since the device is equipped with a double insulation system. The handle is rubberized, the palm does not slip off it. The head will not lower by itself - the safety button will prevent it. If desired, the product can also be used to make grooves. Manufacturers have installed a spindle locking system, so you can replace the disc within seconds, and there is also a very effective cutting scale.

Advantages:

Not too expensive products;
High quality manufacturing and assembly;
Carefully thought out security system;
Availability of LED illumination of the working area and laser guide;
Precise angles can be adjusted almost instantly.

Flaws:

Quite a bulky product.

BOSCH PCM 8

Kraton MS-1900/254

The product has an electric motor with a power of 1900 W - this is one of the highest indicators in our entire review, the number of revolutions is 4800 per minute. The device operates efficiently and reliably, and practically does not break down. It is allowed to use not only wood as a working material, but also plastic, laminate, aluminum profile and other similar materials. The saw has small overall dimensions, so it is easy to move from one place to another. The main structural elements are made from high-quality alloys of low mass - the weight of the entire device is not very large. The saw is equipped with double guides that allow you to move the saw blade, in turn, this design solution allows you to work with wide workpieces - up to 310 mm.

The product is equipped with a spindle locking system, so the disc can be changed quickly if necessary. Dust is removed efficiently, since the saw has a special suction pipe, which can be connected to a dust collection bag or connected to a vacuum cleaner. The dimensions of the saw blade here are standard, and the tilt angles are also 45 degrees in each direction. The guide is located on linear ball bearings. Table extensions can be removed when not required. The cutting line is indicated by a laser pointer. The workpiece can be additionally secured in a special clamp.

Advantages:

There is a disk immersion limiter, which allows you to make a cut to the required depth;
There is a soft start system;
High cutting accuracy;
Excellent reliability;
There is a broach that increases the cutting width to 310 mm;
No backlash was noticed during testing.

Flaws:

There is no protective cover.

Kraton MS-1900/254

Miter saw Metabo KGS 216 M

The tool is great for working with a wide variety of materials - wood, plastic, various decor intended for interior decoration. It belongs to the professional class, so it can be used not only at home, but also in the workshop. The product is equipped with a reliable electric motor, which has a high-quality protection system against overheating and overload, so the unit can be used in intensive mode. The product has a rubberized handle, overall dimensions and weight are insignificant. The design includes a broach that allows you to increase the cutting width to 305 mm. There is a cutting depth limiter. There are scales on the frame so that you can accurately set the angle.

The table is made of cast aluminum alloy, which resists even strong impacts. This greatly extends its service life. LED lighting is provided. The functionality is expanded, so the length of the table can be increased even without the use of special tools. The engine power is 1500 W; it provides a rotation speed of up to 5000 rpm per minute. On the body you can find side handles for comfortable carrying of the tool, a spindle lock is provided, and there are hooks for winding up the power cable. When folded, the saw is secured with a special lock.

Advantages:

Excellent reliability;
High revs with not the most powerful engine;
Very convenient to work;
Professional tool;
Rubberized handle;
Relatively small mass;
Can be easily transported from place to place;
Long power cable.

Flaws:

There is no soft start system.

Review METABO KGS 216 M / IDEAL MITER SAW FOR THE WORKSHOP AND HOME

Miter saw Metabo KGS 216 M

TOP 5 best inexpensive miter saws with broaching

BISON ZPT-255-1800 PL

A Russian-made miter saw that allows you to work not only with wood, but also with aluminum and plastic.

It has the functions of a circular saw and allows you to cut workpieces to length, for which it is equipped with a special work table located at a different level compared to the miter table.

The broach allows you to trim various workpieces with a width of more than 30 cm.

The speed of operation is achieved by power and a large number of revolutions.

The dust removal function is present, however, during operations, chips fly onto the guides; they must be removed regularly, which slows down the work.

Specifications:

Design type: tabletop;
Cutting height/width: 90/305 mm;
Disc/bore diameter: 255/30 mm;
Tilt/rotate angle: 45/47 degrees;
Cutting speed: 55 m/s.

pros

laser pointer;
extension of the table in both directions;
power;
functions of a circular saw.

Minuses

during operation, chips fly onto the guides;
weak light from the laser pointer.

BLACK+DECKER BES700-QS

Classic table saw for household use . A special feature of the model is

the absence of a laser marker and the location of the backlight - it is such that it sets the cutting direction with the shadow of the disk itself.

This is partly a plus and a minus - the laser guide can go astray, while the natural shadow cannot be knocked down.

All modern functions are present - tilt angles, adjustment of cutting depth.

All supporting elements are made of cast parts, which ensures high reliability of the device.

Specifications:

Design type: tabletop;
Cutting height: 62 mm;
Disc diameter: 216 mm;
Tilt angle: 45 degrees;
Cutting speed: 50 m/s.

pros

the direction of the cut is set by the shadow;
functionality;
The disk is easy to replace.

Minuses

no laser marker.

CALIBER PTE-1900/255PRm

An excellent tool for carpentry work . Equipped with a powerful commutator motor,

providing high rotation speed.

A laser marker and fold limiter increase the accuracy of work with workpieces.

A special feature of the model is that the saw can even work with firewood . The rich set of accessories is a pleasant bonus - the saw comes with a set of brushes, a clamp, and a dust bag.

The maximum cut here is small, but sufficient for most jobs . It will be an excellent help both for household needs and for a small carpentry workshop.

Specifications:

Design type: tabletop;
Cutting height/width: 72/300 mm;
Disc/bore diameter: 255/30 mm;
Tilt/rotate angle: 45/45 degrees;
Cutting speed: 55 m/s.

pros

laser marker;
equipment;
powerful engine;
assembly reliability.

Minuses

no soft start.

BISON ZPT-210-1600 PL

Compact, single-speed tool for handling workpieces of various sizes.

Equipped with a table for fixing the device, the cutting head can easily be tilted to the right and left if necessary.

The sharp disc copes well with workpieces up to 60 mm thick.

The laser line will allow you to accurately guide the cutting elements.

Power parameters and cutting elements allow you to work not only with wood, but also with thin-walled metal and plastic materials.

The output does not chip and is easy to install and transport. Compared to most models, it has a fairly low noise level.

Specifications:

Design type: tabletop;
Cutting height/width: 70/220 mm;
Disc/bore diameter: 210/30 mm;
Tilt/rotate angle: 45/45 degrees;
Cutting speed: 60 m/s.

pros

laser marker;
ease of installation and transportation;
power;
cut quality.

Minuses

Slowly removes dust and sawdust.

Einhel TC-SM 2131 Dual

A compact and fairly lightweight miter saw is ideal for cutting fence boards, timber, and working with facing materials.

Optimal for rough work without perfectly precise dimensions. Equipped with a good motor that produces high torque speed.

Accuracy is ensured by a laser marker, but during operation it can become clogged with dust, which is why it needs to be wiped from time to time.

The dust collector included in the kit copes well with large debris, but fine dust easily scatters, contaminating the work surface; for cleanliness, it is recommended to connect a vacuum cleaner.

Specifications:

Design type: tabletop;
Cutting height/width: 62/310 mm;
Disc/bore diameter: 210/30 mm;
Tilt/rotate angle: 45/45 degrees;
Cutting speed: 60 m/s.

pros

laser marker;
easy to configure and install;
optimal height and width of cut;
easy to maintain.

Minuses

the laser marker becomes clogged with dust;
Suitable for rough work.

Rating of miter saws without broaching

It is not always the case that carpentry shops process such large parts that the miter saw head will need to be pulled through, and this mechanism significantly increases the overall cost of the device. The difference in price can be from one hundred to two hundred percent, but there are no differences in working with small parts. An important advantage when choosing may be the compactness of the device - it simply requires less space for installation, plus it weighs ten to one and a half kilograms less than analogues with a broach.

If these considerations are important, then the rating of models without a broaching mechanism will help you decide which miter saw is better.


	Dewalt DW 713	Makita LS 1040 F	Metabo KS 216 M Lasercut


Disc mounting diameter, mm	30	30	30
Disc diameter, mm	250	260	216
Power, W	1600	1650	1100
Ability of the saw to tilt left/right	48 / 3	45 / —	47 / 2
Table adjustment left/right, degrees	50 / 50	45 / 45	47 / 47
Max cutting depth at an angle of 45°, mm	89	67	45
Max cutting depth at an angle of 90°, mm	89	93	60
Max cutting width at an angle of 90°, mm	162	95	120
Max cutting width at an angle of 45°, mm	114	93	80
Speed adjustment
Speed, rpm	5000	4600	5000
Adjusting the cutting depth
Backlight
Laser
Smooth start
System for maintaining constant speed under load
Weight, kg	13.6	11	9.4

Dewalt DW 713

+ Pros of Dewalt DW 713

high-quality components and assembly;
fine tuning out of the box;
high ergonomics and overall reliability of the device;
convenient design of clamps that set the angles of cuts;
the angle scale is stamped on an adjustable plate - if adjustments need to be made, this is done by unscrewing one mounting bolt;
small amount of dust, provided you connect a good vacuum cleaner;
large work surface;
ready-made grooves for frequently used corners.
The engine power allows you to work with various materials: wood, plastic, aluminum, polyurethane.

— Cons of Dewalt DW 713

there is no smooth start - when starting, the handle pulls up a little;
difficulty finding components;
The disadvantage of not this particular model, but of all Dewalt products is the small number of service centers.

Results . The landing diameter of the disk is 30 mm, the total diameter is 250 mm. Maximum engine power is 1.6 kW, without speed control. There is no laser pointer or backlight. User opinions characterize the DW 713 as a reliable workhorse that will produce good results regardless of external conditions. A good choice for domestic and professional use when processing small-sized workpieces.

Makita LS 1040 F

+ Pros of Makita LS 1040 F

rigid design guaranteeing precision cuts;
components well matched to each other;
thanks to the presence of a soft start, the saw remains stable when starting and braking;
the weight of the device is well chosen - it is enough for the saw to be stable, but not cause discomfort when carried to another place;
if it is necessary to replace the brushes, a quick access system is provided;
low noise level.

— Cons of Makita LS 1040 F

the starting and braking mechanisms are not always worked out correctly - for treatment it is necessary to go through all the electrical equipment;
frequent complaints about the backlight fuse blowing, and in rare cases the lamps themselves;

Results . The tool is designed to work with wood, plastic, aluminum and laminate. Designed for discs with a bore diameter of 30 mm and a total diameter of 260 mm. Maximum engine power is 1.65 kW, without speed control. There is illumination of the working area, but there is no laser pointer. A reliable miter saw, but with the potential for occasional electronic glitches. If you are not afraid to get into the control unit to replace a fuse or correct contacts, then the price-quality ratio, compared to analogues from competitors, is in favor of this model.

TOP 5 best professional miter saws with broaching

BOSCH GCM 12 GDL

Stationary saw with high power and torque speed . Has high

productivity, easily copes with large volumes of sawing work.

Capable of processing any type of wood, metal, and plastic without much effort.

Reliable fixation of workpieces is ensured by thrust profiles and a clamp . Long workpieces will allow you to process telescopic supports.

Adjusting and setting up the saw is very simple thanks to clear controls and accessible instructions..

Wide functionality allows you to use the saw not only in domestic conditions, but also in small workshops.

Specifications:

Design type: tabletop;
Cutting height/width: 104/341 mm;
Disc/bore diameter: 305/30 mm;
Tilt/rotate angle: 47/60 degrees;
Cutting speed: 60 m/s.

pros

clean cut;
power;
reasonable cost;
telescopic supports for long workpieces.

Minuses

meager equipment.

BOSCH GCM 8 SDE

Professional tool for longitudinal and cross cutting of wood blanks.

A powerful engine and high-quality sharpening of the saw blade allow you to process any type of wood.

The saw blade tilts easily, there are precise protractors for setting the angle.

The lower saw guard is automatically removed, providing greater operator safety.

Sawdust is collected using a plug-in vacuum cleaner . Ergonomics are ensured by a comfortable pistol-shaped handle; the trigger button is wide and can be pressed with several fingers at once.

Specifications:

Design type: tabletop;
Cutting height/width: 70/312 mm;
Disc/bore diameter: 216/30 mm;
Tilt/rotate angle: 60/47 degrees;
Cutting speed: 55 m/s.

pros

laser pointer;
equipment;
power;
cutting depth adjustment.

Minuses

poor equipment;
no dust collector.

Metabo KGS 315 Plus

One of the best miter saws with broaching . Design features allow smooth

adjust the number of revolutions, and in combination with a sharp cutting element and high power, the tool can process various materials, including metal.

Much attention has been paid to the quality of the dust collector - a two-point vacuum system guarantees a minimum amount of dust and shavings in the workplace.

By connecting two vacuum cleaners, debris during cutting is virtually eliminated.

It is not suitable for professional use due to the low accuracy of scale markings.

Specifications:

Design type: tabletop;
Cutting height/width: 120/320 mm;
Disc/bore diameter: 315/30 mm;
Tilt/rotate angle: 47/60 degrees;
Cutting speed: 67 m/s.

pros

laser marker;
smooth speed control;
performance.

Minuses

low accuracy of scale markings.

Makita LS1219L

A high-power table saw is a semi-professional tool.

The peculiarity of the model is the ability to set the side of the laser marker - it can go either on the right or on the left side of the disk.

The broach is implemented in such a way that the guides are pushed forward, so that nothing moves back, which allows you to place it almost flush against the wall.

There are table extenders that allow you to work with non-standard workpieces.

Rotation can be carried out both with and without angle fixation . It is possible to fix the saw for transportation.

Specifications:

Design type: tabletop;
Cutting height/width: 107/363 mm;
Disc/bore diameter: 305/25.4 mm;
Tilt/rotate angle: 48/60 degrees;
Cutting speed: 69 m/s.

pros

laser pointer on both sides of the disk;
broach fixation;
power;
smooth start.

Minuses

non-standard diameter of the mounting hole;
price.

Metabo KGS 254 I Plus

One of the best and newest models of miter saws . The main advantage is asynchronous

drive, powerful motor and improved ergonomics.

The first allows you to convert electrical energy into mechanical energy, due to which a low noise level is achieved during operation, and the mechanism itself lasts much longer.

Equipped with a cutting depth adjustment, a bright laser pointer and a precise scale.

The cleanliness of the workplace will be ensured by a dust collector with a two-point intake, thanks to which the spread of dust outside the working area and its direct contamination will be minimized.

Durable stops will not allow you to move even under heavy loads and when working with hard wood.

Specifications:

Construction type: manual;
Cutting height/width: 90/305 mm;
Disc/bore diameter: 254/30 mm;
Tilt/rotate angle: 46/47 degrees;
Cutting speed: 62 m/s.

pros

accurate scale;
ergonomics;
engine power;
strong stops.

Minuses

heavy.

Premium miter saws

Evolution RAGE3-S

It is small in size, which greatly facilitates the transportation and storage of this equipment. When using the tool, you will not have to change the disk if there is a need to cut a material of a different nature, which greatly saves time and increases labor productivity. Using a laser pointer, you will always be able to see the start and end of the cut, regardless of the angle of inclination of the blade. If necessary, the user can install a diamond-coated blade and cut ceramic tiles and even concrete products. The control handle has well-thought-out ergonomics - your palms and wrists do not get tired even with prolonged use of the tool. The device can successfully work with wood, aluminum and even steel. It is manufactured using patented RAGE technology, which provides reliable protection against overfeeding.

More: Top 10 best motorized winches [yearcode]

The saw is equipped with a high-quality, high-strength gearbox, which ensures low engine speeds and increased torque. The workpiece can be secured from above or from the side; the saw has a broach. Illumination of the working area is provided. If nails, screws or staples get under the saw blade, nothing will happen to it. All work is carried out without sparks, the cutting line is very clean, and there is a protective casing.

Advantages:

Increased strength of the gearbox, allowing it to withstand both heavy loads and vibration that occurs when sawing steel;
Reasonable price for a professional tool;
Carefully thought out security system.

Flaws:

Needs grounding.

Evolution RAGE3-S

Metabo KGS 315 Plus

One of the most powerful units in our entire review of the best miter saws. It is intended for sawing workpieces made of wood, plastic and various non-ferrous metals. It is strictly prohibited to use it for cutting ferrous metal. The tool is multifunctional, has small overall dimensions, so it can be used even in a home workshop. The motor power is 2200 W, which allows you to work even with hard wood. The working platform is carefully polished at the factory, so the material will easily slide both along the table and across it. The side shelves have a sliding mechanism, so you can work even with wide workpieces. The spindle is locked at the touch of a button. When the saw blade block is raised to the non-working position, it is covered with a protective cover. The saw deviates in both directions from the vertical.

The desktop is quite wide - its dimensions are 1070x505x365 mm; due to the adjustment lever, it can be rotated to the right by 47 degrees and to the left by 60 degrees. The gearbox is equipped with a belt drive, the number of disk revolutions can be adjusted - from 3100 to 4100 per minute, and there is a laser cutting line indicator. There is a smooth engine start system that reduces vibrations during startup, as well as a system for maintaining the number of revolutions regardless of the applied load.

Advantages:

Quite a strong and reliable car;
A soft start system is provided;
Small overall dimensions;
There is an adjustment of the number of revolutions;
High build quality.

Flaws:

Quite expensive;
You won't be able to cut ferrous metal with it.

Metabo KGS 315 Plus

Makita LH1040F

Finally, we can introduce you to the leader of this part of our rating - this is a special combined miter saw from a world-famous manufacturer. It can be used both for its intended purpose and as a sawing machine. The tool can work with wood, soft metals and other similar materials. The diameter of the saw blade is slightly smaller than the standard one - 260 mm, the opening for installation is ordinary - 30 m. The rotating mechanism allows you to tilt it 45 degrees in each direction from the vertical. The saw can process workpieces whose thickness does not exceed 40 mm. A U-shaped extension is included in the kit. To prevent the disk from jamming during operation, the design is equipped with an original riving knife.

The device is equipped with an electric motor whose power is 1650 W. It starts up every time as smoothly as possible, largely thanks to the inrush current limiting system. The unit is carefully protected from all kinds of overloads by double insulation, so it can be used even without grounding. There is a braking system that stops the disk almost immediately after turning off the power. The maximum number of tool revolutions is 4800 per minute. Using original technology, you can even perform a rotary cut.

Advantages:

Quite powerful products that can work with a wide variety of materials;
All design control elements are conveniently located;
No backlash was found, including when setting the required cutting angle.

Flaws:

The illumination of the work area is somewhat weak;
High price.

Makita LH1040F

Saw with broach - what is it and the principle of operation

A miter saw with a broach is useful when working with lining and when laying out skirting boards and baguettes, as well as when carving narrow boards, slats, and bars.

The base includes handles with a switch and a working circle with an electric motor, mounted on the base.

A functional module is mounted on parallel slats, ensuring free movement of the saw blade directly during operation.

Thanks to the broaching mechanism, it is possible to work even with the widest boards in one go, without wasting extra time.

Which company should you choose?

The list of leaders includes:

Zubr is a Russian manufacturer of power tools in the budget segment. There are both simple household saws and professional models for complex processing.
Metabo - a German manufacturer supplies semi-professional and professional devices with high build quality, sharp discs, and engine power. The main disadvantage is the fairly high cost.
Makita is a Japanese brand that supplies high-quality and reliable devices with branded components. Many of them are equipped with comfortable tables and a well-thought-out pulling mechanism.
Caliber is another Russian manufacturer whose miter saws are distinguished by large saw blades, structural strength and reliable fixation of workpieces. The tool can work with materials of varying hardness, including not only different types of wood, but also metal and plastics.

Metabo KGS 315 Plus

Metabo KGS 315 Plus photo

Price from 60,000 rub.

The first place on the list goes to the high-performance model from Metabo. An extremely powerful device designed for trimming and trimming large metal and wooden workpieces. The engine of the design develops a power of 2.2 kW at a rotation speed of 4100 rpm; this figure is sufficient for a home workshop and professional use at a construction site.

Advantages:

assembly;
good set;
works on wood, metals;
productive motor.

Flaws:

high price.