The washing machine takes in a lot of water: reasons

Published: 17 Nov 2020

You threw in your things, turned on the washing machine, but instead of working normally, the machine filled almost half the tank, did not wash, turned on the drain, and then stopped the program.

You don't understand why the washing machine pours a lot of water and doesn't wash. Sometimes a hint appears on the display in the form of an overflow error. Sometimes the SMA just stops silently after draining the water.

How to determine if there is a malfunction

If the flow of water does not stop after the tank is full, this usually leads to the following consequences:

Water injection continues. The tank is more than half full.
The water level sensor detects that there is too much water and gives a command to drain it.
The drain pump starts working and eventually only laundry remains in the tank.
Then an emergency stop of the washing machine occurs due to the inability to continue working.

The following situation should not be confused with the situation described here:

There is a constant injection of water;
At the same time, pumping works.

At the same time, the liquid level in the tank remains within normal limits.

Why does the washing machine overflow or not add water to the tank?

Is your washing machine overflowing? Not the best behavior of a home assistant, which can lead to flooding of neighbors, or failure of the electronics of the device. Among the reasons are:

Incorrect connection of the device to the sewer, especially if it was carried out by people without special knowledge and skills.
Problem with the water level sensor.
Inlet valve failure.
Valve contamination.
Violation of the tightness of the water control system.
Malfunctions of the electronic control unit.

The main thing is not to put off repairs for a long time, otherwise there will only be more unresolved problems, and the repair budget will only grow. Therefore, at the first sign of a breakdown, stop the washing program, drain the water using a special drain and spin program on your mile machine, use the emergency drain method: using a special hose located next to the drain pump filter. After an emergency shutdown of a household appliance, a specialist is required.

Incorrect connection to water supply and sewerage

When buying a new machine, many people do their own installation of the device to the water supply and sewerage system. This is why so many problems arise: flooding of neighbors, failure of equipment. You should not skimp on the correct installation of a home assistant. After all, the correct operation of the device depends 85% on the quality of the connection.

When installing the washing machine correctly, the drainage hose should be attached to the sewer pipe or siphon at a height of 60-70 cm from the floor. Does the washing machine take up liquid immediately after installation? Checking the connection details.

Another test can be performed to indicate connection deficiencies. Start the laundry program. When the machine starts draining water, press pause. We observe: if the water continues to drain, then the problem is in the installation of the machine. Call a technician to properly reinstall your washing machine.

What you can do yourself

If such a problem occurs, there is a possibility that it is a random hardware failure. To check this, you need to turn off the washing machine, wait a few minutes and turn it on again.

If the uncontrolled collection of water continues, it is necessary to turn off the machine and drain the collected water. The latter can be done using standard means by clicking on the corresponding button on the control panel. If this cannot be done, you can use a hose for emergency draining.

The control module is broken

Failure of the electronic control board can occur for various reasons:

network voltage jumps;
high humidity in the room, etc.

Due to a malfunction of the control module, problems may arise not only with water overflow, since in fact this board is the “brain” of your washing machine. In the situation we are considering, the command from the control board to stop water intake is not executed, so the flow into the drum does not stop. After the water overflows, it is drained and the washing program stops; the LEDs on the control panel may begin to flash and show an error. A broken control board will have to be taken to a workshop or replaced with a new one.

Washing machine control module

Such a breakdown is a rare occurrence, and Asian brands like Samsung are more susceptible to it. Original assemblies of European brands (for example, Italian Indesit) are more resistant to the influence of the adverse factors described above.

Types of breakdowns

If restarting does not fix the problem, then we are talking about a malfunction of one of the components of the washing machine. The most common reasons are related to malfunctions of the level sensor. This happens in 90% of cases.

The level sensor does not have the ability to determine the water level directly. Since the washing machine tank rotates during operation, the amount of water is determined using pressure measurements.

This sensor is called a pressure switch. When a sufficient volume of water accumulates in the drum, it is triggered and further flow is blocked.

For example, contacts in it can burn and oxidize. Sometimes failure to operate occurs because the membrane has lost its seal. Only a technician can determine why the problem occurred.

Sometimes the problem is caused by particles of rust or debris entering the valve along with water from the water supply. However, other reasons are also possible.

The following describes in detail what needs to be done in various cases.

In case of excessive intake and complete drainage of water

In this situation, excessive water enters the drum and is completely drained. In some cases, the machine gives a signal indicating a breakdown.

There could be several reasons:

The problem is due to a faulty pressure switch sensor tube. It may have become loose, damaged, or clogged. In this case, it is possible to carry out repairs yourself, eliminating the cause of the breakdown. The valve continues to operate normally.
When the pressure switch chamber became clogged with debris. If you clean it, the machine will work normally.
If the sensor that detects the water level fails. In this situation, you need to contact specialists for repairs.
Sometimes the reason that the washing machine takes in a lot of water and does not wash is a non-functioning control device. If you contact the service department, such a breakdown will be corrected.

Water is gathering and it doesn’t stop

If the sensor does not respond and water flows in, then the most likely cause is a faulty fill valve. In a situation where it is jammed, it cannot shut off the water.

This valve is an electronic device. When voltage is applied to it, it opens and water begins to flow into the washer from the water supply. When the pressure switch (level sensor) determines that the machine is ready for washing, the fill valve is de-energized and the flow stops. If normal operation is disrupted, it does not stop the flow of water. In this case, the built-in protection will not work and water may spill out due to a faulty valve. This may cause damage to electronic components exposed to water.

In order to cope with this problem, it may be necessary to replace the valve.

Incorrect connection when installing the machine

If during installation the drain hose is not installed in the loops provided for it on the body, then water will flow uncontrollably through the drain hose into the sewer. In this case, the washer will constantly not have enough water. This will cause a lot of water from the mains to flow through the inlet hose and inlet valve.

Because of this, additional loss of washing powder will occur. Because the water actually becomes running due to constantly open valves, the machine does not heat the water to the optimal temperature for washing.

Usually this reason occurs during the first time after purchasing and installing the washing machine.

To check what is causing the problem, you need to do the following check:

You need to start the car.
When the water has completely filled, you need to turn on the drain.
While it continues, you need to press pause and see what happens.

If the drain continues after stopping, this indicates an incorrect connection. Otherwise, the problem is a breakdown of one of the components or sensors of the machine.

Samsung washing machine does not spin or drain water, what should I do?

Owners of Samsung washing machines may encounter a problem when the device suddenly stops draining water and spinning clothes. Moreover, no manipulations with turning it off and on, or pulling the cord out of the outlet help.

In this case, you need to check whether the mode was selected correctly. For example, if a delicate mode was selected for washing woolen items or curtains, then it does not include a spin cycle. This is done so that things do not wrinkle or stretch.

If you find that the mode is selected correctly, then the next step is to check the drain hose. It may be squashed or kinked, preventing water from draining down the drain.

If everything is fine with this, then check if there are any problems with the siphon (if a hose is connected to it) and the sewerage system. This is done in this way: the hose is disconnected from the siphon and hung into the bathroom, then any mode is turned on.

If water begins to flow out of the hose, then the problem is in the sewer - it is clogged.

If all of the above manipulations do not produce positive results, then the washing machine is broken. You can already call washing machine repair in Kharkov, or you can try to figure out the problem yourself. First you need to remove the laundry from the drum. To do this, you need to drain the water from the drain filter. This is done manually. It is recommended to place a tray under the machine to prevent water from spilling onto the floor when it flows out.

The most common breakdowns

Most often, the following breakdowns occur in Samsung washing machines:

clogged pipe or water filter;
pump malfunction;
malfunction of the programmer or control module;
problems with the water level sensor.

The owner of the washing machine can identify these faults, but it is best to entrust the repair of washing machines in Kharkov to professionals. Otherwise, you can only harm the equipment. Most often, the drain in the washing machine does not work due to a clogged filter.

It is located under the drain pump and traps threads and various small objects. If it becomes very clogged, water will not be able to pass through it. Therefore, you need to unscrew the filter and clean it. But if the pipe becomes clogged, it is better to have it cleaned by a specialist, since it will be necessary to open the housing of the unit.

You will need to drain the water from the pipe and check for debris.

Malfunction of the pump and control sensor

When a Samsung washing machine suddenly stops draining water, but the electronic display does not display an error and starts washing, then the problem may be in the internal wiring of the device. In this case, specialist intervention is needed.

He will open the top of the case and check the power wiring with a special tool. If the wiring is OK, then most likely the pump has burned out. It looks like a small carousel that rotates quickly and thus throws water into the sewer.

The technician can change it and then the machine will again be able to wring out wet things.

In Samsung electronic washing machines, the control module may fail. This means that the board does not receive information about draining water from the board to the pump motor. In this case, you cannot do without a specialist. In models with electromechanical control, the programmer may break down. There are different reasons why the control module fails:

manufacturing defects;
short circuit;
depreciation of equipment;
sudden changes in voltage.

Also in washing machines there may be problems with the water level sensor. If it breaks, the device will not drain water. The control module will receive a signal that the water has been drained from the machine, so the program can be completed. In this case, the technician from the washing machine repair service in Kharkov can replace the sensor with a new one and the problem will be solved.

If you are unable to resolve the problem yourself

The owner of a washing machine can practically only make sure that the problem when the washing machine takes in too much water is not an accidental failure of the control system. If the malfunction of the machine is definitely established, it would be a reasonable decision to call a technician from the service department.

He will be able to determine the breakdown only after inspecting the car. After the water is drained from the washer, he will have to disassemble it. He will need to inspect the sensors, the intake valve. After analyzing the situation, he will decide what repairs are needed in this situation.

Its cost should include the cost of work and the price of those components and parts that will have to be replaced. It is best to contact those specialists who will not only fix the breakdown, but also provide a guarantee.

Pressostat

This device detects the water level, and when it reaches the value corresponding to the washing cycle, a signal is sent to the control module. Which, in turn, turns off the valves and water stops flowing into the machine.

A faulty sensor does not determine how full the tank is. As a result, water flows continuously. The pressure switch rarely breaks!

Breakdown may occur over time. The inner membrane has hardened and lost its ability to bend. In this case, replacement with a working one is necessary.

Expert opinion

Sometimes the contacts oxidize and the signal does not pass through. After cleaning, you need to check the functionality.

The rubber tube may also become clogged or cracked. After replacing or cleaning, the problem will disappear.

One option is an electronic pressure switch

The washing machine overflows water when washing

Modern machines are not afraid of overflowing water; as a result, the electronics will not fail, as some non-professionals fear, and the neighbors will not flood. The machines that are bought today are equipped with an overflow system: if a larger volume of water enters, the system stops the water intake, and error information lights up on the electronic display. For domestic washing machines of an earlier production date, overflow was more dangerous, since there was no such protection. If the overflow occurred for the first time, then perhaps you should not be afraid of a one-time failure of the electronic control module. Try unplugging the machines for a few minutes and then just turning them on again.

Nothing succeeded? Reboot didn't help? In 80% of cases, the cause of overflow is a faulty water level sensor. It is better to entrust repairs to a professional service technician.

Breakdown of the pressure switch

Pressostat is an element that controls the volume of water entering the tank. When water is collected, the volume reaches certain values, the pressure switch is activated and the collection ends. If the sensor is faulty, the water overflows. The reason why the machine takes a lot of water and does not stop dialing in time lies in burnt or oxidized wires. In addition, the membrane installed in the sensor loses its seal over time. An experienced service technician will accurately diagnose the problem and fix it. The breakdown occurs in car models of different brands, including Ardo, Zanussi, Electrolux, Beko and others.

Malfunction of the filler (inlet) valve

Often the fill valve becomes unusable due to natural wear and tear of the part. Another reason is contamination of the inlet filter with particles of dirt and rust that come from the water supply. Moreover, the quality of our water in many regions leaves much to be desired. Small particles and sediment remain on the valve, and as a result it cannot close completely and the machine cannot stop the water supply.

It is recommended to immediately replace the faulty element with a new one. It is not recommended to wash with a broken water level sensor.