What is a floor cooler
A floor cooler is a device that heats or cools water and allows the consumer to use cool or hot liquid at any time.
The multifunctional device was invented at the beginning of the last century by Halsey Taylor. Since then, a huge number of manufacturers and models of the unit have appeared. The advantage of a floor-standing device is that it has expanded functionality: it not only supplies water at the right time, but also hides dishes and household items behind the doors of the built-in cabinet. There are also types of appliances equipped with a refrigerator. There are accessories that can make the cooler even more functional. And the modern design of many models ensures an organic combination with other interior items. The device operates quietly. Ideal for offices and public institutions.
Types of floor-standing appliances
The question about what types of units there are can be answered as follows: with different types of loading, cooling and additional equipment.
Let's take a closer look at each type:
- A plastic bottle can be loaded both from below and from above. Located downstairs, it is hidden in a special closet. The cost of a bottom-loading device will be higher. But this type is more practical.
- There are also flow-through coolers, the source of water for which is tap water.
- Cooling option. If this process occurs due to the compressor, the device should be transported and maintained exclusively in a vertical position. A standard unit can cool about three liters of water in one hour. The electronic type is less powerful and has lower performance. Less cost too. The temperature of the air in which the device heats and cools the liquid should not exceed 28 ℃. There are no restrictions on the method of transportation.
- Additional equipment may include refrigerators and storage cabinets. Their cost is higher than the price of a model without related functions, but the benefits of such a purchase are greater.
Coolers can also be multifunctional and have the following options:
- Fridge. An excellent solution for containing milk, cream, sandwiches and other snacks.
- Built-in cup holder.
- Kettle. The liquid cannot be heated to a boil. The manufacturer Ecotronic has taken care of those who are used to brewing tea or instant meals with boiling water.
- Ice maker.
The appliance can also have a carbonation function. It will give a lot of pleasant sensations to those who love carbonated drinks. A device with a cabinet will conveniently place all the tea accessories.
Characteristics
In order for comparison of one model with another to be effective, you need to understand what properties the device has and how they affect its performance.
The technology has the following characteristics:
NumberCharacteristicsExplanation
1 | Control method | It can be mechanical or electronic. The first one is usually more affordable. When choosing, you should rely on personal preferences and the visual effect. |
2 | Water supply method | It can be arranged through replaceable bottles or through a water supply with cold liquid. |
3 | Load Type | Top or bottom. It will be easier for a team consisting of women to change the bottle if it is located below, since it will not have to be lifted. Bottom loading is also the most aesthetically pleasing: the bottle is hidden behind the doors of a special compartment. |
4 | Economical | How much electricity is spent on its operation? |
5 | Cooling type | Compressor or electronic. The first is the most powerful and productive. |
6 | Safety | It is important that the design of the device is designed taking into account protection from current and contamination by microbes. Many models have a child lock feature on the hot water tap. The material from which the device is made must be of high quality and durable. |
7 | Design | There are devices that are simpler in appearance. There are models that were developed hand in hand with designers. They will perfectly complement the interior in loft, hi-tech, modern style, etc. |
8 | Price | An important aspect that is influenced by belonging to a particular brand, design, additional functions, dimensions of the device and other characteristics. |
Advantages and disadvantages
The home cooler has a number of functions that make life more comfortable. To make the right choice, it is important to analyze its positive and negative sides before purchasing.
Advantages:
- Preservation of the beneficial properties of water, because the cooler does not bring it to a boil.
- Unlimited access to cold and hot life-giving moisture.
- Saving on energy consumption. Most models consume no more than one kilowatt.
- Easy and quick installation. Its installation will not require any furniture or equipped area.
- Design. A huge selection of models makes it possible to select a device of any color, shape and design.
- Compactness. The equipment is small in size and does not take up much space.
- Additional features: water carbonation, filtration. Availability of an ozonizer, minibar, refrigerator, cupboard for dishes or tea and coffee.
Flaws:
- Flow-through models or units with a large range of additional functions can be expensive.
- If the floor cooler is top loading, not every woman will be able to replace the bottle.
Best Tabletop Water Coolers
The desktop water cooler is a compact and convenient device. This device takes up very little space and is installed directly on a table or cabinet. Can be used both in offices and at home. Below will be presented the TOP 6 models that have won the trust of users.
HotFrost D1150R
Compact desktop cooler with a height of 36.5 cm. Designed for installation on a flat surface of a cabinet or table. The weight of the device is only 1.65 kg. The case has a pleasant appearance and high build quality. A bottle of water is placed on top of it. You can buy a desktop water cooler for up to 2 thousand rubles.
This model does not require an electrical connection, which means it can be installed anywhere. The device allows you to pour the required amount of water from a bottle into a glass, which is at room temperature. This model is not capable of heating and cooling water.
Advantages:
- compact dimensions;
- low price;
- does not require a network connection;
- Can be installed on a regular table.
Flaws:
- small water dispenser;
- does not heat or cool.
AEL TK-AEL-108
The small desktop cooler model is equipped with only a heating function. There is no water cooling, you can only get hot water or room temperature. The device is capable of heating liquid up to 85 degrees. The power of the heating device is 500 W. The desktop water cooler has a nice body design. A bottle of water is placed on top. To pour water into a glass, just press the corresponding button. This is an ideal option for installation in kindergartens, classrooms, and offices.
Advantages:
- easy water supply;
- small sizes;
- modern design;
- no need to connect to the network.
Flaws:
- does not cool.
Aqua Work 16-TD/EN
The desktop water cooler has an advanced design and impressive functionality. The compact device can quickly cool liquids up to 12 degrees thanks to a power of 70 W. Electronic type of cooling is used. At the moment of heating, the power is 700 W.
A special storage capacity is provided. Water is poured from the tap by pressing the mug. During operation, the LED backlight is activated. The refrigerated water cooler is not only functional, but also beautiful.
Advantages:
- modern design;
- backlight;
- build quality;
- metal side walls;
- sustainability;
- heats and cools;
- powerful.
Ecotronic H1-TE
A heated water cooler is the best option for the office. The attractive design will look good in any room. Despite its small size, it has fairly high performance. Electronic cooling has a power of 100 W. The heating power is 500 W.
When purchasing this type of dispenser, remember that its height is 48 cm excluding the bottle. Capable of cooling 0.8 liters per hour. Heats up 5 liters of liquid per hour. The high cost of the cooler is due to its high quality. It is equipped with a collapsible hot water tank, which is convenient for future repairs.
Advantages:
- powerful characteristics;
- quickly cools water;
- ease of maintenance;
- small height;
- heating function.
Flaws:
- high price.
Ecotronic K1-TE
The Ecotronic K1-TE water cooler with cooling and heating will allow you to quench your thirst or prepare hot drinks at any time. Intended for installation in office premises. Can also be used at home, in kindergartens, schools. The height is 37.5 cm. By placing a container of water on top, the height will increase accordingly. Electronic cooling allows you to get 0.8 liters of water in just an hour of continuous operation. The heating function works much faster. In an hour you will get 3 liters of hot liquid.
Advantages:
- heating power 500 W;
- excellent performance;
- convenient taps;
- compact sizes.
Ecotronic H2-TE
This is the best desktop heated water cooler. It has a beautiful design and a nice silver color. There is nothing superfluous on the body. The laconic appearance will look perfect in any interior. Equipped with an electronic type of cooling with a power of 100 W. Heating occurs quickly thanks to the power of 500 W. The device has high performance and can warm up to 5 liters in an hour. The height of the device without container is 42 cm.
Advantages:
- excellent build quality;
- laconic and attractive design;
- heating function;
- high performance.
How does a floor-standing water cooler work?
A floor cooler is a fairly large device in the form of a parallelepiped, less often a cylinder, up to 120 cm high, if you do not take into account the size of the bottle. Installation of a conventional device is quite simple. He needs to allocate a space of approximately 45x45 cm and provide access to the outlet. You can see how to install the dispenser in the instructions. To understand which unit is better to buy, you need to understand how it works and what to pay attention to.
If you start examining the cooler from the top, you will notice that it is equipped with one, two or three taps. One of them is installed for hot water, the second for cold water, and the third for room temperature water. The liquid is supplied by pressing the petal with a mug or the touch button with your finger. Premium models are most often equipped with touch buttons. Budgetary ones supply water using the first method.
If the appliance is top-loading, the bottle must be turned over and placed in the recess with the pin. The force of gravity acts on the water and forces it to flow into the glass. The dispenser can work without electricity. When loading is bottom, an electric pump is needed to supply liquid to the tanks. Accordingly, without an outlet the device is useless.
On the back side, the cooler can be smooth or have a built-in fan. Visually, this is what distinguishes the compressor type of device from an electronic one. The first type contains a compressor inside that pumps refrigerant (freon R134a). The device operates on the principle of a conventional household refrigerator. Its main features are that the water in it cools down to 8 ℃, has a significant weight (up to thirty kilograms), and is not as quiet in operation as its electronic counterpart.
The second type is equipped with an electronic board. It works due to the property of materials of different conductivity to change temperature under the influence of current. These devices are inexpensive. The water temperature in them does not drop below 12 ℃.
The rear or side panels can also be equipped with toggle switches. If they are not there, then the device will only be able to provide a drink at room temperature; it does not need a connection to the electrical network. If there is only one toggle switch, the cooler is heating only. If there are two of them - with heating and cooling. Features that are currently unnecessary can be disabled.
A light indication indicates that the device is plugged in and ready for use. The simplest option is two or three LED lamps. There may be an LCD monitor indicating active modes. It also allows you to set the mode, configure energy saving, and set the water temperature.
Refrigerated coolers have lower cooling capacity. Conventional ones cool on average 2.5 liters per hour, a device with a refrigerator - no more than 2 liters. If the team is small, this will be enough. You can safely choose a kitchen cooler with this option; it will easily provide drinks for all family members. A small puddle of liquid may sometimes accumulate under the device. It does not have a No Frost system. When opened, warm air enters and condensation forms.
How does a flow cooler work?
A flow-through dispenser or purifier is quite simple. For it to work, it must be connected to a water supply. The equipment does an excellent job of purifying water from:
- mechanical impurities,
- heavy metals,
- organic compounds,
- chlorine,
- magnesium and calcium salts.
Advantages:
- no need to order bottles and look for a place to store them;
- the mug contains relatively inexpensive mineralized clean water;
- saving money;
- Ease of use.
Flaws:
- the need to periodically change filters;
- high price;
- cannot be transferred from one place to another;
- If there is an emergency shutdown of the water supply, the purifier will not be able to be used.
How to choose a water cooler
When choosing a device, there are several important parameters to consider. Among them are the type of cooler and its capabilities, as well as control features.
Installation
Floor-standing models are usually purchased for offices, where many people need to be provided with water. A desktop cooler is well suited for a small family or a business with a small staff.
Bottle location
Placing the water container on top of the machine may be difficult for people with limited physical strength. When purchasing, you need to think in advance about how the tank will be replaced.
Functional
When choosing a water cooler based on parameters, you need to decide in advance what it is needed for. Some models only dispense cold drinking liquid, while others have a hot tap and can be used to quickly brew tea.
Additional options
Many coolers are equipped with refrigerators, ozonizers, food cabinets and even wine compartments. Often, buying a more expensive dispenser helps you save on purchasing other equipment.
Which water cooler is best to choose for your home?
To buy a good water cooler for your home, you need to assess the size of your family and its needs. Usually, for two people, the capabilities of tabletop models with bottles from 5 liters are enough.
Tabletop dispensers are well suited for home use due to their compact size and low price.
If the family is large and the consumption will be high, it is better to choose a floor-standing type of water cooler, having previously determined a place for the unit in the apartment. But it is not necessary to make high demands on functionality. Since the house already has a kettle, a refrigerator, and kitchen cabinets, you can buy a device without heating water, without a cooling chamber and additional compartments.
How to choose a water cooler for the office
Tabletop water cooler models are only suitable for very small businesses. If the company employs more than five people and clients and partners regularly come in, you need to buy a floor-standing device with a large bottle. In this case, it is advisable to choose units with good functionality - water heating, cooling function. A built-in refrigerator will also be in demand.
For offices, it is customary to purchase coolers with increased performance and two supply taps. Important! It’s good if the office cooler is equipped with a cup holder - visitors will be able to use disposable tableware.
Performance
A variety of selection criteria are described above. One important one is performance. In the technical description you can find indicators of heating power, hot water output (liters per hour) and the volume of the heating tank.
If the equipment is designed for maximum heating of water to a temperature of 95 ℃, then the liquid in the mug will be 5-6 ℃ lower. It is also worth remembering that the cooler does not allow you to drain all the hot water. If the tank holds one liter of liquid, after two cups of hot drink you will have to wait a few minutes until the newly received cold water heats up to the desired temperature.
Below are the characteristics that, according to buyers, are the most successful:
- liter hot water tank, heating power: five hundred or seven hundred watts, productivity: five or seven liters per hour;
- three-liter hot water tank, heating power: five hundred or one thousand watts, productivity: seven or ten liters per hour.
With a larger tank volume, you can brew more mugs of coffee or tea at a time. And the heating power is responsible for the number of heated liters in one hour.
Service
The fact that the cooler uses bottled water may lead you to believe that it does not need cleaning. But this judgment is wrong. The visible parts of the dispenser become covered with dust, the taps become dirty, and the drip tray fills up. Scale accumulates in the hot water tank. You should contact technical support once a year. A specialist will come to your home or office and carry out a complete cleaning of the internal system, rinse the equipment outside, taps and carry out antibacterial cleaning. The water will always be clean and the cooler will have a long service life.
Best Floor Standing Top Loading Water Coolers
HotFrost V900CS
A floor cooler with a single tap through which heated, chilled or room temperature water is supplied. Turn on the filling using the corresponding button. This is a cooler with a heater power of 600 W with an upper, inverted bottle arrangement. The model uses more efficient (compared to electronic) compressor cooling technology. The power consumed by the compressor is 120 W. Capacity for hot water (90-95°C) – 5 l/h, for cold water (5-10°C) – 2 l/h. Device dimensions: 31x32x97 cm. Manufactured in China, cooler warranty - 2 years, compressor warranty - 5 years.
Main advantages:
- Tanks for heating and cooling are made of stainless steel.
- Separate switches for heating and cooling.
- Child protection.
- Heating/cooling indication.
- Built-in cabinet for dishes (volume 15 liters).
- Removable drip tray.
- The case is made of dense glossy plastic, elegant appearance.
Minuses:
- The package does not include a bracket for disposable cups; it must be purchased separately.
9.7 / 10Rating Reviews Quite a reliable and functional cooler. We bought it for our office and can serve 8-10 people. There is an additional fixation to the floor against tipping over. Read more Read more
Ecotronic H1-LC
A classic floor-standing dispenser with a top-mounted bottle at a very reasonable price. The design of the model is quite laconic and stylish, and depending on the interior or individual preferences, the consumer is given the opportunity to choose from several body color options, where only the silver insert remains unchanged.
Ecotronic H1-LC is equipped with two convenient water supply taps in the “Mug Press” format, and it is convenient to store these same mugs in a special 16-liter cupboard. The type of cooling is compressor, and hence the good cold water capacity - 2 l/h. Despite the fact that for heating this parameter remains almost standard - 5 l/h.
If someone is more interested in a cheaper, more mobile (lighter in weight) and quieter model, there is an analogue with electronic cooling H1-LCE. But you need to understand that in this case the cooler will produce cold water much slower (0.6 l/h).
Main advantages:
- Exterior design;
- Effective work;
- Leak protection.
Minuses:
- There is no third tap for uncooled water;
- The warranty is only 12 months.
Models in the line:
- Ecotronic H1-LCE
9.4 / 10Rating Reviews Very good cooler, has been working in an office with 5 employees for a year now. Looks good, heats and cools water quickly. The cabinet really helps to avoid cluttering tables and shelves with dishes. The price is quite normal for a decent compressor cooler.
Aqua Work 16-L/EN
Floor-standing cooler for distributing hot and cold water, stable, easy to operate, with a heating power of 700 W, and a compressor cooling power of 90 W. The location of the bottle is top, inverted. Hot water capacity is up to 7 l/h, cold water capacity is at least 2 liters per hour. Pouring occurs by pressing the glass on the lever of the hot or cold water spout. Dimensions of the device: 31x31x96cm. Made in China, 2 year warranty.
Main advantages:
- Separate buttons for heating and cooling.
- Light indication of processes.
- Possibility to choose from several color solutions for the case (photo print on the front panel).
Minuses:
- No child protection.
- The lower part of the base is not used, but it would be possible to make a cabinet for glasses.
- Coolers with a compressor require correct installation on a hard surface, otherwise they can be quite loud during operation (according to customer reviews).
Models in the line:
- Aqua Work 16-L/EN-ST
– version with compressor cooling and turbo heating - Aqua Work 16-LD/EN – electronic cooling, simple heating
9.3 / 10Rating Reviews An impressive cooler that can handle a flow of 30 people a day in an office. The cup holder was purchased separately. Read more Read more
Rating TOP 10 best water coolers
Having processed a huge amount of information on this topic, we have created a list of the ten most popular models.
- Aqua Work 0.7-LKR.
- ABC V170.
- Smixx 16LD/E.
- Aqua Work 16-TD/EN.
- Ecocenter G-F4EC.
- Vatten L45WE/L45SE/L45NE.
- Vatten L49QEAT.
- Vatten V45WE/V45SE/V45QE/V45RE/V45NE.
- HotFrost V400BS.
- HotFrost 350ANET.
Below we will look at each of the presented options in detail.
Aqua Work 0.7-LKR
The cute floor-standing dispenser model has miniature dimensions. In the lower half of the case there is a cabinet with a capacity of ten liters, where you can put tea utensils and food. Water cooling is not provided here, but there is heating up to 96°C and water supply at room temperature. Perfect for home use.
Power | 700 W |
Dimensions | 85.5×29×30 cm |
Weight | 4.95 kg |
Heat | 90-96°С |
Price: from 3,700 to 4,450 rubles.
Aqua Work 0.7-LKR
Advantages
- compact dimensions of the device;
- there is a narrow cabinet with a transparent door;
- heats up to 7 liters per hour.
Flaws
- no water cooling.
Bought for home in case of water outage. We chose the small one because we have two small children at home and it will be more convenient for them to collect water. The cooler is excellent, sometimes it replaces a kettle for us, and in general it’s a convenient thing. It stood up in the kitchen as if it had always been there, it looks harmonious. We are very pleased.
ABC V170
The ABC V170 floor cooler is capable of meeting the water needs of a mid-sized office team. The device operates in cooling and heating modes. Indicator lights indicate the active mode.
The hot water tank is made of stainless steel and is therefore resistant to high temperatures and corrosion. The cold liquid reservoir is made of durable, hygienic plastic. Operating efficiency is ensured by the compressor type of cooling.
Dimensions | 85.7×30×31.5 cm |
Weight | 11.5 kg |
Heat | 420 W |
Cooling | 85 W |
Heating/cooling performance | 5/2 l/hour |
Approximate price: from 4,690 to 9,410 rubles.
ABC V170
Advantages
- capable of cooling and heating liquid;
- equipped with protection against accidental activation;
- stainless steel hot water tank.
Flaws
- not found.
It’s not a bad thing, it’s been in our office for about six months now. Whether you want to quench your thirst with cold water or want to pour some hot water for tea, everything is very convenient. There are no problems, it’s easy and simple to use. I’m already thinking about buying one for myself, it’s a useful thing.
Smixx 16LD/E
The classic, no-frills cooler is installed on the floor with the bottle placed on top. The hot water container with a volume of one and a half liters is made of stainless steel, which indicates the durability of the design.
The cold water tank is slightly smaller, but no less reliable, although it is made of plastic. The body of the device itself is metal, which allows the use of glass holders with screws or magnetic ones.
Heating/cooling power | 550/70 W |
Water temperature hot/cold | 90/15°С |
Capacity of hydrocarbon tanks | 1.5/0.8 l |
Dimensions | 31×31×96.5 cm |
Weight | 8 kg |
You will be interested in: TOP 10 best infrared heater: rating, which one to choose, characteristics, reviews, pros and cons
Price: 4,980 rubles.
Smixx 16LD/E
Advantages
- makes hot and cold water;
- you can install any glass holders;
- There are operation indicators on the front panel.
Flaws
- The lower part of the device is not used in any way, there is no cabinet.
I used this model at home for quite a long time. There’s nothing special to admire, but there’s nothing to criticize either. A good, reliable model performs its functions with a plus. I haven’t found any shortcomings in a couple of years, and it still works regularly at my brother’s house. Nice model, I recommend it!
Aqua Work 16-TD/EN
The compact dispenser can be used in the office and at home thanks to the ability to install it both on the floor and on a table. The thoughtful design allows you to get hot and cold water.
It can heat up to six liters in an hour. Water flows through two taps, color-coded at the touch of a mug. The steel body of the device ensures reliable fixation of magnetic cup holders or screws.
Operating temperatures | 90°C and 12°C |
Heating and cooling intensity | 700 W and 70 W |
Productivity per hour | cools 1 liter, heats 6 liters |
Weight | 3 kg |
Dimensions | 31×47×31 cm |
Price range: from 5,470 to 6,000 rubles.
Aqua Work 16-TD/EN
Advantages
- produces cold and hot water;
- at the back of the case there are switches for both types of water;
- There is a possibility of installation on a table.
Flaws
- not found.
It’s the simplest device, which is why I chose it; by the way, the design is also beautiful, it fits perfectly in my kitchen. I've been using it for six months without any problems or complaints. We quickly figured out the functions, even the children learned in a couple of minutes. There is nothing to break there, I think it will last for a long time.
Ecocenter G-F4EC
A standard set of functions and several color options at a fairly affordable price make this device very attractive. The stylish design of the device will look equally good both at home and in the office. In addition to heating and cooling, which can be turned off using buttons on the back wall, it also has a 16-liter cabinet that can easily accommodate tea accessories.
Chilled water tank | 0.7 l |
Heating and cooling energy | 500 W and 75 W |
Dimensions | 94×30×31 cm |
Weight | 6 kg |
Hot water capacity | 5 l/hour |
Price tag: 5,841 rubles.
Ecocenter G-F4EC
Advantages
- there is a light indication of operation;
- There is a storage cabinet at the bottom of the case;
- stylish design and four color options;
- Water is supplied by pressing the corresponding button.
Flaws
- not detected.
We bought it just for water, hot or cold doesn’t matter to me, but we tried everything, it seems to work properly. It heats even faster than a kettle. From the very beginning there was no strong smell of plastic, and what smell there was quickly dissipated. The unit is decent and well deserves its price.
Vatten L45WE/L45SE/L45NE
Large cooler with bottom bottle connection, designed for installation in offices and other public places. The design provides three taps: hot, cold and room temperature water.
Each mode has its own operation indicator. Water tanks are made of stainless steel. There is an accidental switching lock; the push-button control is located on the top of the device.
Productivity per hour | 6 l hot and 0.6 l cold |
Tank capacity | 1.1 l hot, 0.6 l cold |
Maximum temperature hot/cold | 90°С/15°С |
Operating power naked/cool | 650 W/70 W |
Weight | 9.95 kg |
Dimensions | 31×34×10.4 cm |
You will be interested in: Rating of the TOP 10 best electric fireplaces with flame effect: which one to choose and buy, reviews, price, characteristics
Price range: from 8,498 to 15,336 rubles.
Vatten L45WE/L45SE/L45NE
Advantages
- built-in child protection;
- there is an indication of operation;
- safe push-button water start.
Flaws
- not detected.
An easy-to-use cooler that does its job well. I bought it for a private home because I constantly need clean water. I am very pleased with the child protection feature, because the child often uses it and I am always sure that the cooler is safe. It takes up very little space in the kitchen and makes virtually no noise.
Vatten L49QEAT
An original model with a compartment for a bottle in the lower part of the body. Above the compartment there is a cabinet for cups, mugs and other paraphernalia. The peculiarity is that the cooler comes with a teapot and a kettle for hot water, and the liquid is supplied through a faucet similar to a sink faucet. Moreover, the infuser has a bed with a temperature maintenance function, and the second kettle is heated after double pressing the hot water button.
Power naked/cool | 1350 W/70 W |
Heating performance | 10 l/hour |
Cooling rate | 0.6 l/hour |
Dimensions | 83×40×40 cm |
Estimated cost: from 10,973 to 15,800 rubles.
Vatten L49QEAT
Advantages
- The unit comes with two kettles;
- capable of heating ten liters in an hour;
- the ability to constantly maintain the temperature of the teapot.
Flaws
- not found.
I use it at the dacha, my family is delighted. Fits perfectly in the kitchen, the water bottle no longer gets in the way and extra kettles are no longer needed. Cups, sugar and cookies fit perfectly in the cabinet. Even granny figured out the clear and convenient controls. I strongly recommend buying.
Vatten V45WE/V45SE/V45QE/V45RE/V45NE
A floor cooler can provide you with hot, cold and room temperature water. This functionality will be useful both for domestic use and in operation at various enterprises.
The operation of the device is accompanied by an indication of switching on, heating and cooling. The water container is placed on top, and the lower part is without a cabinet. The heated water start-up is equipped with child protection.
Dimensions | 98×31×43 cm |
Weight | 8.2 kg |
Heating | 6 l/hour |
Cooling | 0.6 l/hour |
Heating and cooling power | 650 W and 70 W |
Cost range: from 6,000 to 15,000 rubles.
Vatten V45WE/V45SE/V45QE/V45RE/V45NE
Advantages
- The hot water tap has a child lock;
- built-in operation indication;
- Storage tanks made of stainless steel are installed.
Flaws
- not found.
Excellent cooler, I bought it for home, I chose the black one. All my household appliances are like this. It turned out great, fit into the interior like a glove. It also works like an A, there is always the water you want. Very comfortably! Beautiful, functional and useful thing. I recommend it.
HotFrost V400BS
The body of the model is made in a strict, laconic gray design. The liquid is supplied by pressing the desired button on the top panel of the device. The bottle is installed on top, and a refrigerator compartment for drinks is equipped at the bottom. Three taps are installed; the hot one is blocked from accidental activation.
Weight | 19.2 kg |
Hydro power | 650W/100W |
Dimensions | 100×31×35 cm |
Speed | 5.5/2 l/hour |
Approximate prices: from 17,550 to 24,263 rubles.
HotFrost V400BS
Advantages
- the device is equipped with a refrigerator;
- there is a removable tray for collecting drops;
- safe push-button filling control.
Flaws
- not detected.
It took me a long time to choose a cooler for my new apartment! I immediately decided that I needed to take the bottom loading one - it makes life incredibly easier. This cooler heats up great! Guests are on the doorstep - I turn on the kettle, while the table is set, the water has already boiled! By the way, the volume of the tanks is also good. I really like that the hot key has child protection.
HotFrost 350ANET
A high-tech device with a champagne-colored body combined with black. Control takes place on a waterproof touch panel. Water containers are installed in a box at the bottom of the case, thereby protecting them from mechanical stress and ultraviolet rays. A liter teapot is supplied with the device. Cooling is carried out thermoelectrically and is almost silent.
You may be interested in: TOP 10 best vertical vacuum cleaner: rating, how to choose, characteristics, reviews, pros and cons
Intensity | 8 l/hour hot and 0.6 l/hour cold |
Weight | 12.7 kg |
Dimensions | 114.4×35.9×36 cm |
Power | 1100 W heating, 75 W cooling |
Variety of prices: from 21,990 to 26,370 rubles.
HotFrost 350ANET
Advantages
- a kettle is included in the kit;
- simple touch panel controls;
- equipped with child protection;
- Built-in removable tray for drops.
Flaws
- not found.
Cool cooler, very convenient, we use it in the office. There is a kettle in the cooler, which is always warmed up, which is very convenient, and if you need to pour water for someone, you don’t have to go with each mug, you just take the kettle and pour it. And bottom loading - no need to lift the bottles up. Cool stuff.