How to regulate the temperature in a two-chamber refrigerator Stinol

Instructions for two-chamber refrigerators Stinol

How to adjust the temperature in a two-chamber refrigerator Stinol 101

Refrigerator Stinol 101 is a two-chamber device that consists of a refrigerating and freezing compartment. The unit is controlled using an electromechanical control method. The model has one compressor and two independent evaporators, providing air cooling to the required level in both compartments.

The average temperature of the refrigerator compartment is +5°C, the freezer compartment – no higher than -18°C. Maintaining the temperature at a given level is a consequence of periodically turning the compressor on and off using a thermostat and a start-up relay.

The refrigeration compartment of the device is defrosted automatically before the next start of the compressor. The accumulation of melt water occurs in a special container on the compressor, after which it evaporates.

The freezer compartment must be defrosted manually when a layer of frost exceeds 5 mm.

How to adjust the temperature in a two-chamber refrigerator Stinol 103 (rf s 345)

The Stinol 103 two-chamber refrigerator with a bottom freezer is equipped with two compressors and two evaporators with a series connection. This ensures autonomous operation of the refrigerator and freezer compartments with the ability to independently adjust the temperature and turn off one of the chambers using regulators on the control panel.

Defrosting of the refrigerator compartment is carried out automatically by the drip method. The freezer compartment must be defrosted manually.

How to adjust the temperature in a two-chamber refrigerator Stinol 104

The Stinol-104 refrigerator-freezer is three-chamber and consists of a refrigeration, freezing and retractable (for storing vegetables and fruits) chambers. The freezer compartment, located at the top of the refrigerator, is equipped with a “No Frost” system with cold air circulation and automatic defrosting of the evaporator. The timer periodically turns off the compressor and fan, and turns on the heating elements of the evaporator and the freezer tray. As the layer of frost on the evaporator melts, the water flows onto a heated tray and through channels enters a tray for collecting melt water, where it evaporates. The thermostat is located on the top control panel. Turning the thermostat knob clockwise increases the operating mode of the refrigerator. We recommend setting the thermostat to the middle position.

How to adjust the temperature in a two-chamber refrigerator Stinol 107

The Stinol 107 device is a two-chamber refrigerator equipped with one compressor. Cooling of the freezer compartment is carried out due to the operation of the No Frost system evaporator and fan. The refrigerator compartment is cooled thanks to an independent evaporator located on the outer surface of the rear wall.

The minimum temperature maintained by the freezer is -18 degrees Celsius. Additional features include a super freeze function.

How to adjust the temperature in a two-chamber refrigerator Stinol NF 330 4T

Stinol nf 330 4t is a representative of three-chamber refrigerators with one compressor. Equipped with four temperature zones, defrosting automatically. The temperature regime of each compartment is independently regulated, which allows you to set the optimal temperature for storing various products.

The freezer maintains temperatures down to -18 degrees Celsius. In the pull-out container for vegetables, the mode is set from +8 to +14 degrees.

How to adjust the temperature in a two-chamber refrigerator Stinol 110

The adjusting knob with a risk for both chambers has the same number of working positions - there are 5 of them. But the thermostats for the refrigerator and freezer chambers are used differently. The freezer is equipped with a No Frost system; the thermostat has a circuit with cyclic activation of the dry ice sublimation system.

The instruction manual for the Stinol refrigerator includes a section that contains instructions on how to adjust the temperature. Both cameras have a control knob and a risk for rotation. Number 1 corresponds to the highest temperature in the control range, number 5 to the lowest. The position is indicated on the overlay.

Initially, the indicators are set in the middle part of the scale, even before turning on the device. According to the instructions, the cold must accumulate in the chambers within 4 hours, and only then can food be placed there.

You need to adjust the handle gradually, turning it by 1 notch after 5-6 hours, measuring the temperature inside the chamber. If the device does not respond to commands, it is necessary to determine whether the thermostat is working.

How to adjust the temperature in a two-chamber refrigerator Stinol 110L

Cuttings - two sticks and one stick. One is the Arrow Bow. Two sticks are the fletching of an arrow.

Minimum temperature - turn counterclockwise until it stops too much (“one stick”), a little more and the refrigerator will turn off. Normally it is considered in the middle.

The closer to min., the less the compressor works, which means less energy consumption.

But! Too low and the temperature may not be enough and the food will start to “sour.” Install it like that.

The middle, after a day or two less. The temperature is satisfactory, after a day - two more a little less. It’s getting a little warm in the cell, turn it back a little.

How to adjust the temperature in a Stinol two-chamber refrigerator with a drip system

Adjustment of equipment with a drip system is carried out after installation in the room. For stable air circulation, it is necessary to leave a small space between the sides of the equipment and the rear block of the case. The spacing parameters are indicated in the technical documentation.

The work is carried out in the following sequence:

The Stinol refrigerator must be left in the room for 3-4 hours. The device is then connected to a household electrical outlet.
The adjustment is performed in standard models using a thermometer.
The thermometer must be placed inside the refrigerator compartment, while the temperature corrector is placed in the middle position.
After operating the equipment for 2-3 hours, the thermometer parameters must be checked.
When the thermometer reading is +2…+5°С, the equipment is considered to be configured correctly.
At the next stage, the freezer section is checked, it is necessary to set the temperature to at least -18...-21°C.

To increase the degree of cooling, you need to turn the knob clockwise, leaving the regulator in the central position.

When the chamber and compartments are heavily loaded with food, it is important to reduce the temperature in the refrigerator to prevent food spoilage.

Defrosting of freezing equipment is carried out manually when the frost layer is more than 5 mm.

How to adjust the temperature in a Stinol two-chamber refrigerator with No Frost system

Using the example of the Stinol 110 refrigerator, we will consider how to regulate the temperature. On the top panel there are 2 control units with screws and divisions. You need to reduce the temperature by tightening the screw clockwise. There is no temperature indicator on the panel. Therefore, you need to act gradually, adding or decreasing the temperature slightly. After each action, at least 4-5 hours should pass. If at the same time the compressor starts working without interruption, the evaporator freezes intensively, not far from an accident. Then you need to reduce the temperature and call a technician.

Operation of Stinol refrigerators

The operating instructions for refrigeration equipment of the Stinol brand are similar for all models. They reflect information on using the capabilities of the units and preventing their failure as a result of incorrect actions by the owner.

The general operating instructions contain the following sections:

general instructions – information about the purpose of the device;
technical data, dimensions, device composition and equipment;
the design of the model and the principle of its operation;
safety requirements - features of connecting the device to the electrical network;
preparing the device for operation;
rules for operating and caring for the device, in particular, mode control, features of temperature distribution across existing chambers, tips for rational placement of products;
possible malfunctions of the unit and repair methods;
manufacturer's warranty.

Next, we will consider the main technical characteristics of popular models of Stinol refrigerators and get acquainted with the principles of their operation.

Model 101

The freezer compartment must be defrosted manually when a layer of frost exceeds 5 mm.

Model 103 (rf s 345)

Defrosting of the refrigerator compartment is carried out automatically by the drip method. The freezer compartment must be defrosted manually.

Model 104 (nf 330 4t)

Stinol 104 is a single-compressor refrigerator, which consists of three chambers: a refrigerator, a freezer and a drawer for placing vegetables and fruits. Equipped with four temperature zones, defrosting automatically. The temperature regime of each compartment is independently regulated, which allows you to set the optimal temperature for storing various products.

The freezer compartment, located in the upper part of the device body, is equipped with a No Frost system, which ensures automatic defrosting of the evaporator when necessary.

The refrigerator compartment is equipped with a weeping evaporator to keep food cool. An autonomous pull-out compartment for storing vegetables is located under the refrigerator compartment. Its cooling occurs due to the penetration of cold air from the main compartment through a special hole on the rear wall of the case. In the pull-out container for vegetables, the mode is set from +8 to +14 degrees.

Model 107

The minimum temperature maintained by the freezer is -18 degrees Celsius. Additional features include a super freeze function.

Model 116el

The model for domestic use Stinol 116 el is a free-standing refrigerator with a freezer located in the lower part of the body. The device has the following technical characteristics:

The refrigerator compartment of the device is equipped with four shelves, two opaque containers for vegetables and fruits, and hanging shelves on the multibox door. The freezer compartment contains two boxes with hinged lids and one pull-out container.

Due to the lack of an automatic defrosting function for the freezer, the electrical circuit is quite simple compared to other models from the manufacturer.

Model 123 l

Refrigerator 123 l consists of the following elements:

compressor;
drip-type evaporator for the refrigeration compartment;
No Frost system freezer evaporator;
capacitor;
drying filter;
capillary pipeline.

The freezer compartment of the device is located in the lower part of the body. It has a fairly large volume - 102 liters. Cooling of the refrigeration and freezer compartments occurs according to a dual-evaporation scheme, as in models Stinol-101, Stinol-107. Defrosting of both the main and minus compartments occurs automatically.

The device operates according to the following principle:

when the refrigerator is turned on, the compressor begins to draw in refrigerant vapor from the evaporators through a special suction pipeline;
These vapors are directed through the discharge pipeline to the condenser for cooling and liquefaction;
in liquid form, the refrigerant is directed into the evaporator channels, passing through a filter drier and a capillary tube;
When boiling, the refrigerant turns into a gaseous state and absorbs heat from the cooled environment.

The described cycle is regularly repeated, ensuring cooling of the internal chamber of the refrigerator and the products in it.

Model rf s 275

The Stinol rf s 275 refrigerator has the following technical characteristics:

The internal filling of the refrigerator consists of three lattice shelves, two of which are height adjustable, two pull-out containers for vegetables, and a balcony shelf with a lid. The set also includes an egg tray and a spatula for safely removing frost.

Model nf 330 4t

The freezer maintains temperatures down to -18 degrees Celsius. In the pull-out container for vegetables, the mode is set from +8 to +14 degrees.

What temperature should be in a two-chamber refrigerator Stinol

The new Stinol refrigerator must stand in the room without being turned on for at least 2 hours. The coolant needs to occupy the required labyrinths. Before turning on, the temperature regulator is set to the middle position 3, if the room is 25 0 C. When the room is hot, set positions 1-2, if cold, shift to the maximum, by 5. This is necessary so as not to upset the thermodynamic balance between the chamber and the environment .

According to the factory setting, the temperature among departments in a two-chamber refrigerator Stinol is distributed as follows:

The temperature in the plus compartment from top to bottom is from 0 to 10 0, remaining on average +5 degrees in the center. The lowest level, with the highest temperature, is intended for storing vegetables and fruits.
A refrigerator of climate class ST (subtropics) has an estimated average temperature of +7 degrees.
The freezer compartment marked **** is intended for freezing products for a short time and storing them at 18 0 C in the future. In the remaining boxes the temperature is 18 degrees.

Super mode is used for fast and deep freezing. The static cooling system is equipped with drip moisture removal. The No Frost system turns on a heater that melts the ice from the evaporator, the melt water flows into the bath behind the compressor.

In the freezer of the Stinol refrigerator, in the “Super” mode in the upper chamber, the temperature will drop to 24 0 C. On all shelves, with the regulator in the middle position, the degrees should correspond to the number of stars, but not more than -18.

It’s easy to set the temperature electromechanically in a Stinol two-chamber refrigerator. When adjusting the temperature, you should always strive for average values, as the most rational ones. In a Stinol two-chamber refrigerator this is +5 degrees for the cabinet and -18 for the freezer.

What temperature should it be

The new Stinol refrigerator must be left unplugged for up to 2 hours. Before turning on the equipment, you must set the regulator to level 3, if the room is +25°C. At a higher temperature, it is necessary to set positions 1-2; in a cool room, mark 5 is set to maintain balance.

What temperature should be in the refrigerator depends on the location of the compartment:

In the main compartment it is 0°C at the top and +10°C at the bottom, in the center it should be maintained at +5°C. Vegetables are stored in a warm compartment on the lower level.
Equipment belonging to the subtropical climate class (ST) has a standard general mode of +7°C.
The freezer compartment, marked with the “****” icon, is used for freezing products in a short time and storing them at -18°C.

Technical characteristics vary depending on the type of storage product:

in departments for meat, hard cheeses, fish, eggs, a regime of about +1...+3°C should be maintained;
in compartments for placing sausages and culinary products, you need to set the mode to +2...+4°C;
for storing milk, boiled vegetables, fresh herbs, it is optimal to maintain a temperature of +3...+5°C;
in seafood sections +4…+6°С is maintained;
in the fruit department the proper mode is +6…+8°С;
The temperature on the refrigerator doors is maintained within +5...+10°C; sauces, medicines, and drinks are placed in the niches.

View » Why a new refrigerator makes a loud noise when operating: what to do, how to reduce the noise with your own hands

When placing products, it is important to take into account the temperature distribution in the freezer and the size of the equipment (one- or two-chamber unit). The minimum mode is marked along the rear compartment, into which the refrigerant pipes are mounted.

Optimal temperature for food in a two-chamber refrigerator Stinol

The temperature regulator of the Stinol refrigerator must be fixed in the position that, according to the instructions, most corresponds to the ideal temperature regime. After this, the products are placed on the shelves in accordance with the storage standards established for them and the cold distribution system throughout the chamber (for some models, the coldest shelf is the top one, and for some, the middle one).

So, what temperature in a Stinol two-chamber refrigerator will be optimal for the different foods stored in it:

Meat and fish dishes, as well as eggs, hard cheeses, milk and dairy products, sauces are best preserved at a temperature of +1 to +3°C, so they are placed on the coldest shelf.
In the range from +2 to +4°C, sausage, cheese, ready-made cereals and semi-finished products feel great.
Soups, boiled vegetables and bread stay fresh longer if stored at a temperature of +3 to +5°C - this is the middle shelf.
The established temperature standard for seafood is from +4 to +6°C, therefore, this should be the temperature on the shelf where they are stored.
Fresh vegetables and fruits are placed on the lowest shelf or in a special compartment, where the temperature ranges from +6 to +8°C (the only exceptions are pineapple and banana - they are best kept outside the refrigerator at room temperature).

When frozen, any product will be stored for quite a long time.

Temperature standards for the refrigerator for various products

Refrigerator Stinol

So, what temperature in the Stinol refrigerator will be optimal for the different foods stored in it:

Meat and fish dishes, as well as eggs, hard cheeses, milk and dairy products, sauces are best preserved at a temperature of +1 to +3°C, so they are placed on the coldest shelf.
In the range from +2 to +4°C, sausage, cheese, ready-made cereals and semi-finished products feel great.
Soups, boiled vegetables and bread stay fresh longer if stored at a temperature of +3 to +5°C - this is the middle shelf.
The established temperature standard for seafood is from +4 to +6°C, therefore, this should be the temperature on the shelf where they are stored.
Fresh vegetables and fruits are placed on the lowest shelf or in a special compartment, where the temperature ranges from +6 to +8°C (the only exceptions are pineapple and banana - they are best kept outside the refrigerator at room temperature).

Food in the refrigerator

When frozen, any product will be stored for quite a long time.

Checking the temperature in a two-chamber refrigerator Stinol

How to check the temperature in a Stinol two-chamber refrigerator:

Install a regular outdoor thermometer inside the refrigerator compartment.
Set the temperature regulator to the position recommended by the instructions (usually 3, you can try moving it to position 4).
Leave the thermometer in the chamber for two hours, then check the temperature. At the optimum temperature of +2 +5°C nothing else needs to be adjusted. If the temperature is above the set mark, move the regulator another notch forward and measure for another hour. If the temperature is too low, turn the knob back.
Similar steps for measuring temperature are carried out for the freezer, the normal limits of which are –18…–21°C.

Temperature sensor on a two-chamber refrigerator Stinol

Sensors for the refrigerator and freezer compartments differ in design. How to set the temperature in a Stinol two-chamber refrigerator with electronic control is described in detail in the instructions.

After 5-7 years of operation, the temperature regulator most often fails due to a violation of the tightness of the bellows - the temperature-sensitive element. Repairing it is difficult and expensive; it is better to buy a new device. Sensor malfunction is determined by the following symptoms:

The compressor operates without switching off at any position of the regulator.
The compressor runs constantly, the temperature in the chambers drops more and more.
The temperature rises, but the compressor does not receive a command to turn on.
It is impossible to check the serviceability of the regulator at home; you need a special stand.

The most important factor due to which the food in the refrigerator will retain its properties for a long time, and the refrigerator itself will serve you faithfully for decades, is maintaining the correct temperature conditions in the refrigerator and freezer. To establish this mode, when putting the unit into operation, the temperature is adjusted in accordance with the instructions included with the device.

Problems of Stinol refrigerators and their elimination

Useful links:

https://rembitteh.ru/ask-answer/81563/ - what should be the temperature in Stinol 110L.
https://mastergrad.com/old_forum_archive/1/115837.shtml - how to lower the temperature in the refrigerator compartment of Stinol 104.
https://www.elremont.ru/holod/fz_rus/fr_rem21.php - repair of the Stinol 104 refrigerator.
https://holodilniki-rem.ru/stinol_regulirovki.html - Adjustments and settings of Stinol refrigerators.
https://www.holodilnik.info/forum/f1-holodilniki-i-morozilniki/t10587-pomogite-holodilnik-stinol-110-a/ - problems with the Stinol 110 refrigerator.
https://www.ufaprofi.ru/stati/holodilnik-stinol-ne-morozit-chto-delat/ - what to do if the Stinol refrigerator does not freeze.
https://tehpoisk.ru/articles/stinolllsh - diagrams and repair of Stinol refrigerators.
https://www.holodilnik.info/forum/f24-forum-dlya-masterov-holodilnoi-tehniki/t9466-pomogite-stinol-104-a/ - problems with the Stinol 104 refrigerator.

Do you want to understand better than others?

How to adjust the temperature in the refrigerator - A refrigerator is a piece of household appliance, the correct operation of which depends on the correct installation of technical settings. From this article you will know: how to independently...
How to adjust the temperature in the STINOL 104 refrigerator - The Stinol-104 refrigerator-freezer is three-chamber and consists of a refrigerator, freezer and drawer (for storing vegetables and fruits) chambers. The freezer is located in the top…
How to adjust the temperature in a two-chamber Samsung refrigerator (Samsung) - Mechanical or electronic regulators are used to adjust the mode. Regulators are: mechanical - in the form of a wheel, rotary disk; electronic -…
How to adjust the temperature in a two-chamber refrigerator Saratov - Mechanical or electronic regulators are used to adjust the mode. Regulators are: mechanical - in the form of a wheel, rotary disk; electronic -…
How to adjust the temperature in a Biryusa two-chamber refrigerator - Mechanical or electronic regulators are used to adjust the mode. Regulators are: mechanical - in the form of a wheel, rotary disk; electronic -…