TOP 16 best pumps for wells: 2021 rating by price/quality and which deep pump to choose

In many private houses remote from the central water supply system, water is supplied from wells on the site. In order to always have clean and fresh water in the house with sufficient pressure, many people use submersible well pumps. But how to choose such a device?

Are there any recommendations for choosing which models should be considered at the very beginning of the search?

To answer these questions, we have compiled our own rating of well pumps from well-known and trusted manufacturers.

When selecting models in terms of price/quality ratio, technical characteristics, customer reviews and expert opinions were taken into account.

Rating of the TOP 16 best pumps for wells 2020-2021

Place	Name	Price
TOP 4 best well pumps by price, quality and reliability for 2021
1	Aquarius BCPE 0.5-50U	Find out the price
2	Aquarius BCPE 0.5-32U (820 W)	Find out the price
3	Aquario ASP 1E-100-75 (1250 W)	Find out the price
4	Grundfos MQ 3-35 (850 W)	Find out the price
TOP 3 best inexpensive well pumps
1	Aquarius BCPE 0.32-40U	Find out the price
2	UNIPUMP ECO 0 (370 W)	Find out the price
3	Aquarius BCPE 0.5-16U	Find out the price
TOP 3 best pumps for a well 40 m deep
1	Aquario ASP 1E-55-75 (700 W)	Find out the price
2	Aquario ASP 1.5C-60-75 (920 W)	Find out the price
3	VORTEX CH-60 (800 W)	Find out the price
TOP 3 best pumps for a well 25-30 m deep
1	GILEKS Water cannon PROF 55/50 (600 W)	Find out the price
2	GILEKS Water cannon PROF 110/110 (1800 W)	Find out the price
3	GILEKS Water cannon PROF 55/75 (900 W)	Find out the price
TOP 3 best pumps for a well 15-20 m deep
1	BELAMOS 3SP 60/1.8 (600 W)	Find out the price
2	UNIPUMP ECO 2 (750 W)	Find out the price
3	DELTA NP2-55/60 (900 W)	Find out the price

How to choose a well pump?

When purchasing a pump for a well, attention is primarily paid to the following parameters:

Water purity . There are models that are installed only in clean sources, and there are pumps equipped with additional filters for muddy wells or sandy wells.
Productivity . Reflected in the number of cubic meters of water pumped per hour. They should be enough for all household needs. It also allows you to find out how many points can be connected to one well.
Depth . Here, start from the depth of your well.
Pressure (maximum) . An indicator of the height at which water will rise from a source. Be sure to consider the distance of the well from the water supply point.
Protection . This includes protection against overheating and overload, provided by a thermostat. If necessary, dry-running protection can be installed independently using a float switch.

TOP 4 best well pumps by price, quality and reliability for 2021

Aquarius BCPE 0.5-50U

One of the most reliable submersible models for placement in wells up to thirty meters deep.

The manufacturer claims that the service life is 6 years, but users indicate that the pump can operate for 10 years. It is also a universal device that can be used to organize an automatic water supply system, installation in drinking wells and springs, as well as household tanks.

The pump provides up to 30 liters per minute or 3.6 cubic meters per hour . At the same time, 1.1 kW of energy is consumed, and the operation of the device is almost silent.

The winding has a built-in thermal relay that protects the motor from overheating.

If the relay is triggered, the system automatically stops and is activated only after the temperature drops.

The kit does not include protection against dry running, but the device can be installed separately so that there is no need to monitor the water level in the well. The pump is equipped with a cable and a cable, each 50 meters long.

Main characteristics:

Pressure (max), m - 75.
Throughput, cubic meters m/hour - 3.6.
Power, W - 1140.
Water temperature, °C - 35.
Weight, kg - 16.3.

pros

reliable device;
versatility of use;
low noise level;
high performance;
reliable overload protection.

Minuses

not detected.

Aquarius BCPE 0.5-32U (820 W)

Thanks to the production of the housing and internal structure of this model from environmentally friendly materials, the pump can be used in sources with clean drinking water.

The device is equipped with a fine filter, so it cannot be placed in muddy or sandy wells.

The pump dives to a depth of 10 meters, pumping about 3.6 cubic meters per hour thanks to an 820 W motor.

In this case, the maximum pressure is 47 meters. This pressure allows you to provide the house with water not only for drinking needs, but also for supplying household appliances, various household needs and watering the garden/garden.

The main body is made of stainless steel, and some motor elements are made of brass and durable food-grade plastic, so the pump will last a long time and will not cause trouble with frequent breakdowns.

By the way, the device is completely repairable. The thermal relay protects the engine from overheating; the kit includes a remote control.

Main characteristics:

Pressure (max), m - 47.
Throughput, cubic meters m/hour - 3.6.
Power, W - 820.
Water temperature, °C - 35.
Weight, kg - 11.7.

pros

good performance indicators;
environmentally friendly materials, suitable for drinking water;
there is a remote control;
cable 32 meters;
good pressure.

Minuses

not suitable for deep wells;
no dry running protection.

Aquario ASP 1E-100-75 (1250 W)

Well pump, designed for immersion to a depth of up to 50 meters with a maximum pressure of up to 100 meters and pumping 3 cubic meters per hour.

By the way, the pump can carry out up to 30 starts per hour. The pump is suitable for use only with clean water, does not tolerate high levels of sand particles and can become clogged, which will then lead to failure.

The oil used in the engine belongs to the class of white medicinal oils, is completely safe for the body and is suitable for drinking water.

There is protection against overheating; the engine is cooled by a stream of water that passes through it during operation.

There is a built-in capacitor and thermostat that turns off the device if it overheats.

The package includes a long, 60-meter network cable to connect to a power source without using an extension cord.

Main characteristics:

Immersion depth - 50.
Pressure (max), m - 100.
Throughput, cubic meters m/hour - 3.
Power, W - 1250.
Water temperature, °C - 35.

pros

suitable for deep wells;
there is protection against overheating;
long power cord;
long service life.

Minuses

not detected.

Grundfos MQ 3-35 (850 W)

This model belongs to the surface models of pumping stations . Engine power in

The best pumps for wells up to 10 meters

Grundfos SBA 3-35 A

Submersible pump for creating a water supply system in the country and in a country house . Used to collect clean water from a well and storage tank up to 10 meters deep.

Equipped with built-in controls, including a flow sensor and an overheating protection system.

The mesh filter prevents impurities from entering the liquid . The device is connected to a 220/230 V network. High-quality automation provides a throughput of 3 cubic meters. m per hour.

Characteristics:

immersion depth - 10 m;
maximum head - 35 m;
throughput - 3 cubic meters. m/h;
power consumption - 800 W;
cable length - 15 m;
dimensions - 15×52.8 cm;
weight - 10 kg;
noise level - 50 dB.

Advantages:

high-quality assembly;
compact;
practically no noise;
all automation in a single housing.

Flaws:

high price;
You have to close it to prevent rodents from getting in.

Aquario ASP-25-100WA (620 W)

Submersible pumping station for wells from 15 cm, wells and reservoirs . Connects to a 220 V network. Used for collecting water at temperatures up to + 35C.

A high-quality filter ensures that the sand content in the water is no more than 180 grams/m3.

The case is made of stainless steel, resistant to mechanical damage . Due to the throughput of 3 cubic meters. m/hour ensures uninterrupted water supply.

Characteristics:

immersion depth - 15 m;
maximum head - 40 m;
throughput - 3 cubic meters. m/h;
power consumption - 620 W;
cable length - 15 m;
dimensions - 15×52.8 cm;
weight - 10 kg.

Advantages:

automatic operation;
practically no noise;
high performance;
absence of impurities in water.

Flaws:

unreliable loop for hanging the pump;
short cable.

DAB DIVERTRON 1200 M (1100 W)

Installation for individual and collective water supply systems . Water is pumped without solid particles. The body, diffusers and impellers are made of technopolymer, and the fastening elements are made of stainless steel.

This ensures a long service life of the unit. The pump is designed for immersion to depths of up to 12 m.

Water intake with temperatures from 0 to 35 degrees is allowed.

The overload protection system prevents pump damage.

Characteristics:

immersion depth - 12 m;
maximum head - 46 m;
throughput - 5.7 cubic meters. m/h;
power consumption - 1100 W;
cable length - 15 m;
dimensions - 15x45 cm;
weight - 11 kg.

Advantages:

built-in hydraulic accumulator;
easy installation;
low noise level;
can be left in the well for the winter.

Flaws:

rapid engine wear;
high price.

GARDENA 5500-3 Classic

The device is suitable for diving to a depth of 12 meters . Due to the high power of the motor, an uninterrupted supply of water with a throughput capacity of 5.5 cubic meters is ensured. m/hour.

The pump consumes only 900 W.

It is possible to connect to a 220 V and 230 V network using a 15-meter cable . Robust design and fasteners guarantee long-term operation of the unit.

Characteristics:

immersion depth - 12 m;
maximum pressure - 30 m;
throughput - 5.5 cubic meters. m/h;
power consumption - 900 W;
cable length - 15 m;
dimensions - 14.9×47.5 cm;
weight - 9.6 kg.

Advantages:

good water pressure;
high-quality assembly;
practically no noise;
works without interruption.

Flaws:

high price;
rapid wear of the engine starter.

UNIPUMP ECO FLOAT-3

The submersible pump is suitable for use in conjunction with irrigation systems and sprinklers . It features high power and low noise levels.

Made from durable materials to ensure trouble-free operation of the device.

Suitable for diving to depths of up to 20 m . Equipped with an overload protection system. Due to the high power it supplies up to 5.1 cubic meters. m of water per hour at a maximum pressure of 49 m.

Supplied with a 20-meter cable for connecting to a 220 V and 230 V network.

Characteristics:

immersion depth - 20 m;
maximum head - 49 m;
throughput - 5.1 cubic meters. m/h;
power consumption - 480 W;
cable length - 20 m;
dimensions - 9.84×63.5 cm;
weight - 9.6 kg.

Advantages:

high performance;
the pressure corresponds to the declared one;
Suitable for deep diving;
high-quality assembly.

Flaws:

high price;
designed to work intermittently.

TOP 3 best inexpensive well pumps

Aquarius BCPE 0.32-40U

As a budget model for a summer residence, you can use this model from a well-known brand with a 680 W motor.

When properly connected, a pressure of 60 meters is provided, and about 3 cubic meters of clean water is pumped per hour.

Such a pump is suitable for creating an automated water supply system (with the additional installation of a check valve) and for watering or irrigating a garden.

The pump is not afraid of voltage surges and provides constantly good water pressure . However, if there are constant problems with the electricity supply, it is better to take care of installing a stabilizer in advance.

The device is equipped with a network cable, the length of which is 40 meters, which eliminates the need to use an extension cord.

There is overheating protection provided by the built-in thermostat.

Main characteristics:

Pressure (max), m - 60.
Throughput, cubic meters m/hour - 3.
Power, W - 680.
Water temperature, °C - 35.
Weight, kg - 12.2.

pros

budget price;
long cable;
good performance.

Minuses

no dry running protection.

UNIPUMP ECO 0 (370 W)

Another budget pump model for wells with a diameter of 10 cm or more . Differs in small

energy consumption and good performance indicators - in an hour the pump is capable of pumping up to 4.8 cubic meters of clean water, the temperature of which should not exceed 35 degrees.

The pump has a vertical installation principle, the body is made of corrosion-resistant stainless steel, which means the pump will work for many years.

The internal mechanism is assembled from environmentally friendly materials, so you can not be afraid to use this device for working with drinking water.

The immersion depth is 20 meters, installation and use are as simple as possible, and the pump does not make noise during operation. There is a smooth engine start and overheating protection.

Main characteristics:

Pressure (max), m - 35.
Throughput, cubic meters m/hour - 4.8.
Power, W - 370.
Water temperature, °C - 35.
Weight, kg - 11.5.

pros

good performance indicators;
reliable design;
economical energy consumption.

Minuses

short cord - 10 meters;
only for clean water (no more than 100 g of impurities per cubic meter)

Aquarius BCPE 0.5-16U

This is the smallest model in the Aquarius line, which does not in any way affect the performance of the pump.

The 400 W motor pumps up to 3.6 cubic meters with a maximum head of 27 meters.

The device is used in wells with a diameter of 11 cm or more with clean water, where the content of impurities is minimal.

The engine starts smoothly, with gradual acceleration, there is protection against overheating - a thermal relay will stop the system when a critical temperature is reached.

The pump has a low noise level during operation.

Like all centrifugal pumps, it does not create vibrations, does not silt up the well and does not cause the well filter to fall asleep, which means it does not reduce the quality of drinking water.

The manufacturer offers a 16 meter cord in the kit.

Main characteristics:

Pressure (max), m - 27.
Throughput, cubic meters m/hour - 3.6.
Power, W - 400.
Water temperature, °C - 35.
Weight, kg - 7.7.

pros

compact and lightweight;
good performance;
economical energy consumption;
There is a smooth engine start.

Minuses

short cord, 16 meters;
no dry running protection.

TOP 3 best pumps for a well 40 m deep

Aquario ASP 1E-55-75 (700 W)

If you are the owner of a deep well with a diameter of 10 cm or more, then you should consider this model of a submersible pump with vertical installation.

Thanks to the 700 W motor, up to 3 cubic meters per hour is pumped with a maximum pressure of 60 meters. The immersion depth of this model is 50 meters; the device is designed to work with clean water, the temperature of which does not exceed 35 degrees.

The body is made of stainless steel and is not afraid of corrosion, which indicates a long service life of the pump..

The check valve prevents water from being discharged through the pump into the well after the pump is stopped.

The use of environmentally friendly materials allows you to use the device for pumping drinking water into a private house or cottage.

There is a built-in thermal switch that will protect the engine from overheating and prevent it from starting until the system has completely cooled down.

Main characteristics:

Immersion depth is up to 50 meters.
Pressure (max), m - 60.
Throughput, cubic meters m/hour - 3.
Power, W - 700.
Water temperature, °C - 35.

pros

cord 35 meters;
good performance;
there is a thermal switch;
does not make noise during operation.

Minuses

no dry running protection.

Aquario ASP 1.5C-60-75 (920 W)

Submersible pump for a summer house or cottage with a maximum immersion depth of up to 50 meters and a jet pressure of 77 meters.

Suitable for installation in a well or well with a sand content of up to 120 grams per cubic meter. Per hour, it carries out up to 30 starts, providing water within 3 cubic meters, while consuming 920 W.

It works quietly, installation is very easy, complemented by a 45 meter long power cord.

Also included is a remote control. The pump has a very simple design, consisting of a single-phase electric motor and a pump made of high-quality polymers framed in a stainless steel housing.

Liquid is taken from the middle of the body, which is favorable for working in the presence of bottom turbidity . It is not afraid of voltage surges, so installation of a stabilizer is not required.

Main characteristics:

Head (max), m - 77.
Throughput, cubic meters m/hour - 3.
Power, W - 920.
Water temperature, °C - 35.
Sand content - up to 120 g per cubic meter.

pros

reliable design from an Italian manufacturer;
good pressure and high performance;
full maintainability;
long service life.

Minuses

Dimensions are larger than indicated in the technical data sheet from the manufacturer.

VORTEX CH-60 (800 W)

Pump for wells and boreholes with a diameter of 75 mm, which pumps slightly contaminated or clean water to a private house or garden plot (watering/irrigation).

Immerses to a depth of up to 50 meters, the maximum pressure reaches 60 meters. About 3 cubic meters per hour are pumped thanks to an 800 W motor.

There is protection against overheating; the thermal relay will not allow the engine to operate when the critical temperature is reached.

The body of the model is made of stainless steel, and the pump part is chrome plated.

This helps the pump ensure reliable, trouble-free operation and a long service life.

Water intake in this device is carried out in the middle, between the engine and the impeller block . You can safely connect 2-3 private water supply points to such a pump and provide your home with clean water.

Main characteristics:

Immersion depth is up to 50 meters.
Pressure (max), m - 60.
Throughput, cubic meters m/hour - 3.
Power, W – 800 W.
Water temperature, °C - 35.

pros

good performance;
wear-resistant body;
silent operation;
Suitable for deep and narrow wells.

Minuses

short cord - 20 meters.

Rating of submersible pumps for wells up to 30 meters

After drilling wells, a team of craftsmen must provide accompanying documentation stating which equipment is best suited in certain conditions. It is enough to follow the given instructions. But it doesn’t hurt to find out in advance about the required characteristics.

Belamos TM10-100

Rating: 5.0

Productivity, l/min: 40
Immersion depth, m: 30
Power, W: 2100
Lifting height, m: 100
Dry running protection: no

Average price: RUB 10,555

The rating opens up a submersible pump for a well up to 30 meters Belamos TM10-100 Diameter - more than 100 meters, the installation belongs to the vertical variety. Water supply and organization of watering in the garden are the main areas for which the device is used. The high lifting height of up to 100 meters is the main feature.

The main thing is to maintain a distance of up to 0.8 meters between the pump and the bottom of the source.

The device operates quietly, its productivity is up to 2400 liters per hour. The engine is located inside an oil bath that protects from overheating and the environment.

There is additional overload protection for motors.

Patriot SP 3250 S

Rating: 4.9

Productivity, l/min: 32
Immersion depth, m: 30
Power, W: 750
Lifting height, m: 80
Dry running protection: yes

Average price: RUB 4,930

Designed to supply water from wells located at a depth of up to 110 meters. Compatible with wells of various capacities and natural reservoirs. The immersion depth is up to 30 meters. The content of sand and silt can reach up to 50%; problems with pumping water should not arise even in such conditions. A prerequisite is to rinse the equipment with clean water when pumping ends.

Asynchronous motor equipped with a built-in starting capacitor.

The screw rotor and cage are the main components of the working stage element.

Long-term operation is also one of the advantages and features of the pump.

GILEKS WATERJET 40/75

Rating: 4.8

Productivity, l/min: 40
Immersion depth, m: 30
Power, W: 670
Lifting height, m: 75
Dry running protection: yes

Average price: RUB 11,050

Refers to submersible centrifugal types of pumps for wells. It is equipped with so-called “floating” impellers, which are washed by an electric motor. There is a built-in capacitor. The main purpose of the pump is to supply clean water from wells with a diameter of up to 110 millimeters.

VORTEX CH-100

Rating: 4.7

Productivity, l/min: 40
Immersion depth, m: 35
Power, W: 1100
Lifting height, m: 100
Dry running protection: yes

Average price: RUB 11,120

It supplies clean water from a depth of up to 100 meters or more. Up to 2400 liters can be pumped only at one time. 35 meters is the maximum fence depth. The pump mechanism is made of brass, and the body is made of stainless steel. The case diameter will be 102 millimeters. Convenient immersion and removal of the pump are guaranteed to owners.

TOP 3 best pumps for a well 25-30 m deep

GILEKS Water cannon PROF 55/50 (600 W)

Submersible pump for wells and boreholes with clean cool water for organizing automatic watering of a vegetable garden or garden.

A 600 W motor provides a pressure of up to 50 meters, pumping up to 3.3 cubic meters per hour.

The pump can be submerged to a depth of up to 30 meters . The entire operation of the pump is automated; there is no need to monitor the water level in the source, since the model is equipped with a float switch.

Keep in mind that to create complete automation of water supply to a private house, you will need to purchase some additional parts.

The pump is equipped with a cable 20 meters long and connected to a voltage of 220/230 V.

It does not tolerate regular power surges well, so it is recommended to install a stabilizer to prevent the engine from burning out. The pump body is made of stainless steel, is not afraid of rust and ensures a long service life.

Main characteristics:

Immersion depth is up to 30 meters.
Pressure (max), m - 50.
Throughput, cubic meters m/hour - 3.3.
Power, W - 600 W.
Water temperature, °C - 35.

pros

provides good pressure;
does not make noise;
uses energy economically;
high performance.

Minuses

fragile plastic components;
short power cord.

GILEKS Water cannon PROF 110/110 (1800 W)

The model is easy to use and install, is a centrifugal pump with multi-stage cleaning for immersion to a depth of up to 30 meters.

The pump has a washed motor, a condenser and floating impellers. The device is used for pumping exclusively clean water from wells and boreholes with a diameter of 11 centimeters or more.

Buyers note the high build quality, thanks to which the pump will last a long time without breakdowns.

The body of the device and all bearings used are made of stainless steel, the wheels are made of bronze, and the seals are made of cermet.

One of the advantages of the model is a long power cord (70 meters), so the pump can be connected directly to the power source, without using an extension cord.

It tolerates minor voltage surges well, in this case there is no need to install a stabilizer.

Main characteristics:

Immersion depth is 30 meters.
Pressure (max), m - 110.
Throughput, cubic meters m/hour - 6.6.
Power, W - 1800.
Water temperature, °C - 35.

pros

good performance;
long network cable;
full maintainability.

Minuses

high price.

GILEKS Water cannon PROF 55/75 (900 W)

A reliable pump for a well or borehole, which is designed to supply water to a house where a significant number of people live.

Suitable for installation in a source with a diameter of 10 cm or more; it can pump exclusively clean water, as it is not equipped with fine filters. Large particles can cause clogging and engine damage.

The pump dives to a depth of 30 meters, pumping 3.3 cubic meters per hour with a maximum pressure of up to 75 meters.

For correct, stable, long-lasting operation, care should be taken to stabilize the voltage in advance, since the engine does not tolerate regular surges well and may fail.

The manufacturer in the technical data sheet indicates a service life of three years, but buyers claim that the pump can work twice as long.

Main characteristics:

Pressure (max), m - 75.
Throughput, cubic meters m/hour - 3.3.
Power, W - 900.
Water temperature, °C - 35.
Weight, kg - 11.7.

pros

withstands small voltage fluctuations;
consistently powerful pressure;
good performance indicators;
does not make noise during operation.

Minuses

With regular voltage surges, a stabilizer is required.

The best pumps for wells from 15 meters

GILEKS Water cannon PROF 55/75 A (900 W)

The submersible pumping unit is characterized by high efficiency and low energy consumption . Designed for uninterrupted water supply to a private home and for watering plants.

The model is equipped with a reliable centrifugal mechanism that ensures high performance.

up to 900 W. Power is supplied from the network using a 30-meter cable. The pump can be submerged to a depth of up to 30 m.

It produces a head of up to 75 m . The water temperature should be no more than 35 degrees.

Characteristics:

immersion depth - 30 m;
maximum head - 75 m;
throughput - 3.3 cubic meters. m/h;
power consumption - 900 W;
cable length - 30 m;
weight - 11.6 kg.

Advantages:

low price;
long warranty;
power;
minimal noise.

Flaws:

long design;
socket for fastening the wire made of thin plastic.

UNIPUMP BAVLENETS-M BV 0.12-40U5. 15m

Reliable installation for collecting water from wells and reservoirs . Operates from 220 V and 230 V. Connects using a 15-meter cord.

Made of durable materials that provide protection from mechanical damage and long service life of the device.

The model is suitable for pumping water with temperatures from 0 to 35 degrees . The presence of a vibration mechanism ensures high productivity of 26 liters per minute.

Characteristics:

immersion depth - 40 m;
maximum head - 80 m;
throughput - 1.6 cubic meters. m/h;
power consumption - 245 W;
cable length - 15 m.

Advantages:

high-quality assembly;
powerful;
good pressure;
pumps water without impurities.

Flaws:

high price;
heavy.

GILEKS Water cannon PROF 55/50 A df (600 W)

The device is perfect for organizing a water supply system in dachas and cottages . It can be immersed in a well up to 30 meters deep.

Can be used for watering plants.

Picks up water with minimal solids . High power provides a productivity of 55 liters per minute.

to 600 W. Connects to the mains using a 20-meter cable.

Characteristics:

immersion depth - 30 m;
maximum head - 50 m;
throughput - 3.3 cubic meters. m/h;
power consumption - 600 W;
cable length - 20 m;
dimensions - 9.8×9.8 cm;
weight - 9.4 kg.

Advantages:

high-quality assembly;
optimal pressure;
long cable;
overload protection.

Flaws:

high price;
plastic mounting socket.

GILEKS Water cannon 55/75 A df (900 W)

The device is designed for distributing water into the house and for watering plants . It is distinguished by reliability and high performance. At the same time, it consumes only 900 W.

As an element of automatic water supply, up to 20 connections per hour are allowed.

The installation can be submerged to a depth of 30 m . A 30-meter cord is provided for connecting to the network.

Characteristics:

immersion depth - 30 m;
maximum head - 75 m;
throughput - 3.3 cubic meters. m/h;
power consumption - 900 W;
cable length - 30 m.

Advantages:

reliable body;
Suitable for deep diving;
practically no noise;
economical energy consumption.

Flaws:

high price;
expensive original consumables.

UNIPUMP BAVLENETS BV 0.12-40-U5. 25 m

Reliable pumping unit for pumping water from a depth of up to 40 meters . The body of the model is made of durable materials that protect the device from damage.

The pump is immersed in the well using a cable.

The pump capacity is up to 55 liters per minute with a throughput of 1.6 cubic meters. m per hour . The model is equipped with a 25-meter cable.

Characteristics:

immersion depth - 40 m;
maximum head - 75 m;
throughput - 1.6 cubic meters. m/h;
power consumption - 245 W;
cable length - 25 m;
weight - 3.5 kg.

Advantages:

high-quality assembly;
powerful pressure;
economical energy consumption;
easy installation.

Flaws:

makes a lot of noise;
poor quality of electromagnet gluing.

TOP 3 best pumps for a well 15-20 m deep

BELAMOS 3SP 60/1.8 (600 W)

One of the main advantages of the model, which is noted by customers, is ease of maintenance and complete repairability - to replace the screw mechanism you do not need to contact a service center, you can do it yourself.

The 600 W engine is capable of withstanding up to 20 starts per hour, pumping about 1.8 cubic meters of clean water at temperatures from zero to 35 degrees. The maximum pressure reaches 60 meters.

The pump is used for individual water supply systems, creating watering or irrigation.

Installed in boreholes and wells with a diameter of 8 cm, and can also be placed in natural sources. There is a built-in thermal protection for the engine, which is located in an oil bath for better cooling and protection from water.

Main characteristics:

Pressure (max), m - 60.
Throughput, cubic meters m/hour - 1.8.
Power, W - 600.
Water temperature, °C — 35..
Weight, kg - 9.7.

pros

good pressure;
does not overheat;
low noise level;
versatility of use.

Minuses

no dry running protection.

UNIPUMP ECO 2 (750 W)

The pump is made of environmentally friendly materials, so the water from it can be used not only for domestic needs, but also for drinking.

Does not make noise during operation, connects to a voltage of 220/230 V. Installed in wells and wells with a diameter of 11 cm, can participate in the organization of watering or irrigation.

Good performance indicators . When diving to a depth of 20 meters, it provides up to 4.8 cubic meters per hour with a pressure of 60 meters.

Not suitable for use in muddy or sandy sources, the total amount of impurities should not exceed 100 g per cubic meter.

The engine starts smoothly, with a gradual increase in speed, there is protection against overheating . Supplied with a 30 meter long network cable.

Main characteristics:

Pressure (max), m - 60.
Throughput, cubic meters m/hour - 4.8.
Power, W - 750.
Water temperature, °C - 35.
Weight, kg - 17.

pros

good performance;
does not make noise;
sufficient cable length;
Suitable for drinking water.

Minuses

no protection against dry running;
no check valve.

DELTA NP2-55/60 (900 W)

Submersible pump with vertical installation and 900 W motor. Falls to

depth up to 15 meters, designed for pumping clean water with temperatures up to 35 degrees.

In an hour it gains 3.3 cubic meters with a maximum pressure of 60 meters.

The stainless steel case is not afraid of corrosion and can withstand a long service life.

The pump is an inexpensive model that can be installed in private houses and cottages, in summer cottages, and used in watering and irrigating gardens.

The engine is cooled by a jet that passes through it; there is a thermal relay to stop the system in case of overheating.

No noise, easy to use and install. Supplied with a cord 30 meters long.

Main characteristics:

Immersion depth - 15.
Pressure (max), m - 60.
Throughput, cubic meters m/hour - 3.3.
Power, W - 900.
Water temperature, °C - 35.

pros

good performance;
low noise level;
strong pressure.

Minuses

no dry running protection.

The best pump for a well up to 15 meters

QuattroELEMENTIDeep 1100 Pro 772-524

Rating: 5.0

Capacity, l/min: 91
Immersion depth, m: 2
Power, W: 1100
Lifting height, m: 86
Dry running protection: no

Average price: RUB 13,290

The best model for wells up to 15 meters. A model that has an optimal combination between price and quality. Consumers especially note silent operation for a long time.

Other positive aspects:

High quality stainless steel and brass body.
Cable connection kit, hose fitting included in original kit. That is, there is everything you need to instantly connect the equipment.

Consumers say that the device works stably for several years in a row, maintaining the characteristics at the same level.

The engine is filled with oil for cooling, so there is no need to worry about overheating.

ELPUMPSBP 3/3

Rating: 4.9

Capacity, l/min: 42
Immersion depth, m: 10
Power, W: 1100
Lifting height, m: 67
Dry running protection: no

Average price: RUB 14,860

Can work with several objects at the choice of buyers:

Mine wells.
Wells.
Reservoirs.
Storage tanks.

Reliable deep well pump. The body diameter is reduced to 3 inches due to a three-stage pump mechanism. Thanks to this, work in mines with a small width is permissible. To meet the standard for domestic water supply, the output is 42 liters per minute. Long service life is ensured by the stainless steel housing. You don't have to worry about loss of performance properties. The holes for attaching the mounting cable are located at the top.

To protect against overheating, the design is supplemented with a so-called thermal relay. IPX8 is the maximum protection class that guarantees uninterrupted operation in all conditions. The device parameters are suitable for installation in casing pipes with a diameter of up to 90 millimeters.

Good quality of materials and workmanship is guaranteed.

ElpumpsBP 10

Rating: 4.8

Productivity, l/min: 75
Immersion depth, m: 10
Power, W: 1400
Lifting height, m: 60
Dry running protection: no

Average price: RUB 19,990

A well pump with compact dimensions, designed to supply groundwater to water supply systems. 4 inches is the standard diameter that the pump has. Stainless steel and other high-quality materials used in manufacturing ensure durability. Corrosion protection guaranteed.

It pumps about 70 liters of water per minute, performance remains high regardless of environmental conditions.

Which company should you choose?

In order for the pump to serve for a long time and not cause trouble by constantly breaking down, it is not recommended to skimp on quality.

Experts advise choosing among popular brands that are time-tested.

They produce both pumps for wells and boreholes. Their products are famous for their good performance and reliability.

The ranking of the best manufacturers is led by such companies as Grundfos from Denmark, domestic VORTEX, Aquarius, Gilex, German Denzel, Karcher.