TOP 25 best corded screwdrivers: 2021 rating by price/quality and which inexpensive one to choose for your home

A screwdriver is one of the most popular power tools.
Necessary for minor repairs, furniture assembly and finishing work. This is an indispensable assistant for builders, furniture makers and home craftsmen. After analyzing the range of drill-drivers market, we compiled ratings of the best models for 2021.

Such indicators as reliability, functionality, ease of use, as well as price/quality ratio were taken into account.

Reviews from professionals and ordinary customers were also studied, which made it possible to determine the leaders in the rating.

Rating of the TOP 25 best corded screwdrivers of 2021

Rating of the TOP 15 best network screwdrivers of 2020-2021

How to choose a corded screwdriver?

Buying a screwdriver includes the stage of becoming familiar with its characteristics, the most important of which are the following:

• Power . The higher this parameter, the harder the material the screwdriver can work with. The power of household models, as a rule, does not exceed 550 W.
• Torque . Measured in Newton meters, it demonstrates the force to which fasteners are subjected. The higher this indicator, the longer the fastener can be tightened. For home use, 10-15 Nm is enough; for professional work, a torque of up to 40 Nm is needed.
• Speed ​​control . This function allows you to change the force exerted by the screwdriver on the fastener. The higher the force, the deeper the screw will go into the material. To drill, you need to switch the screwdriver to a mode specially designed for this.
• Reverse . A tool with reverse motion is more convenient to work with. Previously, only professional models had this function; today the vast majority of screwdrivers have it.

How to choose a corded drill/driver

The choice of power tool is made based on technical characteristics and taking into account the specifics of the application. The user evaluates the power of the installed engine, the moment of force and the presence of impact. Comfort during operation is affected by the type of chuck, the presence of rubberized handles, reverse and backlight. Only taking these features into account can you buy a drill/driver that will help solve your problems.

Power

Determines productivity and the ability to drill materials with different density parameters. Household models are equipped with electric motors of 300-320 W, this is enough to work with 65-70 mm self-tapping screws, sheet steel, and 100-150 mm wood. Semi-professional and professional tools are equipped with 450-600 W motors. This allows you to drill through thick steel plates and withstand intense work. When analyzing power, it is worth considering that as the performance increases, the weight of the device increases.

Moment of power

The second most important parameter affecting performance. The greater the torsion moment, the longer the self-tapping screw can be screwed into the base. To work with 65-70 mm screws, a model in which the indicator does not exceed 30 N*m is sufficient. It is better to tighten self-tapping screws 95-100 mm with a power tool, with characteristic values ​​of 40-45 N*m. The best manufacturers equip the device with torque regulators: the user can configure a powerful tool to work with small self-tapping screws.

Chuck type

The fixture is fixed in the chuck. During repairs, the user uses drills of different diameters and bits. You can quickly replace it using a quick-release chuck. This design has its drawbacks: it is not recommended for permanent drilling in iron or driving screws into dense wood. An alternative is the key cartridge. To fix the equipment in it, a steel key is used, working with which requires time and physical effort. The chuck can withstand high loads, the tool can be used to work with hard materials.

Presence of impact

To work with brick and concrete, it is recommended to buy a model with an impact function. The design feature of the equipment is the performance of translational movements while simultaneously rotating. This allows you to cope with high-density material. A drill-driver with an impact function is relevant on a construction site when performing repairs. It can be used to install anchors for a heavy cabinet or bookshelf.

TOP 5 best corded screwdrivers by price/quality for 2021

Makita DF0300, box, 320 W

The Makita DF0300 hammerless corded drill/driver can be used when assembling furniture, screwing various fasteners, and also when installing drywall structures .
The two-speed gearbox makes it possible to adapt to a specific task. You can choose one of 20 torque levels, suitable for a specific material and type of fastener.

The tool has a powerful torque of 56 Nm . It is ergonomic and has optimal weight distribution: holding it in your hands, the master will not feel tired for a long time. Compact dimensions make it easy to work in hard-to-reach areas. The rubberized handle does not slip.

The quick-release chuck allows you to change accessories in just a few movements..

The reverse option is designed to make it easier to remove a jammed drill from the material.

Characteristics:

• screwdriver torque: 56 Nm;
• equipment weight: 1.2 kg;
• additional device options: protective locking of the operating button, speed control;
• model cartridge diameter: 1 – 10 mm;
• reverse option;
• quick-release chuck.

pros

neat assembly;

reliability;

ease of use.

Minuses

short cord.

BISON DSH-M3-500-2 box, 500 W

BISON DSH-M3-500-2 is an ideal assistant both at home and in the professional field .
Functionality and ease of use make the mechanism quite versatile. Battery independence increases productivity without downtime for charging. The 2-speed gearbox provides both high torque for tightening fasteners and significant rotation speed for drilling .

The maximum rotation speed of 1800 rpm helps to drill even metal workpieces easily and fairly quickly.

The torque limiting clutch prevents flaring of the splines and damage to the material. The presence of reverse allows you to change the direction of rotation for screwing in/unscrewing fasteners.

Illumination of the work area helps when working in low light conditions.

Characteristics:

• screwdriver torque: 45 Nm;
• equipment weight: 1.6 kg;
• additional device options: backlight, safety clutch, spindle lock;
• model cartridge diameter: 1.5 – 13 mm;
• reverse option;
• quick-release chuck.

pros

power;

ease of use;

reliability.

Minuses

heavy weight.

Sturm! ID2145P, 450 W

Practical and functional Sturm screwdriver! ID2145P has an affordable price .
In addition, it can be used not only for its intended purpose, but also as a regular drill - thanks to the drilling function. The portable and compact device is lightweight, so it can be easily transported if necessary.

The screwdriver works from the mains.

Provides a high level of protection against electric shock. The tool can operate in two speed modes: in the first, the number of revolutions reaches 400 per minute, and in the second - 1500.

This is the best option for use for domestic purposes, both for minor repairs and for the need to assemble furniture . A lightweight and high-quality tool is the optimal choice in this case.

Characteristics:

• screwdriver torque: 45 Nm;
• additional device options: protective locking of the operating button, speed control;
• model chuck diameter: 10 mm;
• reverse option;
• quick-release chuck.

pros

neat assembly;

ease of use;

possibility of professional use.

Minuses

heating the case.

STAVR DShS-10/450-2S, 450 W

STAVR DShS-10/450-2S - drill-driver powered from the mains .
Such a tool will be useful for both an amateur craftsman and a professional who needs to perform simple work, for example, drilling holes in the wall for a bookshelf or assembling a cabinet. The two-speed gearbox and electronic torque control function make it easy to select the optimal mode for drilling holes in materials of varying hardness .

The drill is simple and convenient to use. It is equipped with a quick-release chuck, so you can replace a bit or drill with minimal time and without a special key.

The ergonomically shaped rubberized handle does not slip in the palm of your hand, and for long continuous work you can press the power button and lock it in this position - this way you will get less tired.

Characteristics:

• drilling diameter (when working with wood): 29 mm;
• drilling diameter (when working with metal): 12 mm;
• equipment weight: 1.5 kg;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

reliability;

power;

neat assembly.

Minuses

not found by users.

VORTEX SSH-550/1, 550 W

The WIHR SSH-550/1 electric screwdriver is suitable for assembling furniture, repairing household appliances and dismantling building structures .
It provides you with 19 levels of torque limitation and a special mode for drilling. The wide handle with non-slip coating will help you hold the tool securely in your palm.

The spindle rotation speed depends on the force of pressing the start button.

The corded device is equipped with a brush motor and a quick-release chuck design. The device operates with a power of 550 W, reaching a speed of 800 rpm in one available mode.

The device is complemented by 20 torque levels, as well as a regulator for setting the optimal twisting depth.

Thanks to this tool, you can make holes in wood and metal with a diameter of 2.5 and 1 cm.

Characteristics:

• screwdriver torque: 20 Nm;
• equipment weight: 1.3 kg;
• additional device options: protective locking of the operating button, speed control;
• reverse option;
• quick-release chuck.

pros

neat assembly;

reliability;

ease of use.

Minuses

short cord.

TOP 5 best corded screwdrivers by price, quality and reliability for 2021

The most optimal devices are those that belong to the middle price segment and have many useful functions, high build quality and are easy to use. Their main characteristics are reliability, power and ergonomics.

Drill-driver Makita DF0300 box 320 W 56 Nm

A universal drill/driver in the mid-price segment, suitable for both home and professional use.

The design has a mount for a quick-release chuck for a bit with a diameter of 1 – 10 mm. High power and performance are provided by a maximum torque of 56 Nm and 1500 rpm.

The tool works from the mains: for this there is a compacted 2.5-meter cord.

Using a drill-driver, you can not only screw in screws, but also unscrew them due to the reverse function, as well as make holes in wooden (up to 28 mm) and metal (up to 10 mm) surfaces.

For ease of work, there is illumination of the entire working area, electronic speed control and a locking power button.

Specifications:

• Max. torque: 56 Nm;
• Max. speed: 1500 rpm;
• weight: 1.2 kg;
• number of modes: 2.

pros

• powerful;
• quick cartridge change;
• comfortable grip;
• price-quality ratio;
• doesn't heat up.

Minuses

• no shaft blocking;
• no case.

Drill-driver BISON ZSSh-300-2 300 W 35 N m

A high-quality and reliable tool allows you to screw in fasteners, unscrew them using the reverse function, and make holes in drilling mode.

The drill/driver has small dimensions, and its main advantage is a long 5-meter cord.

The spindle speed is adjustable: it is adjusted taking into account the material and fasteners to be worked with.

The manufacturer has provided the ability to quickly replace the commutator brushes and lock the power button. The cord is made of high-quality reinforced rubber, thanks to which you can work even at low temperatures: it does not “stink.”

The design involves the use of a quick-release chuck with a diameter of 0.8 - 10 mm . Power consumption - 300 W.

Specifications:

• Max. torque: 35 Nm;
• Max. speed: 1400 rpm;
• weight: 1.6 kg;
• number of modes: 2.

pros

• long cord;
• low price;
• quick-release chuck;
• easy to use;
• build quality.

Minuses

• heavy.

Drill-driver Interskol DSh-10/320E2 320 W 35 Nm

A modern and very stylish drill/driver with a comfortable handle with rubberized inserts in the grip areas and a torque of 35 Nm.

It is simple and easy to use, equipped with a 2-meter cord and electronic speed control. The torque control clutch allows you to adjust the tightening torque taking into account the material with which you plan to work.

The main equipment of the tool is a quick-release chuck with a diameter of 0.8 to 10 mm.

The drill-driver demonstrates excellent rotation speed both when screwing in fasteners and when making holes in different surfaces.

The maximum hole diameter is 10 mm in metal products, 20 mm in wooden products.

Specifications:

• Max. torque: 35 Nm;
• Max. speed: 1800 rpm;
• weight: 1.4 kg;
• number of modes: 2.

pros

• good security system;
• affordable price;
• attractive design;
• excellent speed;
• convenient replacement of equipment.

Minuses

• no backlight;
• loud.

Drill/driver Hanskonner HID2145P 450 W 45 Nm

The corded drill/driver is a powerful, versatile power tool suitable for furniture assembly and various repair jobs..

The torque is adjustable in 23 stages, so you can select the optimal power based on the material used.

The design includes a brush motor, and spare carbon brushes are included.

The diameter of the clamped equipment (chuck) is 1.5 – 13 mm . The chuck can be changed easily and quickly thanks to the quick clamping technology. You can also replace the motor brushes yourself.

For ease of use, the manufacturer added rubberized inserts to the handle . In addition, the power button is locked and the rotation speed is electronically controlled.

Specifications:

• Max. torque: 45 Nm;
• Max. speed: 1500 rpm;
• weight: 1.59 kg;
• number of modes: 2.

pros

• work in a drilling machine stand;
• spare carbon brushes included;
• cord 4 m;
• two-speed gearbox.

Minuses

• no backlight.

Screwdriver VORTEX SSH-550/2 new 550 W 34 Nm

Powerful screwdriver in a bright yellow plastic case with adjustable torque up to 34 Nm for universal use at home and in the workplace.

With its help, you can screw screws, screws, self-tapping screws and other fasteners into any surface, and it does not heat up even during long continuous operation.

The design of the device is based on a commutator motor with a planetary gearbox.

The switch is located on the handle, making it convenient to control the operation of the screwdriver. The spindle speed is adjusted by increasing or decreasing the pressure on the button.

There is also an additional button that changes the direction of its rotation: this turns on the reverse function, which is intended for unscrewing fasteners.

The device is capable of drilling holes with a diameter of up to 25 mm in wooden surfaces and up to 10 mm in metal surfaces. During operation, the entire work area is illuminated by a spotlight.

Specifications:

• Max. torque: 34 Nm;
• Max. speed: 1500 rpm;
• weight: 1.2 kg;
• number of modes: 2.

pros

• easy;
• work area lighting;
• build quality;
• does not heat up;
• smooth start.

Minuses

• short cord (2 m).

TOP 5 best networked drill-drivers

BISON DSH-M1-400 box, 400 W

Using a corded drill-driver ZUBR DSh-M1-400, assembling furniture will not be difficult .
The model's torque is 40 Nm, so it can easily handle large-sized fasteners. A wide adjustment range allows you to adjust to work with materials of different densities. The quick-release chuck ensures a good speed of changing equipment.

The device weighs only 1.36 kg, which is why long-term use does not cause severe fatigue . Special pads on the handles provide a strong grip and will prevent the tool from slipping out at the wrong moment.

The device is equipped with an LED flashlight, which will be useful for bright illumination of hard-to-reach places.

Characteristics:

• screwdriver torque: 28 Nm;
• equipment weight: 1.26 kg;
• additional device options: backlight, speed control;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

power;

possibility of professional use;

neat assembly.

Minuses

not specified by buyers.

Interskol DSh-10/320E2, 320 W

The Interskol drill DSh-10/320E2 will be a useful acquisition for any farm or workshop .
This is a universal power tool that consumes energy from a household electrical outlet, which eliminates the need to charge the battery. The power consumption of this device during operation is 260 W.

The drill has two operating speeds, which allows it to work effectively with screws and easily make holes in hard materials such as steel.

The drill is capable of making holes with a diameter of 20 mm in wood, and 10 mm in metal.

Characteristics:

• screwdriver torque: 35 Nm;
• equipment weight: 1.4 kg;
• additional device options: protective locking of the operating button, speed control;
• reverse option.

pros

neat assembly;

reliability;

ease of use.

Minuses

short cord.

Bort BSM-450X2, 450 W

Bort BSM-450X2 is an ergonomic power tool that allows you to solve many household and professional problems .
The tool has one of the most powerful motors among competitors - 450 Watt. The relatively light weight of the drill and the rubberized handle allow the user to work without forced pauses for a long time.

Due to its compact size and removable cartridge, you can easily achieve the desired result in hard-to-reach places . Options for reverse, speed adjustment, the maximum of which reaches 1000 rpm, and a 2-speed gearbox allow you to use the device with convenience and greater practicality.

Bright illumination of the work area will help you work in poor lighting conditions . The quick-release removable chuck speeds up the process of changing equipment without requiring a special key to fix it.

Characteristics:

• screwdriver torque: 35 Nm;
• equipment weight: 1.4 kg;
• additional device options: backlight, protective locking of the operating button, speed control;
• reverse option;
• quick-release chuck.

pros

power;

neat assembly;

reliability.

Minuses

short cord.

RESANTA SSH-550-2, 550 W

RESANTA SSh-550-2 – improved screwdriver for household use .
It easily screws large screws, because the torque is 36 N*m. The number of revolutions per minute at the second speed reaches 1500, so drilling wood and steel does not take much time.

Changing equipment does not require the use of a special tool, since the model has a quick-release chuck . The weight of the unit is only 1.3 kg, so it is comfortable to use for a long time.

The handle has soft inserts that dampen vibrations and prevent the device from slipping out . A flashlight is built into the lower part of the case; it will help illuminate the work area and prevent you from missing the screw.

Characteristics:

• screwdriver torque: 36 Nm;
• additional device options: backlight, protective locking of the operating button, speed control;
• model cartridge diameter: 1 – 10 mm;
• reverse option;
• quick-release chuck.

pros

reliability;

ease of use;

power.

Minuses

not marked by users.

Kolner KED 240 V, 240 W

Kolner KED 240 V, 240 W – a highly functional screwdriver, made in a universal yellow color .
The screwdriver was developed by the popular brand Kolner, whose specialization is the creation of high-quality devices that greatly simplify the repair process. The hammerless type device is equipped with a quick-release chuck . The weight of the product is 1.2 kg, but thanks to the carefully balanced design, the user's hand will not get tired. The ergonomic handle provides maximum comfort during operation - the tool fits comfortably in the hand and does not slip out.

The smart screwdriver is equipped with a reverse function that allows you to run the drill in the opposite direction if it suddenly gets stuck in the material.

Speed ​​control is also provided.

The safety of using the device is ensured by the option to lock the power button.

Characteristics:

• screwdriver torque: 12.5 Nm;
• equipment weight: 1.2 kg;
• additional device options: protective locking of the operating button;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

neat assembly;

reliability;

ease of use.

Minuses

power.

The best corded drills and drivers

Corded drills and screwdrivers are universal tools for professional and home work. When compiling the rating, the features of tools from different brands and user opinions about the functionality and ease of use of the tools were taken into account. The rating includes the 8 best screwdrivers according to owners.

Makita HP0300

The screwdriver has high performance . The model is equipped with a chuck for a bat, which is included in the kit. High-quality work results are ensured by the high power of the electric motor, torque of 56 Nm and speed of 1600 rpm.

For quick unscrewing of fasteners and removal of equipment, reverse is provided.

You can work with the tool in low light using a flashlight to illuminate the work area. The model operates in two speed modes.

Characteristics:

• power consumption - 320 W;
• torque - 56 Nm;
• speed - 1600 rpm;
• cartridge diameter – 1 – 10 mm;
• cable length - 2.5 m;
• size - 206x220x67 mm;
• weight - 1.3 kg.

Advantages:

• good assembly;
• ergonomics;
• compact size;
• long cable.

Flaws:

• power does not correspond to the declared one;
• high price tag.

Hammer DRL400A

A universal tool that combines a screwdriver and a drill . The body is made of durable plastic. The model is suitable for any repair and construction work.

Equipped with a 280W electric motor and eight torque levels to handle demanding tasks. The device operates in one speed mode.

You can change the equipment in a few seconds thanks to the quick-release chuck . Using the tool, you can drill a hole up to 10 mm in metal and up to 20 mm in wood.

The rubberized handle and weight of 1.2 kg make work as comfortable as possible.

Characteristics:

• power consumption - 280 W;
• torque - 22 Nm;
• speed - 750 rpm;
• cartridge diameter - 10 mm;
• cable length - 2.5 m;
• weight - 1.2 kg.

Advantages:

• high-quality cartridge;
• reverse function;
• high torque;
• versatility.

Flaws:

• not intended for lateral loads;
• weak gear shaft.

Makita DF0300

A universal tool for work of varying complexity . Equipped with a chuck for a bat. Performance is ensured by the high power of the electric motor and 56 Nm of torque.

The number of revolutions reaches 1500 per minute.

A reverse function is provided for quickly unscrewing fasteners and changing equipment, as well as illuminating the work area. The model is equipped with a 2.5-meter cable and a magnetic bit holder.

Characteristics:

• power consumption - 320 W;
• torque - 56 Nm;
• speed - 1500 rpm;
• cartridge diameter – 1 – 10 mm;
• cable length - 2.5 m;
• size - 206x220x67 mm;
• weight - 1.2 kg.

Advantages:

• comfortable to hold in hand;
• 2 speeds;
• slight noise;
• ergonomics.

Flaws:

• the torque force is overestimated;
• Drilling wood only up to 28 mm.

BISON ZSSh-300-3

The screwdriver is designed to perform a full range of work . With its help, you can quickly screw in and out fasteners, as well as drill holes in surfaces of different densities.

The tool is suitable for those who need to use it all day long.

The model is equipped with a 5 m cable, due to which the user’s movements are not limited.

There are 24 levels for adjusting torque and 2 speeds with a speed of up to 1400 per minute.

Characteristics:

• power consumption - 300 W;
• torque - 35 Nm;
• speed — — 1400 rpm;
• cartridge diameter – 0.8 – 10 mm;
• cable length - 5 m;
• weight - 1.6 kg.

Advantages:

• easy;
• convenient to use;
• unpretentious;
• powerful.

Flaws:

• inconvenient shift clutch;
• small warranty from the manufacturer.

Interskol DSh-10/320E2

Lightweight and ergonomic screwdriver, suitable for home and professional use . With its help you can quickly tighten and unscrew bolts, screws and self-tapping screws.

Reverse ensures easy unscrewing of a stuck drill. The maximum operating speed is 1800 rpm. The model is suitable for working with fasteners up to 6 mm.

Operates from the network using a two-meter cable connection.

The motor power is 320 W.

The functionality of the tool is ensured by the presence of two speed modes and a torque of 35 N*m.

The chuck can accommodate accessories with a diameter of 0.8-10 mm.

The maximum hole diameter in wood is 25 mm, in metal - 10 mm.

Characteristics:

• power consumption - 320 W;
• torque - 35 Nm;
• speed - 1800 rpm;
• cartridge diameter – 0.8 – 10 mm;
• cable length - 2 m;
• weight - 1.4 kg.

Advantages:

• quite powerful for household work;
• works at two speeds;
• circuit brushes;
• powerful engine.

Flaws:

• the cord is short;
• initially unpleasant smell during work.

Sturm! ID2145P

A powerful corded screwdriver that performs the functions of a drill . Connects to a single-phase 220 V network. Suitable for long and large-scale work, including construction and installation.

Performance is ensured by a torque of 35 N*m.

There are 24 torque control positions available . The model is equipped with a quick-release chuck, which allows you to use bits and drills with a diameter of up to 10 mm.

The kit includes spare brushes for the motor.

Characteristics:

• power consumption - 450 W;
• torque - 35 Nm;
• speed - 1400 rpm;
• cartridge diameter - 10 mm;
• cable length - 4 m.

Advantages:

• versatility;
• long network cable;
• suitable for long work;
• The power button is blocked.

Flaws:

• rather weak cartridge;
• high price.

Interskol DSh-10/260E

The tool is suitable for intensive work over a long period of time . With its help you can quickly tighten screws and bolts.

The manufacturer has thought through the design of the screwdriver well.

The model is equipped with a quick-release chuck and two-speed rotation speed.

You can use equipment with a diameter of 0.8-10 mm. The force on the fasteners is 25 N*m and is adjustable in 21 positions. The tool makes up to 800 revolutions per minute.

Characteristics:

• power consumption - 260 W;
• torque - 25 Nm;
• speed - 800 rpm;
• cartridge diameter - 0.8-10 mm;
• cable length - 2 m;
• size - 250×210 mm;
• weight - 1.3 kg.

Advantages:

• high power;
• low price;
• high-quality assembly;
• comfortable handle.

Flaws:

• noisy;
• heavy.

PATRIOT FS 306

Impactless type tool powered by mains . It has a high force on self-tapping screws and bolts, which ensures effective work with complex fasteners and when drilling holes.

The torque can be placed in 24 positions. The tool operates at two speeds.

It can be used to work with different materials.

You can drill a hole up to 20 mm on wood, and up to 10 mm on a metal surface . The kit includes spare brushes for the electric motor.

Characteristics:

• power consumption - 300 W;
• torque - 35 Nm;
• speed - 1390 rpm;
• cartridge diameter - 10 mm;
• cable length - 2 m;
• size - 63x225x250 mm;
• weight - 3.9 kg.

Advantages:

• comfortable handle;
• power;
• high moment;
• high speed.

Flaws:

• heavy;
• bad torque limiter.

TOP 5 best corded impact screwdrivers

Makita HP0300 box, 320 W

The Makita HP0300 impact drill has a 10 mm quick-release chuck, which allows you to instantly change accessories .
The drill operates in three special modes. Quick replacement of brushes is also provided, without additional tools. The corded drill/driver comes in a box with a bit. Equipped with a mechanical two-stage transmission.

High speed mode for fast drilling in light conditions . Low speed mode for heavy duty applications requiring high torque. Trigger speed control allows the user to match the speed to the application.

Equipped with a durable 10mm keyless drill chuck with double sleeve for easy installation and removal of bits . 2-mode mode for "Spin Only" or "Kick with Spin" for multiple applications.

Recessed lock button for continuous operation. The reversing switch is conveniently located.

Characteristics:

• screwdriver torque: 56 Nm;
• equipment weight: 1.3 kg;
• additional device options: protective locking of the operating button, speed control;
• model cartridge diameter: 1 – 10 mm;
• reverse option;
• quick-release chuck.

pros

ease of use;

reliability;

neat assembly.

Minuses

not identified by users.

Hammer DRL320 PREMIUM, 320 W

The Hammer DRL320 PREMIUM screwdriver is equipped with a two-speed gearbox .
It allows you to achieve high torque – 35 Nm. The model is suitable for various types of work.

It can be used for mounting and dismantling self-tapping screws, drilling holes in different materials . The tool copes with any task equally well. The screwdriver is equipped with a quick-release chuck. The clamp diameter ranges from 0.8 to 10 mm.

These parameters should be taken into account when selecting equipment.

The process of replacing bits and drills is simple and takes the user only a couple of seconds . The tool supports hammer drilling mode. Thanks to this, it is possible to increase the efficiency of the work performed. The equipment receives power from a regular outlet.

Characteristics:

• screwdriver torque: 35 Nm;
• additional device options: protective locking of the operating button, speed control;
• model chuck diameter: 10 mm;
• reverse option;
• quick-release chuck.

pros

ease of use;

power;

neat assembly.

Minuses

heating the case.

Elmos ESR913C, 910 W

The Elmos ESR913C electric drill/driver is very powerful, with a two-speed gearbox .
This screwdriver is quite convenient and practical for tightening screws. Its small dimensions, rubber handles, the presence of two replaceable bits, and an electronic speed control sensor made the impact drill quite versatile.

The model is equipped with a smooth speed regulator . This feature is very helpful when driving screws and precision drilling.

Using a torsion clutch, the torque of rotation is preset when working with screws . The speed switching function is carried out using a planetary gearbox.

The planetary gearbox consumes power economically, but at the same time has high output values. The self-clamping chuck will help you quickly change the nozzle without using additional tools.

Characteristics:

• drilling diameter (when working with wood): 40 mm;
• drilling diameter (when working with metal): 13 mm;
• equipment weight: 2.2 kg;
• additional device options: additional handle;
• drilling diameter (when working with concrete): 20 mm;
• reverse option;
• quick-release chuck.

pros

reliability;

ease of use;

neat assembly.

Minuses

heavy weight.

Tesla TDS320H, 320 V

The Tesla TDS320H two-speed drill/driver, 320 W, is characterized by high performance. It has a torque of 35 Nm, a rated power input of 320 W and a speed of 0 to 450 per minute.
At the second speed, the tool produces 1500 rpm . It has the functions “drilling” and “drilling with impact”. The main one is a quick-release chuck with a diameter of 1.5 – 10 mm, which saves time on changing equipment. The drill-driver provides drilling of materials of various nature.

When making holes on steel surfaces, their diameter can reach up to 10 mm, on wooden surfaces - up to 20 mm . For fastening work, screws with a diameter of up to 6 mm are used.

The tool is durable, reliable and has a long service life due to its ergonomic body. There is electronic speed control and a locking start button. Powered by household electricity.

Characteristics:

• screwdriver torque: 35 Nm;
• equipment weight: 1.5 kg;
• additional device options: protective locking of the operating button, speed control;
• reverse option;
• quick-release chuck.

pros

ease of use;

power;

neat assembly.

Minuses

not detected by buyers.

BULL ES 1401, 230 W

The BULL ES 1401 impact screwdriver is designed for serial tightening/unscrewing of screws, screws and self-tapping screws .
Maximum diameter of screws without pre-drilling: up to 6 mm; with pre-drilling: from 6 mm to 10 mm.

Maximum screw thread diameter: M12 . LED backlighting ensures comfortable work in conditions of poor visibility and insufficient illumination of the workplace. Quick replacement of brushes is provided.

Has a 4 m long power cable . The ergonomic handle has a soft grip for more comfortable and safe work.

Characteristics:

• screwdriver torque: 100 Nm;
• additional device options: use of bits without a chuck, backlight;
• reverse option;
• cartridge type: for bits;
• Idle speed: 3600 rpm.

pros

power;

ease of use;

reliability.

Minuses

not identified by buyers.

Rating of the best networked screwdrivers

TOP 5 best powerful networked screwdrivers

BISON ZSSh-300-2, 300 W

Using the ZUBR ZSSH-300-2 screwdriver, you can perform a variety of household tasks without problems .
You will be able to screw in and turn out fasteners and drill holes in various materials. Energy comes from a standard network.

The tool is optimal for prolonged use throughout the day . The screwdriver is connected using a 5-meter cable, which does not limit the user’s movement.

The torque can be 35 Nm. The screwdriver has 24 adjustment steps, they allow you to configure the basic parameters.

There are two speeds in total; at idle the speed reaches 1400 per minute . Keyless type chuck, quick-release. Thanks to this, you can quickly replace the elements with which the workflow is implemented. The clamp diameter is adjustable from 0.8 to 10 mm.

Characteristics:

• equipment weight: 1.6 kg;
• additional device options: protective locking of the operating button, speed control;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

neat assembly;

power;

ease of use.

Minuses

heavy weight.

VORTEX SSH-550/2 new, 550 W

The corded drill-screwdriver VIHR SSH-550/2 new will help you easily cope with unscrewing/twisting various fasteners, and will also be useful for drilling holes in wood, plastic and metal .
Several positions of the torque adjustment clutch allow screws of different sizes to be screwed in with equal quality.

A quick-release chuck allows you to instantly replace bits and drills, and a torque of 34 N*m with 19 levels of force gradation will help you choose the best option not only for fast but also safe work, without causing unnecessary damage to fragile materials.

Characteristics:

• screwdriver torque: 34 Nm;
• equipment weight: 1.2 kg;
• additional device options: backlight, protective locking of the operating button, speed control;
• model chuck diameter: 10 mm;
• reverse option;
• quick-release chuck.

pros

ease of use;

power;

neat assembly.

Minuses

short cord.

PATRIOT FS 300, 300 W

PATRIOT FS 300 is a reliable wired model for home use .
Its power is 300 W, thanks to which it easily drills wood and metal. Installing garden furniture, renovating floors, covering walls are some of the tasks she can handle. The torque can be adjusted using a convenient rotary switch, this will be useful for adjusting the device for working with dense materials, such as steel .

The device weighs only 1.2 kg, so your hands don’t get too tired from long-term use. Changing and installing drills does not take much time and effort, because the model has a quick-release chuck.

Characteristics:

• screwdriver torque: 35 Nm;
• equipment weight: 1.2 kg;
• model chuck diameter: 10 mm;
• reverse option;
• quick-release chuck;
• Idle speed: 1350 rpm.

pros

ease of use;

neat assembly;

power.

Minuses

short cord.

BISON ZSSH-300-2 K, 300 W

BISON ZSSH-300-2 K is a reliable model for professional and domestic use .
Its torque is 35 N*m, it can be adjusted and set to one of 23 positions. This can be used when working with dense materials, such as steel, to achieve a smoother operation.

The drill has a reverse function, it will help you get out a stuck drill or be able to quickly unscrew fasteners when dismantling an old cabinet.

The quick-release chuck allows you to avoid spending a lot of time changing attachments, into which you can install accessories ranging in size from 0.8 to 10 mm. This feature significantly expands the capabilities of the model.

Characteristics:

• screwdriver torque: 35 Nm;
• equipment weight: 1.6 kg;
• additional device options: protective locking of the operating button, speed control;
• reverse option;
• quick-release chuck.

pros

neat assembly;

reliability;

ease of use.

Minuses

heating the case.

STAVR DShS-10/450, 450 W

The STAVR DShS-10/450 drill-driver is used for drilling work in various materials and for screwing/unscrewing fasteners .
The quick-release chuck allows you to instantly change bits and drills.

The drilling mode and 20 stages of torque adjustment for processing materials of varying hardness provide a wide range of applications for this equipment.

The reverse option is designed to easily unscrew the drill from the material and unscrew the fasteners.

The switch lock reduces fatigue during long periods of operation. The two-speed gearbox makes it possible to select the optimal operating mode depending on the material.

Characteristics:

• screwdriver torque: 35 Nm;
• equipment weight: 1.4 kg;
• additional device options: protective locking of the operating button, speed control;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

power;

ease of use;

neat assembly.

Minuses

not specified by users.

Which screwdriver is the best?

Which screwdriver should you choose: corded or cordless? Which one is better and more powerful?

We must admit: corded screwdrivers are already an endangered species.
Every year there are fewer and fewer of them on sale. Famous brands have practically stopped producing them (except perhaps for Makita and Hyundai); only Chinese manufacturers remain. Therefore, those who work in manufacturing or construction have problems buying a good corded screwdriver that they can rely on. Only such “niche” devices as drywall screwdrivers are not inferior to their positions. In this segment, corded tools are still more in demand than their cordless counterparts. Technologies have now advanced so much that cordless screwdrivers are almost in no way inferior to corded ones. They are just as powerful, but more convenient due to the lack of wires. The only thing that is still not encouraging is the price of cordless tools.

Corded drills and screwdrivers Makita DF0300 from RUB 3,815. Makita HP0300 from 4,040 rub. Zubr DSh-M3-500-2 from RUR 2,737 Sturm Professional ID2145P from RUR 2,904 Zubr DSh-M1-400-2 from 2,385 rub. Interskol DSh-10/320E2 220.1.1.00 from 2,322 rub. Instar EDR 22650 from RUR 1,185 Interskol DSh-10/260E2 211.1.1.00 from 2,295 rub. Zubr ZSSh-300-2 from RUR 2,990 Zubr DSh-M3-500-2 K from 3,409 rub. Stavr DShS-10/450-2S from RUR 1,763 Zubr DSh-M1-400 from RUR 2,035 Sturm ID2145PT from RUR 3,495 Tesla TDS450H from RUR 4,790 Instar EDR 61650 from 1,010 rub. Hanskonner HID2145P from RUR 4,151 Pobeda DShS-475 from RUR 1,243 DEKO DKSD500W 063-4053 from RUR 1,193 Hammer Flex DRL400A from RUR 1,735 PIT PBM 10-C2 from 1,300 rub.

Which corded and cordless screwdriver should you choose? How powerful should it be so that it is enough for everything?

If a good drill must have a power of at least 500 - 750 W, then much more modest requirements are imposed on screwdrivers. In order to twist screws and self-tapping screws, a 300 W motor is almost always enough.

Manufacturers of cordless screwdrivers almost never indicate the actual power of their products. In the case of a battery-powered tool, it is better to talk about power classes that depend on the battery voltage. For example, in most cases we can confidently say that a screwdriver with an 18-volt battery is more powerful than a 12-volt one, and a 24-volt one has even more power. The question of the power of a cordless tool is discussed in more detail in the article “Which screwdriver is better: 12 V, 18 V or 24 V?”

In any case, whether it’s a corded screwdriver or a cordless one, it’s better to look not at the “power” column, but at the torque. It depends on him whether the tool can screw a large self-tapping screw into dense wood, or whether it can only do the “bugs” - small screws that fasten a thin metal profile. It is believed that a torque of 20 - 50 Nm is quite enough for a household screwdriver, and 75 - 100 Nm for a professional one. The highest torque is for screwdrivers with tangential impact; it can reach 150 - 200 Nm.

Cordless drills/drivers

Interskol DAU-13/18V 574.2.2.70 from 5,290 rub. Metabo PowerMaxx BS Basic 600080500 from RUR 5,375 DeWALT DCD701D2 from RUR 10,882 Metabo PowerMaxx BS 600079550 from RUR 5,399 Metabo PowerMaxx BS 600079500 from RUR 5,237 DeWALT DCD791D2 from RUR 17,621 DEKO DKCD20FU-Li 063-4103 from 3,360 rub. Makita DF333DWYE from 6,025 rub. Interskol DA-13/18VK 575.2.2.70 from 3,750 rub. Bosch GSR 12V-30 Professional 06019G9020 from RUR 7,294 Metabo BS 18 L BL 602326500 from RUR 11,690 Metabo BS 18 L 602321500 from RUR 9,299 Metabo PowerMaxx BS Quick Basic 600156950 from RUR 7,652 Metabo PowerMaxx BS Basic 600984000 from RUR 5,099 Metabo PowerMaxx BS Basic Set 600080880 from RUR 7,799 Interskol DA-12ER Promo 434.2.2.20 from 2,505 rub. Bosch GSR 18V-28 Professional 06019H4102 from RUR 10,859 Bosch GSR 18V-50 Professional 06019H5020 from RUR 11,945 Metabo PowerMaxx BS 12 601036500 from RUR 7,134 Makita DDF485RF from RUR 11,105

How to choose a good screwdriver for your home? What functions should a tool have for working in a home workshop?

The best screwdriver for the home is one that can not only turn fasteners, but also drill like a drill. Such tools are called drills and screwdrivers. They are usually equipped with quick-release chucks (which can accommodate both round drills and hex bits) and two-speed gearboxes (one speed for working with fasteners, the second for drilling). Thanks to the combination of the functions of a drill and a screwdriver, the combined tool almost completely covers the needs of the home craftsman.

When purchasing a cordless tool, you should pay attention to the presence of a battery and a charger in the kit (however, the battery and chargers for the tool can always be purchased separately). Small screwdrivers usually run on 12 V batteries. These tools are not very powerful, but they are lightweight and compact, making them better suited for small hobby projects. Larger devices have 18-volt batteries with a capacity of 2 – 4 Ah. Eighteen volts is now considered something of an "industry standard" in the world of cordless power tools. For a home workshop, it is better to buy a drill/driver complete with one or two batteries. Pay attention to the battery type. Lithium-ion batteries (Li-Ion) are considered the best, while nickel-cadmium (Ni-Cd) and nickel-metal hydride (Ni-Mh) batteries are already obsolete. We talked about the difference between them in detail in the article “Main types of rechargeable batteries”.

Drills and screwdrivers

Interskol DAU-13/18V 574.2.2.70 from 5,290 rub. Metabo PowerMaxx BS Basic 600080500 from RUR 5,375 DeWALT DCD701D2 from RUR 10,882 Metabo PowerMaxx BS 600079550 from RUR 5,399 Metabo PowerMaxx BS 600079500 from RUR 5,237 DeWALT DCD791D2 from RUR 17,621 DEKO DKCD20FU-Li 063-4103 from 3,360 rub. Makita DF333DWYE from 6,025 rub. Interskol DA-13/18VK 575.2.2.70 from 3,750 rub. Makita DF0300 from RUR 3,815 Bosch GSR 12V-30 Professional 06019G9020 from RUR 7,294 Metabo BS 18 L BL 602326500 from RUR 11,690 Metabo BS 18 L 602321500 from RUR 9,299 Metabo PowerMaxx BS Quick Basic 600156950 from RUR 7,652 Metabo PowerMaxx BS Basic 600984000 from RUR 5,099 Metabo PowerMaxx BS Basic Set 600080880 from RUR 7,799 Interskol DA-12ER Promo 434.2.2.20 from 2,505 rub. Bosch GSR 18V-28 Professional 06019H4102 from RUR 10,859 Bosch GSR 18V-50 Professional 06019H5020 from RUR 11,945 Metabo PowerMaxx BS 12 601036500 from RUR 7,134

In the catalog of drills and screwdrivers, you will notice that many tool models have additional functions and capabilities. For example, all drills and screwdrivers without exception have torque adjustment and reverse, and most of them have backlighting. Other options are less common. But they can be incredibly useful. For example, an additional handle, impact mode and depth limiter are essential if you plan to frequently drill into hard materials such as brick or foam concrete blocks. A case never hurts, because it is very convenient to store and carry a tool. Motor protection and safety clutch extend the life of the screwdriver. But functions such as display and synchronization with a smartphone look like “pampering”; they are unlikely to be useful to you while working in a home workshop.

How much does an average screwdriver cost?

“Medium screwdriver” is a very loose concept. As shown above, screwdrivers can differ greatly from each other. The price difference between corded and cordless devices is generally so large that the best corded screwdriver (the super popular Makita DF0300 with a price of about $70) costs less than one battery from a cordless one.

Among wireless models, there is also a wide range in prices, even within the same brand. The cost is influenced by the design of the tool and its configuration. For example, a small Makita DF330DWE screwdriver costs about $130, a more powerful Makita DDF343SHE model costs closer to $200, and a brushless Makita DDF485RFJ from the latest LXT line costs $300. And which of them can be called a “medium screwdriver”? All of them are neither budget Chinese nor “top” devices in their categories.

In general, we can say that among corded screwdrivers, the “average” ones are those that cost between $40 and $50. Devices from this price segment will not disappoint you with their quality if you are buying a tool for a home workshop. Battery models have a higher price. Here, “average” equipment is considered to be equipment that sells for $100–$200. This price segment includes the best models from “budget” brands with a good reputation and the simplest screwdrivers with nameplates of famous brands.

What is the difference between a brushless screwdriver and a brushed one?

Brushless motors are the most advanced version of electric motors found in hand tools. They appeared relatively recently, and so far they are only installed on “cool” screwdrivers. Brushless motors are better than conventional motors in almost every way. They are smaller, lighter, more powerful, more reliable and more efficient at using battery power.

The only thing holding back brushless motor screwdrivers from becoming more common is their price. For now, they are still much more expensive than tools with traditional brushed motors. Although professionals are gradually switching to brushless screwdrivers, buying them for home work is not always justified.

For a deeper dive into the world of modern brushless tools, we recommend reading the article “Brushless screwdrivers: why they are better than conventional ones.”

Brushless drills/drivers

Interskol DAU-13/18V 574.2.2.70 from 5,290 rub. DeWALT DCF887N from RUR 8,327 DeWALT DCD701D2 from RUR 10,882 DeWALT DCD791D2 from RUR 17,621 Interskol DA-13/18VK 575.2.2.70 from 3,750 rub. Bosch GSR 12V-30 Professional 06019G9020 from RUR 7,294 Metabo BS 18 L BL 602326500 from RUR 11,690 Bosch GSR 18V-50 Professional 06019H5020 from RUR 11,945 Makita DDF485RF from RUR 11,105 Metabo BS 18 L BL Q 602327500 from RUR 13,709 Elitech DA 18 UBL2 191608 from 6,390 rub. Makita DTD171Z from RUR 11,460 Interskol DAU-13/18V 574.4.1.70 from 6,354 rub. DeWALT DCD777D2T from RUR 13,301 Metabo BS 18 LT BL 602325550 from RUR 15,230 Interskol DAU-13/18VK 573.2.2.70 from 5,251 rub. DeWALT DCD791NT from RUR 9,853 Bosch GSR 18V-50 Professional 06019H5002 from RUR 5,704 DeWALT DCF801D2 from RUR 16,390 Makita DDF485Z from 6,190 rub.

Impact or non-impact: which screwdriver is better?

Not all screwdrivers have a mechanism that allows the tool to operate in impact mode. To be honest, it is not always needed, and many can do without it if they do not plan to drill into brick walls or tighten large “crackers”.

But those devices that have such a mode are worth considering in more detail. The fact is that impact mechanisms are different.

• Axial impact occurs in drills and screwdrivers. This is a simple mechanism by which the tool slightly “chips” the tip of the drill bit, allowing holes to be drilled faster and more confidently in durable materials such as brick or foam concrete.
• Tangential impact occurs only with “clean” screwdrivers and impact wrenches. Such mechanisms are called pulsed. Due to the tangential impact, they briefly increase the torque to very high values ​​(in the region of 150 - 200 Nm). This helps to tighten the fastener with very strong force.

Impact drills

Interskol DAU-13/18V 574.2.2.70 from 5,290 rub. DeWALT DCF887N from RUR 8,327 Makita HP0300 from 4,040 rub. Elitech DA 18 UBL2 191608 from 6,390 rub. Makita DTD171Z from RUR 11,460 Interskol DAU-13/18V 574.4.1.70 from 6,354 rub. Zubr GUL-255-41 from 7,789 rub. Interskol DAU-13/18VK 573.2.2.70 from 5,251 rub. Interskol DU-13/780ER 421.1.0.00 from 2,333 rub. DeWALT DCF801D2 from RUR 16,390 Makita TD110DZ from 3,800 rub. Vihr GS-1100 from RUR 5,150 Makita DTD152Z from RUR 4,929 DeWALT DCD996P2 from RUR 31,015 Interskol DAU-13/18VK 573.1.2.70 from 5,160 rub. Interskol DU-22/1200ERP2 330.1.0.00 from 5,482 rub. Bosch GDR 120-LI Professional 06019F0000 from RUR 3,853 Bosch GSB 12V-30 Professional 06019G9120 from 8,400 rub. DeWALT DCF894N from RUR 16,281 Bosch GSB 120-LI Professional 06019G8100 from RUR 5,720

How to choose a screwdriver for working on metal, brick, wood?

We buy different drills for working on metal, wood and concrete because we understand that these materials have different characteristics. You need to approach the choice of a drill-driver in approximately the same way. If you plan to drill metal, then buy a tool that, even under load, can maintain a chuck rotation speed of around 1000 rpm. Even simple and not very powerful drills and screwdrivers are suitable for working with wood (but if feather drills or large crowns are used, a lot of torque will be required). And for drilling brick and concrete, the fundamental issues are the presence of an impact mode, the ability to install an additional handle, as well as the efficiency of engine cooling and the quality of protection of the tool from getting abrasive chips inside the body.

Which brand of screwdrivers is better: Bosch, Makita or Metabo?

There aren't many big names in the world of power tools, and they're all household names. The best screwdrivers are produced by DeWALT, Metabo, Makita, AEG and Bosch (we are talking about the “blue” series). They all have an excellent reputation and provide a good guarantee on their products. The instruments of these brands are considered professional or semi-professional.

Among other companies, manufacturers such as Festool and Milwaukee deserve attention. They are widely known all over the world, but their products are not very common on our market.

We will not campaign in favor of this or that brand. The companies listed above are at approximately the same technological level and top the ratings in all reviews. When choosing a cordless screwdriver, you should take into account the compatibility of its battery with batteries for tools that you already have at your disposal or that you plan to buy in the future. Therefore, setting up a “zoo” of tools of different brands and systems in the workshop is not entirely appropriate.

Which brand of screwdriver is best to buy for your home?

For weekend work in a home workshop, it is not advisable to buy a professional tool; it is better to take a household screwdriver from the middle price category. He will not “eat up” the family budget, but at the same time he will be a reliable and faithful “helper”.

Companies that produce good household-grade screwdrivers include Ryobi, Bosch (“green” series), Hitachi, Black & Decker and Stanley. You can also pay attention to the inexpensive “red” Makita (aka Maktec) or products from Hyundai, Einhell and Yato. All of the listed manufacturers have service centers in our country, and spare parts, components and accessories for screwdrivers of these brands can be purchased freely and inexpensively.

The products of these brands are called “household tools” because they are designed for less intensive use than professional screwdrivers. The difference is that household tools use simpler (and less expensive) parts: motors, bearings, seals, gears, electronic components, etc.

How to distinguish a real Makita or Bosch screwdriver from a fake?

For a non-specialist, it is quite difficult, almost impossible, to distinguish a real branded power tool from a high-quality fake. Swindlers and “pirates” have long learned not to make mistakes in the Bosch, DeWALT and Makita inscriptions and not to completely hack things. The difference between the original and the fake, as a rule, becomes obvious only during operation, when the “plasticine” gears begin to “crumble,” weak bearings overheat and jam, and motors with windings made of low-quality copper burn under load.

Therefore, the only sure way to avoid running into a fake is not to buy tools at construction markets and in underground passages. It is better to order it from large and well-known online stores that work directly with manufacturers or importers. In this case, you will have an official guarantee and confidence that you will be refunded for a defective product.

Is there any reliability rating by which I can choose a screwdriver?

In our catalog, the rating of screwdrivers is formed automatically based on user interests. In it you can see which brands and models are in greatest demand, as well as which features and configurations are of interest to buyers. Reviews of screwdrivers left by real users who bought the tool allow you to form your own opinion about the reliability of a particular device and learn more about its advantages and disadvantages. Users leave the most favorable reviews about screwdrivers from professional tool lines, because they have a long service life, good maintainability, an official warranty (usually from 3 to 5 years), and spare parts for them are easy to obtain.

So which screwdriver is better?

Alas, there is hardly a clear answer to the question asked in the title of the article. It is impossible to choose just one screwdriver, because each of them has its own advantages and weaknesses. Some models win in power and torque, others in battery life, and others in price. The choice depends on the purpose, volume of work and your preferences. You can read articles and reviews describing the TOP 5 screwdrivers in different categories and “nominations” in the corresponding section of the site.

If you prefer video rather than text, then watch our video on how to choose the right screwdriver.

TOP 5 best inexpensive corded screwdrivers

Instar EDR 21650, 650 W

The ergonomic rubberized body of the Instar EDR 21650 contributes to the comfortable work of the master with reliable fixation of the tool in the hand .
The quick-release chuck simplifies the process of changing accessories.

The reverse function is intended for tightening and unscrewing self-tapping screws..

Electronic speed control allows you to select the required speed mode.

Fixing the start button makes it possible not to press the button during continuous operation.

Quick access to the brushes will allow you to quickly replace them, and illumination of the work area will help you work in dimly lit areas.

Characteristics:

• additional device options: protective locking of the operating button, speed control;
• model chuck diameter: 10 mm;
• reverse option;
• Idle speed: 750 rpm.

pros

neat assembly;

reliability;

ease of use.

Minuses

low backlight quality.

Wert EDS 280RE, 280 W

Wert EDS 280RE – compact household drill-driver .
Engine power – 280 W. Maximum torque – 20 Nm. The tool can drill a hole with a diameter of up to 20 mm in wood and up to 8 mm in metal. Powered by network. Chuck type – quick-release. The equipment can be changed with one movement of the hand without additional tools.

20 torque levels will allow you to select the optimal mode for fasteners of different diameters . The number of revolutions is smoothly regulated by pressing the “start” button.

It is convenient to configure the tool to work with materials of different densities . Reverse changes the direction of rotation. Useful for unscrewing fasteners. The textured ergonomic handle fits comfortably in the hand.

Characteristics:

• screwdriver torque: 20 Nm;
• equipment weight: 1.34 kg;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• Idle speed: 880 rpm.

pros

ease of use;

reliability;

neat assembly.

Minuses

heating the case.

CALIBER DE-550SHM, 550 W

The hammerless drill-driver CALIBR DE-550ShM consumes resources from the electrical network .
24 torque levels are available. The tool is optimal not only for working with fasteners, but also for drilling holes. The maximum drilling diameters for wood and metal are 20 and 10 mm, respectively.

The device is equipped with a quick-release chuck, the installation of which does not require additional tools . The minimum clamp diameter is 0.8 mm, and the maximum is 10 mm.

The kit includes detailed operating instructions . The model comes in a box containing information about the main advantages of the equipment, as well as its technical parameters.

Characteristics:

• equipment weight: 1.3 kg;
• additional device options: protective locking of the operating button, speed control;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

neat assembly;

ease of use;

reliability.

Minuses

heating the case.

STAVR DShS-10/300, 300 W

The STAVR DShS-10/300 corded drill-driver will be useful to the amateur craftsman .
With its help you can make small repairs, hang a shelf or assemble furniture. It operates in two speed modes, and the torque is easily adjusted according to the hardness of the material in which holes need to be drilled.

The tool is equipped with a quick-release chuck . Thanks to this, you will only need a few seconds to replace the working equipment without using a special wrench.

The rubberized ergonomic handle fits well in the palm of your hand, the power button, if necessary, is fixed pressed for long-term continuous operation, and the 3-meter power cord allows you to perform work not only close to the outlet.

Characteristics:

• screwdriver torque: 14 Nm;
• equipment weight: 1.3 kg;
• model cartridge diameter: 0.8 – 10 mm;
• reverse option;
• quick-release chuck.

pros

neat assembly;

reliability;

ease of use.

Minuses

weak power.

Interskol DSh-10/250E, 250 W

The budget drill-driver Interskol DSh-10/250E will be the optimal choice for a home craftsman .
The power consumption declared by the manufacturer is 250 W. Torque - 25 N*m. This is a single-speed option, the maximum number of revolutions is 800 per minute.

The number of torque stages is 20+1 . A normal drilling function is provided. The main chuck here is a quick-release chuck.

When drilling steel with a drill-driver, the maximum hole diameter can be 10 mm. If we are talking about wood, then it is 20 mm.

The maximum diameter of screws should not exceed 6 mm . The model is powered from an electrical network; a battery is not provided. There is a planetary gearbox, which increases the transmitted torque, but helps to reduce the size of the tool.

Characteristics:

• screwdriver torque: 25 Nm;
• equipment weight: 1.3 kg;
• additional device options: protective locking of the operating button, speed control;
• reverse option;
• Idle speed: 800 rpm.

pros

ease of use;

power;

neat assembly.

Minuses

not allocated by buyers.

Inexpensive products

6. Interskol DSh-10/260E

This is one of the cheapest models in our review, however, it is characterized by decent workmanship; it can be used both as a screwdriver and for drilling various materials that are not particularly durable. For example, it is unlikely that it will be possible to drill through thick steel using this device. The length of the wire is 2 meters - quite enough for indoor work, and it is not always necessary to use an extension cord. The design provides a special handle for switching speeds - it is two-position. The first position is designed for tightening screws, the second is made for switching to drilling mode.

The weight of the device is not very large - only 1.5 kg, so it is very convenient and easy to hold in your hand for a long time. The ergonomics are carefully thought out - the product is suitable for both people with large palms and those with short fingers. Bits and drills are installed in the chuck quickly, replacing them takes a minimum amount of time. When operating in the screw tightening mode, the initial rotation speed of the chuck is not very high, and then the device accelerates to 450 rpm. The cartridge stops quickly enough, the risk of injury is low. The body is made of reliable, highly durable plastic; there are rubberized inserts that give the product additional attractiveness.

More: Top 10 best bathroom sinks

Advantages:

• Very easy to use;
• Low weight of the device;
• Carefully thought out security system;
• The electric motor starts at low speeds first.

Flaws:

• There is not much power for drilling brick or steel;
• The largest diameter of a drill or bit is 10 mm.

Interskol DSh-10/260E

HAMMER DRL400A

The design is optimal for minor household work. The length of the power cable is 2 meters. It is positioned as a device that performs the functions of a hammerless drill, but during testing we tried to drill a 40 mm board with a 25 mm stylus - the product coped with this task with difficulty. The device weighs a little and has compact overall dimensions. It shows its useful qualities best when working with fasteners that are not too large. The engine here is not very powerful - only 280 W. It creates a torque of about 22 Nm, and at idle it develops up to 750 rpm - not very suitable for drilling, but for tightening screws and other products this parameter will be sufficient. The speed control system is electronic, reverse rotation is provided, there is only one speed mode, but it is adjustable.

The design has a quick-release chuck; the maximum diameter of the inserted drill is 10 mm. Almost no time or effort is wasted when replacing attachments. The cartridge carefully fixes them, reducing the likelihood of injury to zero. The case is made of special impact-resistant plastic; there are rubber inserts that do not allow the device to slip in the palms.

Advantages:

• The cartridge has a high level of strength;
• Insignificant mass;
• Quite reasonable cost;
• The torque control clutch is very sensitive;
• If necessary, you can repair it yourself;
• Sturdy gearbox.

Flaws:

• Doesn't take lateral loads very well;
• Some users have questions regarding the build quality.

HAMMER DRL400A

CALIBER DE-550SHM

A relatively powerful device that can work as a drill with wood, metal, plastics, and so on. The power of the device is in the middle range and amounts to 550 W. It is not suitable for working with thick metal products, but for corrugated sheets or wood it will be optimal. At idle, the device can reach speeds of up to 750 rpm. With this screwdriver you can drill a hole in wood up to 20 mm in diameter and up to 10 mm in metal. The design is equipped with a quick-release chuck where you can install drills or bits with a diameter of up to 10 mm. The screwdriver weighs just over 2 kg, so it is comfortable to hold in your hand for a long time. The placement of the buttons is carefully thought out.

The trigger is locked, so the device is reliably protected from accidental starting, which, in turn, increases the safety of work. The torque is adjusted in steps - in one of 23 positions, which are fixed with a characteristic click. There is only one drilling mode; when using it, you will not be able to change the number of revolutions.

Advantages:

• You can work with any materials;
• For its price it has decent power indicators;
• Good build quality;
• Fits comfortably in the hand;
• Long power cable.

Flaws:

• Heats up quickly enough with active use;
• All drills and bits must be purchased separately.

CALIBER DE-550SHM

BISON ZSSh-300-2 K

One of the main distinguishing features of this tool is its very long warranty period, which is as much as 5 years. The length of the power cord is also impressive - more than 4 meters, so you will rarely have to resort to extension cords. It's a decent weight, so you won't be able to hold it in your hand for a long time, but it works much more efficiently than lightweight models. And this is taking into account that manufacturers sought to reduce the weight of the equipment as much as possible - many metal parts were replaced with plastic ones, and a lightweight starter and rotor were installed in the design. The motor here is brushed, but the motor brushes can be replaced very quickly - you don’t even have to disassemble the entire housing.

The power of this domestically produced product is 300 W - not too much, but quite normal for domestic use. There are two modes of operation - drilling and screwing. In the first case, the number of revolutions at idle can reach 1400 per minute, in the second it does not exceed 400. The maximum torque is 35 Nm. The ratchet is equipped with 23 speed modes. The manufacturer has installed a quick-release chuck here that is capable of working with bits and drills with a diameter of up to 10 mm.

Advantages:

• Fits comfortably in the hand, despite its significant weight;
• Quite acceptable indicators of power, torque, number of revolutions;
• Good build;
• Long product power cable;
• Ability to work with many materials.

Flaws:

• The device does not include a case for storing and transporting the product.

BISON ZSSh-300-2 K

2. Interskol DSh-10/320E2

The manufacturer positions this product as semi-professional. Indeed, the capabilities of this screwdriver are quite sufficient for active use. With its help you can perform absolutely any drilling and screwing work. The product easily replaces battery-powered similar models. The model has a rubberized handle, so it will not slip out of your hands under any conditions. The weight of the product is a little more than 2 kg, but this moment has practically no effect on the comfort of use. It works quite noisily, but you can get used to it quite quickly. Users note the high build quality of the device - no cracks or gaps were found, and no extraneous creaks were detected either. The product is equipped with quick-release brushes, so they can be replaced in a matter of minutes.

More: Top 10 latex paints

The tightening speed here is very high, so when working with small screws you will need to be as careful as possible; if you set the speed too high, the screw head will simply rip off. The power consumption of the product is 320 W. The length of the product cord is about 2 meters. The cartridge is not equipped with a special braking system, so it will rotate for a long time by inertia. The ergonomics of the reverse button and trigger are thought out very carefully, so the device is easy to use regardless of the size of your palms. The decent power of the product allows you to drill holes in wood with a diameter of up to 25 mm.

Advantages:

• Excellent build quality;
• High power level;
• Reliability and durability of the device;
• The gears of the gearbox are made of high-strength metal.

Flaws:

• The cartridge is not equipped with a braking system;
• The kit does not include a case for storing the tool.

Interskol DSh-10/320E2

STURM! ID2145P

The first full-fledged professional model in our review, it is characterized by its low weight and easy handling, which makes it most suitable for performing a number of very wide-profile tasks. The power of the installed electric motor is quite enough to work with any materials, from wood and plastic to rolled metal. The products were manufactured using HighTorqueTechnology technology, thanks to which, when heavy loads are applied to the device, the torque doubles. This makes the device almost the most powerful among relatively cheap networked screwdrivers. The torque adjustment is 23 levels, and switching between them is stepwise. The model contains a switchable two-speed gearbox, which provides not only fast tightening of screws or self-tapping screws, but also a decent drilling speed. The speed control here is electronic.

Manufacturers have provided a soft start system that instantly stops all moving parts. The design features wear-resistant bearings. The gears of the gearbox are equipped with surface hardening, the rotor is reinforced. All these elements allow us to guarantee a long period of operation of this device. The case is lightweight, able to withstand serious impacts, and can withstand low temperatures. The handle has a soft grip; the bulk of the mass is concentrated in the area of ​​the handle, which allows you to use the device without straining your fingers.

Advantages:

• A long power cable, which is placed in a soft braid that will not become stiff in the cold;
• Fits comfortably in the hand despite its considerable weight;
• Weight distribution is optimal;
• Perfect for working with absolutely any materials.

Flaws:

• Not too much torque for a professional tool.

STURM! ID2145P

Which screwdriver is better, corded or cordless?

According to the type of power supply, screwdrivers are divided into 2 groups:

• Network . They operate from a 220 V network and do not require charging batteries. They are cheaper than battery-powered models. Their movement is limited by the cable, cannot be used in wet areas, and are heavy.
• Rechargeable . Compact models for hard-to-reach areas. Powered by removable batteries. Optimal for rooms with high humidity and situations where it is not possible to use the power grid. The disadvantages of such a tool are discharging batteries and a higher price.

For regular professional work, it is better to buy a model with a network cable . And for occasional housework, a battery-powered one is more suitable.

Which is better - a corded or cordless screwdriver?

As already mentioned, a cordless screwdriver is also suitable for home tools - in case, for example, you need to quickly screw on a shelf and make holes in a child’s wooden craft for kindergarten.

For large jobs, a corded screwdriver will be a winner . Modern models have a long cord, making even working from the network comfortable.

At the same time, when performing certain actions with the tool (assembling furniture, for example), you do not need to be distracted by replacing the battery and charging a dead one.

Thus, in this matter one should proceed solely from the purposes for using the power tool and personal preferences.

Which company should you choose?

Different manufacturers offer screwdrivers that differ in characteristics, functionality and price. This variety makes it difficult for beginners to choose.

However, it is still possible to highlight companies that are especially popular among buyers in 2021:

• Bosch is a famous German brand. The company presents a wide range of screwdrivers: there are cordless and corded models, varying in power and functionality.
• Interskol is a Russian brand, one of the ten largest companies producing power tools. The quality is quite high, and the price is significantly lower than for foreign analogues;
• Makita is a Japanese company that produces both standard household screwdrivers and professional devices with an impact function and the ability to carry out 3200 revolutions/minute.
• Metabo is a German company that has long established itself in the power tool market. Its range includes cordless and corded screwdrivers.

The best corded drills and screwdrivers - which company to choose

The leaders were predominantly manufacturers from Russia, operating in the budget, medium and expensive price ranges. Of the foreign companies, only two Japanese representatives competed with them.

The list of reliable brands includes:

• Diold is a Russian trademark under which power tools are created. All developments belong to domestic engineers, and assembly is carried out mainly in China. The products of this brand were first released in 1992; they have certificates of conformity from the State Standard of Russia.
• Stavr is a Russian company that creates power tools specifically for the needs of the Russian market and other CIS countries. The emphasis is on the increased service life of products, which allows them to serve effectively and for a long time.
• Zubr is a fairly popular and large Russian brand with its own factories, laboratories, warehouses and stores. The company has a good quality service, which reduces the likelihood of equipment failure.
• Hitachi is a Japanese conglomerate founded in 1910. The company introduced power tools to its product range back in 1957. Until now, it holds the leading position in the world in its sales.
• Interskol is another Russian company producing power tools, which differs from its competitors in its low percentage of product returns under warranty, cooperation with the best European factories in its field and a developed network of service centers.
• Makita is the second Japanese manufacturer of electric and gas powered tools, operating since 1935. The main sales market is in Western Europe, but products are also in demand in Eastern Europe.

See also: Rating of geysers: TOP 12 best models in terms of reliability and quality

The best models in terms of price/quality ratio

Below you can see the rating of the best electric screwdrivers - from inexpensive to premium ones with extensive functionality.

Screwdriver Makita FS4000JX2, 570 W

The most popular budget corded screwdriver. Suitable not only for home use, but also in furniture production. Locking the power button, adjusting the rotation speed .

cartridge without bits;

reverse;

cable length 2.5 m;

power 570 W.

Prices in online stores

Drill-driver RedVerg SD300, 300 W

High-quality assembly, fits comfortably in the hand, ergonomic handle. Inexpensive, but powerful and reliable option . There is a rotation speed adjustment.

low price;

2 operating speeds;

reverse, drilling;

quick-release chuck.

Prices in online stores

Drill-driver BISON DSH-M1-400 box, 400 W

Easy to use, attractive design, decent quality. The torque indicator allows the tool to be used in a professional environment. Extensive functionality, quick-release chuck .

spotlight lamp;

box;

bit holder;

waist brace.

Prices in online stores

Screwdriver RESANTA SSH-550-1, 550 W

Powerful, reliable , works from the network. Comfortable to hold and easy to adjust the tightening force. Electronic speed control increases operating comfort, rubberized handle. There is enough power to solve all household problems.

metal drilling;

reverse;

quick-release chuck.

Prices in online stores

Drill-driver Interskol DSh-10/250E, 250 W

Cheap, light and compact tool . An ideal solution for minor household repairs. The power is enough to work with thin sheet iron. Design, assembly, easy to maintain.

cable length 2m;

power 250 W;

drilling, reverse;

fixing the power button.

Prices in online stores

Drill driver Hammer DRL400A, 280 W

Powerful, durable cartridge, reliable, robust gearbox. High torque, light weight , low price. Sensitive torque control clutch (ratchet), high maintainability.

quick-release chuck;

power 280 W;

cable length 3 m.

Prices in online stores

Drill/driver Makita DF0300, box, 320 W

High-quality assembly, powerful, does not heat up during operation . The best corded drill and screwdriver according to user reviews. Reliable switching of speeds and reverse, electronic speed control.

cable 2.5 m;

drilling;

extra bits.

Prices in online stores

Drill-driver BISON ZSSH-300-2, 300 W

Small dimensions, power supply 220 V. Quick replacement of commutator brushes, adjustable spindle speed. Keyless chuck with a diameter of 10 mm , locking the power button.

power 300 W;

cord 5 m;

bit holder;

reverse

Prices in online stores

Drill-driver BISON DSH-M3-500-2 box, 500 W

Sufficient torque for operation. The long cord allows you to reach any point on the job site. Elegant design, comfortable ergonomics.

flashlight;

access to brushes;

bit holder;

wire 5 m;

box.

Prices in online stores

Drill-driver Bort BSM-250×2, 280 W

High-quality plastic, lightweight, convenient and compact tool. One of the top popular corded screwdrivers. Non-locking mode, does not require much storage space. Torque 16 Nm , mains powered.

quick-release chuck;

power 280 W;

2 operating speeds.

Prices in online stores