How to adjust the temperature of a Samsung refrigerator

The refrigerator is an important element in the life of a modern person. This is equipment that manufacturers are trying to make especially high-quality and reliable, because people’s health depends on the safety of products. However, often much earlier than users expected, the refrigerator breaks down. The most common reason is failure to maintain the correct temperature. If you want to learn how to avoid breakdowns and correctly adjust the temperature in the Samsung Now Frost refrigerator and similar models, then this article will help you.

A variety of household appliances to store your products

The functionality and design of Samsung models is diverse. And each model requires individual configuration. Models of a popular brand of household appliances for storing food are divided into:

Two-chamber. The freezer compartment is located at the top, and the refrigerator compartment is located below. This type has been in production longer than all other models.

Combined. Combi class models are equipped with two autonomous chambers with separate cooling, while a large freezer compartment is located at the bottom, unlike the previous type.

Side-by-side. Separate chambers are equipped with their own doors. And the appearance of the household appliance resembles an impressive cabinet.

Do you need a freezer?

Refrigerators are used for a variety of purposes. Therefore, Samsung has released several variants of refrigerators:

with freezer;

without freezer compartment;

freezer compartment only.

Based on the type of cooling mechanism, there are two types:

Absorption refrigeration systems are quiet and lighter in weight compared to compressor systems. Their performance is much lower than that of compressor refrigerators and, simply put, they produce less cold. Their internal temperature depends on the ambient temperature due to the mechanism of temperature transfer from liquefied ammonia. Since the system uses ammonia circulating under pressure, its leakage is extremely dangerous for humans and can damage the mucous membrane and respiratory tract. If you find problems with absorption models, you should immediately contact the service center. The procedure for repairing such household appliances is carried out only in the factory by professionals equipped with special protection.

Compressor-type refrigerators are heavier, noisier, but more reliable and safe. The frenon used in the system can be found anywhere in the world and, therefore, repairing such a refrigerator will not be difficult. Problems with such models can often be fixed at home with your own hands or by calling a technician to your home, but it is extremely rare to take them to a workshop.

Absorption refrigeration chambers appeared due to the pursuit of greater manufacturability, so at first glance the danger of use is justified, but it is worth considering them and paying attention to the cost-effectiveness of use.

What types of sensors are there?

In order to maintain the optimal temperature in each of the refrigerator compartments, manufacturers installed a control panel in each instance. The information that the sensor sends to the control panel will affect the temperature of each of the chambers. Sensors can analyze:

Operation of the entire refrigerator;

Condition of the freezer compartment;

The common sensor for the entire refrigerator is located in the center of the refrigerator compartment. Its indicators characterize the average temperature regime. Most modern models are based on the 502AT model. The failure of this element can lead to breakdown of all the mechanisms of the refrigerator, and then a complete stop of the operation of the equipment. Therefore, it is necessary to replace it immediately. It is not recommended to change sensors yourself, since replacement requires certain skills and knowledge. We advise you to contact a service center, where professionals will do everything reliably and efficiently.

How to properly configure the control panel?

The user manual included with each model must be read before changing the settings of the household appliance. Error information can be monitored on the control panel display. If the refrigerator and freezer compartments are combined, adjustment must be made as follows:

A glass of water is placed in the central part. This way we will measure the exact cooling temperature.

If the final temperature is +4, then everything is fine.

In case of increased temperature by 1-2 degrees, it is necessary to adjust the Cooling Power button, Fridge or thermostat knob.

If the button is missing, then the thermostat knob with seven divisions will help. Turn it to the required temperature.

There is no point in setting the minimum temperature, as this will entail high energy costs and constant overload of the compressor.

Setting the temperature in Samsung refrigerators

Each model of refrigerator or freezer is equipped with instructions indicating the procedure necessary for the normal operation of the entire unit. The control panel has a display informing about the mode and possible problems. Adjustment of combi-type refrigerators, when the common and freezer compartments are in the same cabinet, is carried out as follows:

The exact cooling temperature is determined. To do this, use a glass of water placed at the central level of the refrigerator. +4 indicates normal operation. An increase in one direction or the other indicates the need for intervention;

The control panel has a display informing about the mode and possible problems. The temperature can be set using the Cooling Power or Fridge button, if the model is equipped with them. Or a thermostat, in the form of a rotating knob.

The standard adjustment range for the refrigerator compartment is from +1 to +7 degrees.

The freezer temperature in two-chamber refrigerators has separate settings, but the adjustment range is much wider.

With the fast freeze function, the freezer reduces the temperature to a minimum for 72 hours. At the end of this mode, it returns to normal operation.

Is the flashing light an error or a problem?

Most Samsung models are equipped with an indicator that indicates problems. Often, after a purchase, the indicator behaves in a way that is inexplicable to the user. After all, usually the light is on or off constantly, and then starts blinking in pairs. The most common reasons for strange indicator and display behavior:

Frequent opening of the door leads to an increase in the temperature inside and the sensors signal this.

The temperature mode is not set. If after purchase the refrigerator is turned on and left alone without doing anything, the system will react to negligence and remind the buyer of its responsibilities.

Ice tray. Often a separate light for the freezer will indicate that the tray is not in the correct position. You need to change your position and everything will return to normal.

When you move the door, some indicators begin to flicker. It is necessary to check all contacts and normalize the tightness.

If you have tried all of the above and nothing helped, you need to contact the service center.

Samsung refrigerators are in high demand due to their low noise operation, economical energy consumption and optimal temperature in the chambers. The manufacturer has left the opportunity to independently regulate the mode within limited limits, following the instructions for setting the temperature in the Samsung refrigerator. How to set the temperature in the refrigerator can be found in the video.

Common problems and ways to solve them

Let's look at the most typical difficulties that arise during the operation of refrigeration units:

rising temperature in the compartments due to the constant opening of the front doors. Keep the device closed for 2-3 hours - the “climate” inside will normalize;
degrees also increase due to exposure to sunlight - the equipment works optimally in a shaded place or when covered with thermal screens;
indicator malfunction caused by reinstallation of door hinges and “crooked” wiring contact. Disconnect the plugs and correctly communicate the cables responsible for supplying signals to the digital display;
incorrectly set number of degrees - follow Samsung’s advice;
Once you have set the temperature, do not place hot culinary products in the Samsung refrigerator, and also avoid opening the doors for a long time. The system reminds you of operational violations by flashing the control indicator. Disconnect the device from the network for 10 minutes - when you restart, the flickering of the display will disappear.

How to clean your Samsung air conditioner yourself

How to set the temperature in a Samsung refrigerator with a drip defrosting system

Depending on the model and type, the temperature in the cabinet and freezer is different. If you change the temperature in the freezer, the parameters in the cabinet also change. The adjustment is carried out using buttons, which are adjusted according to the readings of temperature sensors located:

in the refrigerator compartment;
inside the evaporator;
in the freezer;
on the body, outside the sealed space.

The task of the sensors is to transfer the measured parameters to the electronic control system of the Samsung refrigerator. Temperature control is carried out on the display. In each case, when setting up a specific model, you need to follow the instructions for setting the temperature of the refrigerator.

Before changing the temperature, you must allow time for the thermostat to accept the ambient parameters. After this, turn on the Samsung refrigerator and let it work to ensure the parameters set in the factory settings. You can check the correspondence of the electronic display readings using a glass of water placed in the center of the refrigerator and a thermometer. It is normal if the water shows +4 degrees. Samsung sets the set temperature in a cold cabinet to +1 - +5 0 C, in the freezer the control range is wider than in the refrigerator, from -13 to 20 0 C.

How to set the temperature on a two-chamber Samsung refrigerator

Before changing the temperature, you must allow time for the thermostat to accept the ambient parameters. After this, turn on the Samsung refrigerator and let it work to ensure the parameters set in the factory settings. You can check the correspondence of the electronic display readings using a glass of water placed in the center of the refrigerator and a thermometer.

How to correctly set the temperature in a Samsung No Frost refrigerator

Unlike drip defrosting systems, the dry sublimation system changes the temperature balance in both chambers. The evaporator is placed in the rear wall, creating continuous ventilation of the chambers. You can set the temperature of No Frost two-chamber Samsung refrigerators in the same way as with drip defrosting, using electronic control or manual control.

It is difficult for a modern person to live without a refrigerator. But quite often it happens that a recently purchased and seemingly quite high-quality unit, which should serve for at least several years, fails after a couple of months. One of the most common reasons is incorrect temperature conditions.

Check Also

What you need to know about TV screen resolution? The resolution of the TV screen plays an important role in image quality. This parameter will have its effect regardless of the type of matrix and the diagonal of the technical device.

Samsung refrigerators have earned trust among consumers due to their reliability, noiselessness and efficiency. Particular attention is drawn to the temperature indicators of devices. Manufacturers independently determine what temperature should be in a Samsung refrigerator. This is due to repeated research and testing.

However, every refrigerator and freezer has controls that allow you to regulate the cold within reasonable limits. Below are instructions on how to set the temperature in a Samsung two-chamber and No Frost refrigerator.

Depending on the model and type, the temperature conditions of refrigerator chambers vary noticeably and decrease from top to bottom. The main cabinet chamber is set to 3. This indicator varies up to 2 degrees.

Interesting: Samsung technologies have made it possible to achieve a result where the temperature in one chamber does not differ by more than 0.3 degrees, regardless of its volume.

The adjustment is made from the control panel, which is connected to sensors located inside the unit.

The purpose of a temperature sensor is to record the temperature in a specific area of the refrigerator. By transmitting the received information to the control circuit, it determines the operating mode of the compressor, changing its intensity.

You can set the required temperature in each refrigerator compartment.

The following sensors are responsible for the temperature regime in Samsung refrigerators:

Refrigerator compartment (shared);
Inside the evaporator;
Freezer;
Environment (located on the control panel).

The outputs of all sensors come to an electronic control circuit, which issues commands to maintain a given mode. The basis is the average temperature in the central area of the refrigerator, therefore, the main sensor is located in this area.

The exact cooling temperature is determined. To do this, use a glass of water placed at the central level of the refrigerator. 4 indicates normal operation. An increase in one direction or the other indicates the need for intervention;

The standard range of adjustments for the refrigerator compartment is from 1 to 7 degrees.

The freezer temperature in two-chamber refrigerators has separate settings, but the adjustment range is much wider.

With the fast freeze function, the freezer reduces the temperature to a minimum for 72 hours. At the end of this mode, it returns to normal operation.

This feature greatly simplifies the use of the refrigerator. It frees the owner from the need to forcibly defrost the device, saves time, extends the service life and allows for better preservation of food. The mode is ensured by forced air circulation. An additional fan is provided for this purpose.

The temperature increased by more than 3 degrees. The reason is the door being opened frequently at high ambient temperatures. To eliminate it, you need to close the door and let the refrigerator enter normal mode (2-3 hours);

Temperature not set. Carry out installation according to the instructions;

The ice tray (separate indicator) is not installed correctly. Check and place correctly;

There is a fault in the electronic panel contacts. Occurs when doors are rearranged. Check connections.

Incorrectly set temperature in the refrigerator leads to the formation of a crust of ice. In addition to inconvenience, this is accompanied by increased energy consumption. Abnormal operation is indicated by water leaking into the pan.

These factors cause rapid deterioration of stored products, which manifests itself not only in rotting, but also in drying out. Therefore, at the slightest suspicion of a problem, you should refer to the attached instructions.

In the modern world, more and more new generation models are being produced on the household appliances market. The Samsung No Frost refrigerator is one of them. The operating principle used in it allows you to forget about regular defrosting. To use this equipment correctly, you should study the manufacturer’s instructions, as well as the types of malfunctions encountered and their causes.

Quite common among refrigerator production technologies is Samsung No Frost. It is also called wind-type defrosting.

Any Samsung No Frost refrigerator is equipped with an evaporator, which is located from the cold generation chamber into the rear wall housing.

An additional fan is included. According to the operating instructions, the Samsung No Frost refrigerator implies continuous circulation of cold air in the chambers.

We invite you to familiarize yourself with the consequences of bedbug bites - from harmless to the most severe

The cooled masses enter the chambers. For this purpose, special channels are provided, which are contained in the Samsung No Frost refrigerator. The device instructions indicate that moisture does not settle on the walls. It accumulates in the form of frost in the coldest area, which is the evaporator.

Both the freezer and refrigerator compartments have the No Frost system. The presented technology will allow cleaning the inside of the refrigerator compartments only once a year. This saves users a lot of time.

The presented technology is characterized by positive qualities that are fully expressed in household appliances such as Samsung No Frost refrigerators. The models presented by the manufacturer fully possess these positive qualities. These include:

uniform temperature distribution;
quickly recreate the required storage conditions when loading a large number of products or frequently opening the door.

The second point is ensured by the presence of a powerful compressor, as well as high-quality thermal insulation, which are provided in models of Samsung No Frost refrigerators.

There are also several disadvantages to the presented technology.

The internal environment is drier than in conventional drip units. Opened food dries out quickly.
Built-in equipment takes up part of the chamber volume.
High noise level.
Increased energy costs.
The Samsung No Frost refrigerator is more expensive than the drip version, which is due to the complex design of the models.

To prevent food from drying out, it is necessary to ensure proper storage. Appropriate packaging solves this problem.

Without periodic defrosting, Samsung No Frost refrigerators simply would not be able to function.

In order to facilitate the process of caring for this type of equipment, the manufacturer has provided an automatic process. To understand how to defrost a Samsung No Frost refrigerator, you should familiarize yourself with the sequence of the standard procedure for this action.

After 10-14 hours, special elements of household appliances defrost the accumulated frost.

How to set the temperature in a two-chamber Samsung refrigerator

If the Samsung refrigerator is two-chamber, the freezer is configured separately, it may have an accelerated freezing function. The intensive mode lasts no more than 72 hours, with an automatic transition to the standard level.

Once connected, the new device can work for a day without stopping. You can start setting the temperature after the mode has stabilized. It is important to follow the instructions. You can change the temperature using the buttons and display, or the manual controller. The manual developed for each series of Samsung refrigerators provides information on how to regulate the mode.

How to correctly set the temperature in a Samsung No Frost refrigerator

Using the example of a Samsung refrigerator with the No Frost system model RL33 EAMS, we will figure out why the temperature on the display fluctuates. Flashing is due to reasons related to incorrect temperature conditions. Deviations are common.

The temperature in the Samsung refrigerator is higher than the set temperature due to frequent opening of the door in a very warm room. If you do not open the circuit for 2-3 hours, the blinking will stop. The temperature may be unattainable under these conditions. Then there is nothing left to do but rearrange the task on the display towards an increase.
The mode is not set, the indicators notify you of the need to set control points for the correct operation of the system.
One of the temperature sensors is faulty.
If the door is not tightly closed, the system signals with a loud sound signal.

It should be noted that Samsung refrigerators are the most reliable and are adapted to work in Russian energy supply conditions.

The instructions on how to set the temperature included with the Samsung double-chamber refrigerator allow you to independently adjust the equipment. When setting up, you should follow the manufacturer's recommendations, which will extend the life of the equipment and ensure the safety of products.

SAMSUNG refrigerator and its settings

The instructions on how to set the temperature included with the Samsung double-chamber refrigerator allow you to independently adjust the equipment. When setting up, you should follow the manufacturer's recommendations, which will extend the life of the equipment and ensure the safety of products.

The optimal temperature in the refrigerator and freezer is indicated in the documentation. The manufacturer recommends setting the freezer to -18°C, ensuring uniform cooling of the refrigerator compartment. The technical characteristics of the compressor make it possible to reduce the air temperature to -26°C; the function is used for accelerated freezing of products. Prolonged operation of the equipment at maximum performance leads to damage to components and failure of the refrigerator.

The standard air temperature in the refrigerator compartment does not exceed 5°C. Samsung produces units with convection heat exchange, which differ in varying degrees of heating of the air inside the compartment. The electronically controlled Samsung No Frost refrigerator is equipped with fans for forced movement of air masses; the temperature spread inside the refrigerator compartment does not exceed 1°C.

How to setup

The user must set the temperature in the Samsung refrigerator manually, focusing on the degree of equipment load and external conditions. The attached setup and operating instructions contain tips for adjusting the product. The refrigerators are equipped with sensors that measure the air temperature inside the equipment, as well as in the room and the evaporator housing. The information is transmitted to the electronic control unit, which adjusts the compressor performance.

in the refrigerator compartment;
inside the evaporator;
in the freezer;
on the body, outside the sealed space.

How to adjust the temperature within the permitted sector is written in the instructions for the Samsung refrigerator; use the expert’s advice in the video from practical experience. To change the mode, you can use the Cooling Power, Fridge buttons and the display or manual thermostat. Do not try to set the minimum temperature, this increases power consumption.

How to correctly set the temperature in a Samsung No Frost refrigerator

Using the example of a Samsung refrigerator with the No Frost system model RL33 EAMS, we will figure out why the temperature on the display fluctuates. Flashing is due to reasons related to incorrect temperature conditions. Deviations are common.

The temperature in the Samsung refrigerator is higher than the set temperature due to frequent opening of the door in a very warm room. If you do not open the circuit for 2-3 hours, the blinking will stop. The temperature may be unattainable under these conditions. Then there is nothing left to do but rearrange the task on the display towards an increase.
The mode is not set, the indicators notify you of the need to set control points for the correct operation of the system.
One of the temperature sensors is faulty.
If the door is not tightly closed, the system signals with a loud sound signal.

It should be noted that Samsung refrigerators are the most reliable and are adapted to work in Russian energy supply conditions.

Samsung refrigerators are in high demand due to their low noise operation, economical energy consumption and optimal temperature in the chambers.

The manufacturer has left the opportunity to independently regulate the mode within limited limits, following the instructions for setting the temperature in the Samsung refrigerator.

How to set the temperature in the refrigerator can be found in the video.

with freezer;

without freezer compartment;

freezer compartment only.

Absorption refrigeration systems are quiet and lighter in weight compared to compressor systems. Their performance is much lower than that of compressor refrigerators and, simply put, they produce less cold. Their internal temperature depends on the ambient temperature due to the mechanism of temperature transfer from liquefied ammonia.

Since the system uses ammonia circulating under pressure, its leakage is extremely dangerous for humans and can damage the mucous membrane and respiratory tract. If you find problems with absorption models, you should immediately contact the service center. The procedure for repairing such household appliances is carried out only in the factory by professionals equipped with special protection.

We suggest you familiarize yourself with the height at which you should hang your TV.

Settings for the compartment with a reduced temperature are provided with multifunctional capabilities, but in general, the adjustment is made in the same way as in the previous version.

The freezer has more modes, for example, some models have an accelerated freezing function: the temperature drops for three days and then is restored.

What temperature should it be

How to setup

The user must set the temperature in the Samsung refrigerator manually, focusing on the degree of equipment load and external conditions. The attached setup and operating instructions contain tips for adjusting the product. The refrigerators are equipped with sensors that measure the air temperature inside the equipment, as well as in the room and the evaporator housing. The information is transmitted to the electronic control unit, which adjusts the compressor performance.

Drip system

Equipment with a drip defrosting principle has different temperature settings for the refrigerator compartment and freezer. Changes in the temperature background in the freezer are automatically reflected in the state of the main compartment.

To adjust the temperature in a Samsung refrigerator, you need to set the desired value using the rotary corrector or buttons; the number is displayed on the display (if there is a unit). To check the operation of the unit and the correctness of the device readings, use a glass of water, which is placed in the center of the refrigerating chamber. The water temperature should be 1-5°C (determined using a household thermometer placed in a container).

Possible problems and their solutions

When using Samsung equipment, users encounter a number of problems:

An increase in temperature inside the chambers caused by frequent opening of the front doors. To correct the situation, you should leave the product locked for 1.5-3 hours, the temperature inside the case will return to normal. The malfunction occurs when there is no air circulation around the heat exchanger located on the rear wall of the housing. To improve cooling conditions, it is recommended to move the equipment away from the wall and provide a gap between the sides and the furniture.
When installing refrigeration equipment near heating radiators or under direct sunlight, the housing overheats, leading to an increase in the temperature background in the freezer or refrigerator compartment. It is necessary to move the product to another room or install protective heat shields.
The indicator installed on the door is broken. The defect occurs when rearranging door hinges due to an erroneous or loose connection of the plugs. To restore functionality, disconnect the connectors and then correctly connect the wiring harnesses.
Error when adjusting the equipment (incorrectly set cooling value). The problem can be solved by adjusting the settings in accordance with the manufacturer's recommendations.
Supply of warm water from a dispensing tap (used on some equipment modifications). To cool the liquid, air flows circulating in the refrigerating chamber are used; to reduce the temperature, it is necessary to increase the performance of the compressor.
Flashing of the display section displaying the temperature value in the refrigerator compartment. The defect occurs when the doors are open for a long time or after hot products are placed on the shelves. To eliminate the defect, you need to turn off the power for 10 minutes; after turning on and rebooting the controller, the blinking stops.
Freezing of food when located near the ventilation ducts in the refrigerator compartment is not a malfunction, since cooled air is supplied from the duct. It is recommended to move the products to another section or install a shelf at a distance from the ventilation window.

An additional reason is a breakdown of the electronic temperature measurement sensor or a break (oxidation) of the connecting harness. To restore the unit, you must contact a service center; independent intervention in the design of the refrigeration unit leads to irreversible damage to the units.

How to adjust the temperature in a Samsung refrigerator?

The average user does not always bother with setting the correct temperature in the refrigerator, which can lead to operational problems. The presented material will tell you about the operating mode of the devices, which allows you to preserve food and the cooling device. We will describe the technical details and common breakdowns encountered during operation.

No Frost models from the global manufacturer Samsung come with instructions. The latter allows the user to independently determine the appropriate method of operation of the device. We advise you to follow the manufacturer's instructions to prevent incidents when using the refrigerator.

Let's figure out what to set as the correct temperature in the type of device under discussion:

The manufacturer prescribes the number of degrees for the freezer to be -18. As soon as you set the temperature in the Samsung refrigerator, a uniform distribution of cold flow will begin;
There is an accelerated method of bringing products to the desired condition. The manufacturer took care of creating a compressor that allows you to set it to -26 degrees.

Avoid prolonged freezing at maximum temperature! Otherwise, the component modules of the device may be damaged and a breakdown will occur.

The standard number of degrees operating in the refrigeration compartment is 5. Convection heat transfer is inherent in equipment produced by Samsung. These installations are capable of heating the space in the chambers in different ways. Samsung No Frost – models with electronic control. They contain fans that move air, and the difference in temperature is within one degree Celsius.

Depending on the following conditions, a suitable indicator is set:

equipment load level;
external environment.

The user manual will tell you the correct setting of modes. Now about the sensors in Samsung No Frost refrigerators. The instructions (how to set the temperature) were drawn up by the manufacturer taking into account the readings given by the measuring instruments.

The compartments include sensors to keep the system at optimal degrees. The information supplied to the control panel affects the temperature of all sections of the refrigerator.

As for the sensors, the general type of measuring devices works with all the insides of the refrigerator, detects the air in the freezer and measures the temperature of the external environment. The sensor is located in the central part of the refrigerator compartment and displays the average temperature.

It’s worth knowing about two-chamber refrigeration units: they contain separate regulators. Some devices are equipped with additional buttons that enable accelerated operation of both compartments. When equipment was transported in winter, the device was left idle in a warm building for 10 or 12 hours before adjustments.

How to change the temperature in a Samsung refrigerator? The procedure consists of 2 steps:

preliminary setting of the minimum number of degrees per hour. The freezer cools down during the specified period of time. The compressor then operates under stable conditions;
setting the preferred degrees for cooling products by rotating the knob or pressing the keys. A number of models are equipped with a pair of compressors. Then the compartment for the refrigerator and freezer is configured separately.

Some units are equipped with a control unit, the characteristics of which include setting the operating mode. The manufacturer took care of the Freezer key, which gradually changes the cooling level. If Freezer is held for three seconds, rapid freezing is activated, which is deactivated after 50 hours.

If you need to freeze a set of products 15 or 20 hours before the procedure, press the button. Holding Freezer also allows you to turn off boost cooling early.

We present instructions on how to set the temperature in a Samsung refrigerator using the following button available for consumer management. The Fridge key configures the cold flow of food in No Frost devices:

changing the operation is carried out with short presses;
energy savings (Vacation) activated by holding;
disabling the installed method by pressing again briefly.

The next mode in Samsung CoolSelect Zone allows you to switch the device to optimal preservation of meat or fish.

It's time to talk about technology that includes a drip system. Defrosting according to the designated principle means that the freezer and refrigerator compartments have separate settings. Adjusting the degrees in the freezer affects the air inside the refrigerator itself.

To set the temperature background, turn the corrector or manipulate the keys. The number of degrees is shown on the device control screen.

After changing the temperature, place a container of water in the Samsung refrigerator. The glass should be located in the central part of the main compartment. Using a room thermometer, measure the heating of the liquid - achieve a range of 1-5 degrees.

Let's look at the most typical difficulties that arise during the operation of refrigeration units:

rising temperature in the compartments due to the constant opening of the front doors. Keep the device closed for 2-3 hours - the “climate” inside will normalize;
degrees also increase due to exposure to sunlight - the equipment works optimally in a shaded place or when covered with thermal screens;
indicator malfunction caused by reinstallation of door hinges and “crooked” wiring contact. Disconnect the plugs and correctly communicate the cables responsible for supplying signals to the digital display;
incorrectly set number of degrees - follow Samsung’s advice;
Once you have set the temperature, do not place hot culinary products in the Samsung refrigerator, and also avoid opening the doors for a long time. The system reminds you of operational violations by flashing the control indicator. Disconnect the device from the network for 10 minutes - when you restart, the flickering of the display will disappear.

We suggest you familiarize yourself with How to properly clean flounder before frying, baking or stewing

Conclusion

Finally, we’ll tell you about the main differences between No Frost refrigerators and traditional models and warnings about repairs.

uniform distribution of the degree of cooling (the difference is no more than 2 degrees) due to the forced circulation of air masses;
long-lasting setting of the starting temperature, which contributes to high-quality food preservation and energy savings;
the device does not require manual defrosting - the process is automated;
dry defrosting, in which a compartment heats up frost and ice comes into operation. The aggregate state of the latter is transformed into vapor.

Please note: DIY repair of a refrigeration unit can be explosive. If, after changing the temperature, problems are observed in the Samsung refrigerator, trust the specialists.

The fact is that the devices accumulate isobutane. The latter is a refrigerant that can ignite on contact with oxygen. Service center employees will take the following measures:

will reduce the concentration of explosive gas;
they will remove from the device spare parts that also accumulate undesirable components;
diagnose the external condition of the device for the presence of smudges or burning;
will immediately begin to find the cause of the problems.

Samsung produces several models of refrigerators. They differ not only in design, but also in functions. Accordingly, each type requires its own temperature regime. Now on sale you can find the following types of units from a recognized Korean brand:

Two-chamber. For two-chamber models, the freezer is on top. These rather compact units have been produced for quite a long time, but are still very popular.
Combi. Combi class models have a large freezer compartment at the bottom. The cameras are autonomous and have separate cooling.
Side-by-side. This model consists of several cameras. Outwardly, it resembles a closet; each compartment has its own door.

For the freezer this value is 18

In the refrigerator compartment no more than 2.

It is also worth noting that some models are equipped with a so-called “freshness zone” in the refrigerator compartment, where the temperature remains stably around zero. This allows you to avoid freezing food and at the same time preserve its taste.

This largely depends on what model and type. Even inside the unit the temperature is different:

The average for a freezer is usually 18°C.
The refrigerator compartment should not be warmer than 2°C, on average - no higher than 3°C.

Setting the temperature in a Samsung refrigerator, as well as in models of some other brands, is done using the control panel. She, in turn, gives a “command” to the sensors that are located inside. These elements serve to set the optimal temperature in each compartment and maintain it for a long time. From the sensor, information is sent to the control circuit, which is “responsible” for the operation of the compressor.

https://www.youtube.com/watch?v=SMWyGlLpcGc

The following sensors are available:

general;
freezer;
environment.

The common sensor is located in the central part of the refrigerator compartment. It gives an average indicator, on the basis of which the mode is determined. Almost all models have universal 502AT temperature controllers. If the sensor fails, it must be replaced immediately, otherwise the unit will first work unstably and then stop altogether.

Each refrigerator model comes with instructions that must be read carefully and followed in the specified order. On the control panel you will find a display where you can see information about the mode and errors. For models in which the freezer and refrigerator are located in the same cabinet, the temperature is controlled as follows:

Measure the exact cooling temperature - to do this, place a glass of water in the central compartment.
If the water cools to 4°C, this is the best option; in the central part of the unit this temperature should be.
If the temperature is 1-2°C higher or lower than optimal, adjustment is needed.
On the control panel, find the Cooling Power or Fridge button and press it.
If there is no button, find the thermostat knob and turn it to the desired angle - from 1°C to 7°C.