Rating of the best batteries for screwdrivers in 2021


Types of batteries for screwdrivers

The diversity of rechargeable batteries is due to the fact that various chemical elements can be used as electrodes and electrolytes. The quality of operation of the power tool used depends on the correct choice of energy storage device. The following 4 types are most widespread in the field of electrical appliances:

  • nickel-cadmium (Ni-Cd);
  • nickel metal hydride (Ni-MH);
  • lithium-ion (Li-Ion);
  • lithium polymer (Li-Pol).

Let's take a closer look at each of them.

Nickel-cadmium batteries

Despite the fact that this species appeared at the end of the 20th century, their mass production began only in the middle of the next century. They use nickel as a positive electrode and cadmium as a negative electrode. Most often they have the shape of a cylinder, for which they received the popular name “banks”.

Nickel-cadmium batteries used to operate screwdrivers have a number of advantages:

  • can be operated at low temperatures without much loss of charge, which is a huge plus when working outside in winter;
  • up to 1000 charge-discharge cycles;
  • there is no risk of spontaneous combustion;
  • high load capacity;
  • can remain in a discharged state for a long time without losing their properties;
  • the ability to restore failed batteries;
  • can be used until completely discharged.

Despite the existing advantages, Ni-Cd batteries have some disadvantages:

  • toxicity of substances filling the “jar”;
  • complex disposal of used devices;
  • heavy weight;
  • self-discharge of the battery, which reduces capacity and voltage;
  • memory effect, which occurs when the battery is not completely discharged and subsequently reduces its capacity.

It should be noted that nickel-cadmium batteries are recommended to be stored in a completely discharged state.

Nickel metal hydride batteries

The creation of this type of element began in 1970. However, the unstable operation of the first samples necessitated the search for new metal hydride alloys. It was only after the 80s that Ni-MH batteries were improved. The new type of battery has the following advantages:

  • they have virtually no memory effect;
  • no toxic components are used in their production;
  • ease of disposal;
  • capacity is 30% greater than that of nickel-cadmium;
  • light and compact;
  • are not afraid of mechanical damage.

Minuses:

  • takes a long time to charge;
  • 500-600 charge-discharge cycles;
  • after 300 cycles, a decrease in capacity can be observed;
  • cannot be used at sub-zero temperatures;
  • cannot be completely discharged;
  • higher cost compared to the previous type.

Store nickel-metal hydride batteries half-charged and in a cool place.

Li-ion batteries

Li-Ion batteries appeared in the 90s thanks to Sony. The first elements of this type were characterized by increased explosiveness. Only 20 years later they got rid of this problem. Currently, this is a battery with high performance and a number of advantages over the previous ones:

  • short charging period;
  • there is practically no memory effect;
  • minimal self-discharge;
  • the capacity does not decrease when charging an incompletely discharged battery;
  • absence of toxic components in the composition;
  • long service life.

Despite the apparent advantages of lithium-ion batteries, there are some disadvantages:

  • mechanical damage must not be caused, because there is a possibility of an explosion from impact;
  • quickly fail under severe discharge;
  • are not subject to restoration measures;
  • discharge quickly at sub-zero temperatures.

Lithium polymer batteries

This type of battery was developed based on lithium-ion batteries. The difference is that the liquid electrolyte has been replaced with a gel-like polymer. This, first of all, increased the safety of using these elements. In addition, the capacity has increased, and the weight and dimensions, on the contrary, have decreased. So, the pros:

  • no memory effect;
  • practically no self-discharge;
  • have a higher capacity than Li-Ion;
  • can be very thin (up to 1 mm) and of various shapes;
  • can be used in temperature conditions from -20 to +40 Celsius.

Disadvantages of Li-Pol batteries:

  • service life - no more than 3 years;
  • expensive;
  • cannot be completely discharged;
  • There are many nuances of operation and charging.

For screwdrivers, this type of battery is rarely used, which is due to its high cost.

It is difficult to say unequivocally which battery is better for screwdrivers. Each type of battery has its own advantages and can be used in different conditions. For rare everyday use, nickel-cadmium batteries are more suitable, as they can be stored for a long time without loss of properties. In addition, they can be used outdoors at low temperatures. If you use a screwdriver often and for a long time, then it is better to give preference to lithium-ion batteries. They are more capacious, do not self-discharge and quickly become infected.

Thus, the choice of battery for a screwdriver should take into account the features and operating conditions, as well as the tasks assigned to the power tool.

Below are the best, according to users, rechargeable batteries for screwdrivers from the most popular companies: Bosch, Hitachi, Makita.

Battery device

This is a plastic case that contains mini batteries connected to each other by contact tape. The ends of the tape are brought out in the form of elongated contact plates. The screwdriver itself has a hole into which the protrusion of the battery housing with side terminals fits.

Different manufacturers of hand-held power tools make the battery housing detachable or non-removable. If you have some experience, you can disassemble permanent connections without causing harm to the battery. Collapsible housings are opened with a screwdriver, which is used to unscrew the mounting screws.


Power unit design

Inside the unit there is a row of cylindrical batteries. This can be 8, 10 or 15 batteries. They are usually built in 2 tiers. The top row contains 2 or 3 elements.

The batteries for all screwdrivers are connected with a nickel metal tape in a sequential order (from minus to plus). The tape is spot welded to the cans.

Batteries compatible with Bosch screwdrivers

Hammer AKB1215

The nickel-cadmium battery pack is made in the form of a clip. Voltage - 12 V, capacity - 1.5 A×h.

Average cost: 1960 rub.

Hammer AKB1215

Advantages:

  • ability to use at low temperatures;
  • optimal price-quality ratio.

Flaws:

  • memory effect, which obliges you to charge the battery only when it is completely discharged;
  • there is no charge level indicator.

Charge NKB 1220 BS-A 6117108

The battery consists of 10 nickel-cadmium cylindrical cells HYCPSC2000N. They are combined into a single block, made in the form of a clip. Voltage - 12 V, capacity - 2 Ah.

Average cost: 1530 rub.

Charge NKB 1220 BS-A 6117108

Advantages:

  • operation in a wide temperature range from -20 to 65°C is acceptable;
  • inexpensive.

Flaws:

  • The battery is self-discharging.

Practice (031-631) 12V, 1.5 Ah

Nickel-cadmium battery for Bosch screwdrivers. Made in the form of a clip. Approximate charging time is up to one and a half hours. Capacity - 1.5 Ah, voltage - 12 V. Manufacturer - China.

Average cost: 1690 rub.

Practice (031-631) 12V, 1.5 Ah

Advantages:

  • collapsible;
  • charges quickly;
  • It is possible to replace faulty “banks”.

Flaws:

  • gradual decrease in capacity.

Hammer AKB1813Li

The lithium-ion battery in the form of a slider is designed to replace the original batteries in Bosch screwdrivers and drills. Voltage - 18 V, capacity - 1.3 A×h.

Average cost: 2450 rub.

Hammer AKB1813Li

Advantages:

  • short charging time;
  • there is practically no decrease in capacity over time;
  • light weight.

Flaws:

  • cannot be used at sub-zero temperatures;
  • there is no charge level indicator.

Bosch 1600A012UV

Lithium-ion battery with a capacity of 3 Ah, made in the form of a slider. The operating time is increased by half compared to similar models. A distinctive feature is a very durable case that is not afraid of falls even on concrete.

Average cost: 4370 rub.

Bosch 1600A012UV

Advantages:

  • no memory effect;
  • can be stored for a long time without loss of charge;
  • There is a charge level indicator.

Flaws:

  • afraid of sub-zero temperatures.

Pitatel TSB-048-BOS12A-33M

Nickel-metal hydride battery with a capacity of 3.3 Ah. This capacity allows you to perform a large amount of work without recharging.

Average cost: 2490 rub.

Pitatel TSB-048-BOS12A-33M

Advantages:

  • can be used at low temperatures;
  • non-toxic;
  • housing made of durable plastic.

Flaws:

  • requires recharging during long-term storage.

Bosch 2607335686

Professional nickel-metal hydride battery. Capacity - 2.6 Ah, voltage - 14 V.

Average cost: 9690 rub.

Bosch 2607335686

Advantages:

  • no memory effect;
  • can be used at low temperatures;
  • long service life (up to 1500 charge cycles).

Flaws:

  • Expensive.

Comparison of battery specifications for Bosch

Battery nameTypeCapacity (Ah)Voltage (V)Weight (g)
Hammer AKB1215Ni-Cd1,512600
Charge NKB 1220 BS-A 6117108Ni-Cd212690
Practice 031-631Ni-Cd1,512600
Hammer AKB1813Li-Ion1,318362
Bosch 1600A012UVLi-Ion318450
PITATEL TSB-048-BOS12A-33MNi-Mh3,312726
BOSCH 2607335686Ni-Mh2,614850

The best batteries for a BOSCH screwdriver (Bosch)

Chargers can be divided into three main speed categories (these do not apply to lithium-ion batteries):

Slow - it will take 14-16 hours

Fast - 3-6 hours. It is important to have a quality unit for faster charging. This is important because overcharging is one of the main causes of memory effect with nickel-based batteries.

Super fast - about an hour. Fast charging is best for NiCd and NiMH batteries because it reduces memory effect. Choosing a good device that switches to "fine charging" at the right time is also important for fast chargers.

Battery BOSCH 1600Z00036 18 V

Bosch GBA 18V plug-in battery; 2.0Ah; Li-Ion (1.600.Z00.036) is designed for Bosch cordless tools. Battery cells are electronically controlled to increase battery life.

This is also facilitated by the absence of a memory effect. Suitable for all tools and chargers within the same series. A backlit charge indicator will warn you when it is time to charge the battery.

  • battery type: Li-Ion
  • voltage 18 V
  • capacity 2 Ah

Battery for BOSCH screwdrivers 12 V, 2.0 Ah, NiCd

The nickel-cadmium battery “CHARGE” is intended as a battery for the corresponding models of Bosch tools.

  • battery type: Ni-Cd
  • battery device: clip
  • voltage 14.4 V
  • capacity 2 Ah

Batteries compatible with Hitachi screwdrivers

Charge NKB 1220 HT-A

Nickel-cadmium battery with a capacity of 2 Ah and a voltage of 12 V. Consists of 10 cylindrical elements HYCPSC2000N, size – SC. Hitachi battery chargers are suitable for charging. Looks like a clip.

Average cost: 1800 rub.

Charge NKB 1220 HT-A

Advantages:

  • long service life;
  • can be used at negative temperatures.

Flaws:

  • self-discharge is present.

Practice 031-679

Nickel-cadmium battery for Hitachi tools. Voltage - 12 V, capacity - 1.5 A×h. Charging time is no more than 90 minutes.

Average cost: 1690 rub.

Practice 031-679

Advantages:

  • holds a charge for a long time.

Flaws:

  • decrease in capacity over time;
  • fragile plastic body.

Pitatel TSB-026-HIT14B-40L

Lithium-ion battery pack with a capacity of 3 Ah with a voltage of 14.4 V. Ideally replaces the original Hitachi battery and is not inferior to it in performance.

Average cost: 3490 rub.

Pitatel TSB-026-HIT14B-40L

Advantages:

  • no reduction in capacity;
  • With proper use they can last a long time.

Flaws:

  • cannot be used at sub-zero temperatures.

Pitatel TSB-149-HIT18D-15L

Lithium-ion battery in the form of a slider with a capacity of 1.5 Ah. Voltage - 18 V.

Average cost: 2230 rub.

Pitatel TSB-149-HIT18D-15L

Advantages:

  • charges quickly;
  • There is practically no memory effect.

Flaws:

  • afraid of strong impacts and mechanical damage.

Hitachi EB1233X

Nickel-metal hydride battery pack with a capacity of 3.3 Ah. This battery capacity increases the time you can use tools without recharging significantly compared to other types of batteries. This model belongs to the professional series.

Average cost: 6880 rub.

Hitachi EB1233X

Advantages:

  • charging time - no more than 90 minutes;
  • low memory effect;
  • durable body;
  • reliable grip on the tool.

Flaws:

  • not found.

TopOn TOP-PTGD-HIT-12-3.3

Nickel-metal hydride battery for Hitachi screwdrivers. Large capacity (3 Ah) ensures long-term and uninterrupted operation of the power tool.

Average cost: 2190 rub.

TopOn TOP-PTGD-HIT-12-3.3

Advantages:

  • equipped with a protection system against overload and overheating;
  • long service life.

Flaws:

  • gradual decrease in capacity;
  • It is not advisable to use at air temperatures below zero.

Comparison of battery specifications for Hitachi

Battery nameTypeCapacity (Ah)Voltage (V)Weight (g)
Charge NKB 1220 HT-ANi-Cd212690
PRACTICE 031-679Ni-Cd1,512610
PITATEL TSB-026-HIT14B-40LLi-Ion314,4592
Pitatel TSB-149-HIT18D-15LLi-Ion1,518499
Hitachi EB1233XNi-Mh3,3121600
TopOn TOP-PTGD-HIT-12-3.3Ni-Mh312

Conclusion

Which batteries are best for a screwdriver? If the screwdriver is used once or twice a year, then nickel-cadmium batteries will be more suitable. If the tool is used every day for several hours, then lithium-ion battery packs are recommended.

The batteries will serve the required number of cycles and will “wash off” the money spent on them. Don't buy lithium unless it will be used frequently. This is money wasted.

However, if the tool is used in freezing temperature conditions, it is recommended to use a cadmium battery.

Batteries compatible with Makita screwdrivers

Charge NCB 1415 MK-A

Nickel-cadmium battery with a capacity of 1.5 Ah. Consists of 12 HYCPSC1500N SC size elements. The battery's cage design provides a secure grip and continuous electrical contact with the tool.

Average cost: 1550 rub.

Charge NCB 1415 MK-A

Advantages:

  • you can disassemble and change individual elements;
  • holds a charge well.

Flaws:

  • memory effect;
  • self-discharge is present.

Makita PA12 (193981-6)

Nickel-cadmium battery for Makita screwdrivers. Capacity - 1.3 Ah, voltage - 12 V. The battery is cubic in shape.

Average cost: 1990 rub.

Makita PA12 (193981-6)

Advantages:

  • does not heat up when charging with high currents;
  • can be used at temperatures down to -20°C;
  • service life up to 2000 charge-discharge cycles.

Flaws:

  • memory effect;
  • self-discharge 10%.

Makita BL1830

Lithium-ion rechargeable battery in the form of a slider. Multi-pin fastening ensures uninterrupted operation of powerful Makita screwdrivers. Large capacity (3 Ah) allows you to perform a large amount of work without frequent recharging.

Average cost: 3850 rub.

Makita BL1830

Advantages:

  • no memory effect;
  • charges quickly;
  • There is practically no self-discharge.

Flaws:

  • cannot be used at low temperatures.

Makita BL1860B

High-capacity lithium-ion battery (6 Ah) for powerful power tools. 16 contacts provide a reliable and continuous electrical connection to the tool. The shock-resistant case protects the battery from mechanical damage.

Makita BL1860B

Advantages:

  • there is a charge indicator;
  • built-in protection against overheating and over-discharge;
  • short charging time (60 min);
  • can be used at temperatures down to -20°C.

Flaws:

  • not found.

Makita 193101-2 1434

Compact nickel-metal hydride battery with excellent technical and performance characteristics. Capacity - 2.5 Ah, voltage - 14.4 V, charging time - from 10 to 90 minutes.

Average cost: 5890 rub.

Makita 193101-2 1434

Advantages:

  • can be used at temperatures down to -40°C;
  • no memory effect;
  • service life up to 2000 charging cycles.

Flaws:

  • not found.

Sino Power 100157298V

Reinforced nickel-metal hydride battery for Makita power tools. Capacity - 3 Ah, voltage - 14.4 V.

Average cost 2690 rub.

Sino Power 100157298V battery for Makita

Advantages:

  • large capacity, which increases the operating life without recharging;
  • non-toxic, no problems with disposal;
  • no memory effect.

Flaws:

  • production: China.

Comparison of battery specifications for Makita

Battery nameTypeCapacity (Ah)Voltage (V)Weight (g)
Charge NCB 1415 MK-ANi-Cd1,514,4730
Makita PA12 (193981-6)Ni-Cd1,312668
Makita BL1830Li-Ion318496
MAKITA BL1860BLi-Ion618496
Makita 193101-2Ni-Mh2,514,4670
Sino Power 100157298VNi-Mh314,4
Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]