Your own sewage pump in summer cottages will not be superfluous, since most of them do not have a centralized sewerage system. Many villages also do not have sewer outlets, and all sewage and flood waters go either into drainage pits and septic tanks, or into street toilets, which need to be cleaned somehow.
This is where such a unit comes in handy.
To help you choose, we have compiled for you a rating of the best fecal pumps from various manufacturers in terms of price/quality ratio.
When selecting models, we took into account the ratio of cost, quality, performance, as well as the opinion of experts and users, and Rosstat statistics. Here you will find only the best fecal pumps.
Rating of the TOP 15 best fecal pumps of 2020-2021
| Place | Name | Price |
| TOP 5 best fecal pumps for pumping out sewerage by price/quality for 2021 | ||
| 1 | GILEX Fecal 330/12 (1200 W) | Find out the price |
| 2 | JILEX Fekalnik 260/10 N (800 W) | Find out the price |
| 3 | VORTEX FN-2200L (2200 W) | Find out the price |
| 4 | VORTEX FN-250 (250 W) | Find out the price |
| 5 | BELAMOS DWP 1300CS | Find out the price |
| TOP 5 best inexpensive fecal pumps | ||
| 1 | JILEX Fekalnik 230/8 (590 W) | Find out the price |
| 2 | CALIBER NPTs-1400U (Aqua Line) (1400 W) | Find out the price |
| 3 | GILEX Tugunok 140/6 (250 W) | Find out the price |
| 4 | JILEX Fekalnik 200/7 N (450 W) | Find out the price |
| 5 | JEMIX GS 400 (400 W) | Find out the price |
| TOP 5 best powerful drainage pumps | ||
| 1 | Pedrollo BCm 15/50 (MCm 15/50) (1100 W) | Find out the price |
| 2 | VORTEX FN-1100L (1100 W) | Find out the price |
| 3 | VORTEX FN-1500L (1500 W) | Find out the price |
| 4 | UNIPUMP FEKACUT V1300DF (1300 W) | Find out the price |
| 5 | CALIBER NPC-1100U Aqua Line (1100 W) | Find out the price |
The best manufacturers - TOP-8
We present the top 8 companies producing fecal pumps with grinders for cesspools.
Gilex
The company Gilex presents the “Fekalnik” line, there are models made of stainless steel and impact-resistant plastic. The maximum diameter of solid inclusions is 35 mm.
- Price
- 3009 - 6700 rub. - Power
- 250 - 1200 W. - Country of origin
: Russia
Gilex fecal pump
| pros | Minuses |
| price | plastic impeller. |
| low noise level | inability to pump dry |
| pumping speed | |
| low energy consumption | |
| good pressure | |
| long cable |
Caliber
A lot of equipment is produced under the “Caliber” brand; the company supplies sprayers and garden branch shredders for dachas or country houses.
- Price
- 3400 - 10580 rub. - Power
- 750 - 1400 W. - Country of origin
: Japan
Caliber fecal pump
| pros | Minuses |
| performance | short power cord |
| pumping speed | |
| low noise level | |
| quality |
Quattro Elementi
Devices from this company are capable of pumping liquids with inclusions up to 20 mm.
- Price
- 4835 - 12990 rub. - Power
- 250 - 1700 W - Country of origin
: Italy
Quattro Elementi fecal pump
| pros | Minuses |
| strength | weight |
| performance | small particle size |
| low noise level | shallow immersion depth |
| reliability | |
| compactness |
Grundfos
Grundfos company specializes in the production of circulation, submersible, centrifugal pumps, pumping motors and their components.
- Price
- 64306 - 204266 rub. - Power
– 990 – 5200 W - Country of origin
: Denmark
Grundfos fecal pump
| pros | Minuses |
| security | price |
| strength | weight |
| remote control | |
| adjustable clearance | |
| long power cord |
SFA
The SFA company produces sewerage installations; fecal pumps are represented by one model - SANIPUMP, which has earned the trust of users.
- Price
- 33317 - 39390 rub. - Power
- 1500 W. - Country of origin
: France
SFA fecal pump
| pros | Minuses |
| pumping speed | price |
| low noise level | |
| small size | |
| high quality shredder | |
| doesn't clog | |
| easy installation |
Pedrollo
The Pedrollo company has a large selection of units from household to industrial models.
- Price
- 16227 - 105524 rub. - Power
– 550 – 4000 W - Country of origin
: Italy
Pedrollo fecal pump
| pros | Minuses |
| thermal protection | price |
| anti-corrosion materials | weight |
| immersion depth from 0.8 to 10 m | |
| 2 year warranty |
Vortex
Vikhr offers devices with a chopper in the L series - these are the Vikhr FN-1000L, FN-1100L, FN-1500L and FN-2200L models, the remaining models are not equipped with a cutting element.
- Price
- 5045 - 14120 rub. - Power
- 250 - 2200 W. - Country of origin
: China
Vortex fecal pump
| pros | Minuses |
| hull strength | weight |
| performance | difficulty of installation |
| low noise level | short power cord |
| compact | lack of overheating protection |
| pressure |
How to choose a fecal pump for pumping out sewage?
In order not to make a mistake with your purchase and not to take a pump that is too powerful, too weak or unsuitable for operating conditions, you must first understand what such units are needed for.
Sewage pumps are used to clean drainage drains, septic tanks, cesspools, remove flood water from basements and cellars, and empty wells.
They are equipped with filters that allow particles of certain diameters to pass through.
When choosing a model, you should pay attention to the following parameters:
- type of installation - submersible ones are lowered directly into a septic tank or pit, surface ones are installed near storage manifolds and are used to transport masses from a depth of no more than 7-9 m;
- pump type - drainage is designed for contaminated water with small particles, while fecal pumps can pump viscous media with large inclusions. Fecal models are often equipped with cutting elements;
- case material - models are mainly supplied with plastic cases, they are easy to maintain, lightweight, reliable, but there are models with cast iron or steel cases. Metal cases can react with some components of bioreagents, so such models should be used with caution;
- immersion depth - depends on the depth of the pit or septic tank, the parameters must correspond to each other;
- the presence of a grinder is optimal for using the pump in outdoor toilets, cesspools and drains with solid components.
The best surface fecal pumps
Before purchasing a surface faecal drain, the consumer needs to decide on the room in which it will be installed. This is the main disadvantage of the device. But servicing the pump will be very convenient. Experts paid attention to several products.
SFA SANIACCESS 3
Rating: 4.9
You can quickly organize a drainage system from the toilet using the SFA SANIACCESS 3 surface pump. The model was created using high-quality materials and advanced technologies. Therefore, the uninterrupted operation of the sewerage installation is guaranteed by the manufacturer for 3 years. The technical parameters look decent; the pump can lift sewage to a height of 5 m and move it horizontally up to 100 m. At the same time, the throughput of the unit reaches 4.8 cubic meters. m/h. Thanks to the shredding system, toilet paper and dirty water will be removed from the toilet along with feces.
Consumers vote with their rubles for easy installation, quiet operation and compact dimensions. The only drawback that did not prevent the product from becoming the winner of the rating was the high price.
Advantages
- silent operation;
- ease of installation;
- hassle-free service;
- unpretentiousness.
Flaws
- high price.
TOP 5 best fecal pumps for pumping out sewerage by price/quality for 2021
GILEX Fecal 330/12 (1200 W)
The submersible model is one of the most practical choices for a summer residence . The pump is suitable for
pumping drainage and rainwater with organic inclusions with a diameter of no more than 37 mm.
Equipped with a float switch that automates the work process and saves energy.
Under heavy loads and high temperatures, the thermal relay is automatically activated. Excess of the system in the air is removed using a special valve.
In addition to standard applications, the pump copes well with pumping water from swimming pools, wells, tanks, gutters and basements.
Due to the design features, the model imposes requirements on the liquid temperature - no more than 35 degrees.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 19.8 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- low energy consumption;
- low noise level;
- protection against idle operation and overheating;
- power and throughput.
Minuses
- The size of the connecting hoses is incorrectly indicated in the documentation.
JILEX Fekalnik 260/10 N (800 W)
Robust and reliable pump with stainless steel housing provides good flow capacity and pressure.
The float system reliably protects against idling and guarantees full automation of the pump operation.
The engine is equipped with a cooling system to protect against overheating; if the temperature is significantly higher, a thermal protection relay is activated.
It is possible to connect several types of hoses depending on the pumped liquid.
It copes well with draining wells and water reservoirs and will create pressure in the system for watering vegetable gardens or orchards. Valued by users for its reliability and versatility of use.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 15.6 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- automatic operation;
- idle protection;
- engine protection;
- versatility.
Minuses
- not equipped with a chopper.
VORTEX FN-2200L (2200 W)
One of the most powerful fecal pumps in the company's line . Due to presence in
The design of the shredders can be used for pumping out liquids with a high degree of contamination.
Additionally, it can be used for draining basements and cellars, basements, wells and swimming pools.
Placement is possible either on a special platform or suspended on a cable. Protected from idle operation and overheating.
Works out of the box - no need to upload or configure.
An important point is that the device should not come into contact with chemicals, therefore, it is not suitable for cesspools that have been previously cleaned with septic tanks.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 30 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- durable body;
- power;
- overheat protection;
- works out of the box.
Minuses
- not suitable for technical waste.
VORTEX FN-250 (250 W)
A simple and economical pump that provides good flow capacity.
Equipped with an asynchronous motor with overheating protection and a centrifugal pump with impeller wheel and float system.
Passes particles up to 27 mm in diameter.
Operates at a liquid temperature of no more than 35 degrees due to plastic parts in the design.
Can be used for draining wells, water tanks, car washes, and to create pressure at irrigation facilities.
Contact with aggressive chemical compounds is undesirable. It is not equipped with a grinding blade, so it is not suitable for cesspools.
Specifications:
- Type: submersible;
- Immersion depth: 9 m;
- Throughput: 9 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- reliability;
- energy efficiency;
- performance;
- ease of operation.
Minuses
- may jam.
BELAMOS DWP 1300CS
An excellent pump for removing liquids from cesspools with large inclusions up to 25 mm.
The cast iron body is resistant to temperature changes, and its strength allows the pump to be used in the most difficult conditions - for pumping industrial wastewater, sewage water, water with fibrous inclusions, draining flooded basements and cellars.
The scope of application is practically unlimited - the model performs well both in domestic conditions and on construction sites, car washes, and various tanks.
Successfully copes with viscous liquids. Resistant to corrosion, overheating, protected from idling thanks to the float system.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 18 cubic meters/hour;
- Body: cast iron;
- Installation: vertical.
pros
- presence of shredders;
- metal case;
- performance.
Minuses
- Doesn't pump out completely.
When is a fecal pump used?
A distinctive feature of fecal pumping equipment from other devices pumping liquid is the ability to move water with a large number of impurities and inclusions. Some models cope with mud particles larger than 5 cm. In addition, sewage is an aggressive environment, so the elements of fecal pumps in contact with the pumped liquid are made of corrosion-resistant materials.
The fecal submersible pump is equipped with a flexible hose equipped with a locking adapter
This endurance allows this group of pumping equipment to be used for various purposes:
- pumping water from cellars and basements in case of flooding due to a burst of sewerage, water supply or rising groundwater;
- drainage of storm sewer collectors;
- cleaning or draining small bodies of water;
- arrangement of a forced sewer system if it is impossible to maintain the slope and to avoid clogging of sewer pipes;
- emptying a filled cesspool.
Placing a fecal pump with a grinder inside a cesspool
The last point is the most common use of fecal pumping equipment in everyday life. Moreover, models equipped with a chopper are suitable for these purposes.
TOP 5 best inexpensive fecal pumps
JILEX Fekalnik 230/8 (590 W)
Submersible pump for pumping both clean water from tanks and groundwater, drainage, sewage water and liquids with inclusions up to 35 mm in diameter.
Convenient for construction and household work, when pumping large volumes of water.
The device does not have the highest throughput, but can easily withstand long-term loads.
The engine is equipped with self-lubricating bearings, extending the life of the unit and its operating time.
The float system protects against idling and saves energy.
Thanks to the plastic housing, the pump is easy to move and transport, but the plastic housing is easy to damage if used carelessly. There is also no shredder.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 13.8 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- mobility;
- performance;
- self-lubricating bearings;
- long service life.
Minuses
- unreliable body.
CALIBER NPTs-1400U (Aqua Line) (1400 W)
Pump for pumping rain and groundwater, draining gutters, swimming pools, wells, drainage pits.
Passes particles up to 40 mm, is not equipped with cutting elements. Optimal for household tasks, pumping sewerage in private or country houses.
Works almost silently, provides good pressure and performance.
It can also be used in car washes and for pressure in irrigation systems in gardens and vegetable gardens.
However, users note that the pump often becomes clogged even if there are inclusions in the water that are allowed by the technical characteristics of the device.
Specifications:
- Type: submersible;
- Immersion depth: 7 m;
- Throughput: 24.96 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- pressure;
- low noise level;
- price.
Minuses
- clogs quickly.
GILEX Tugunok 140/6 (250 W)
Small in size and power pump for pumping liquids from drainage pits, septic tanks, shallow wells and water tanks.
It is not equipped with a knife, it only allows particles with a diameter of no more than 32 mm to pass through, so it is not suitable for outdoor toilets.
Does not cope very well with silty masses in septic tanks and thick masses in drainage pits.
Shows itself well as a well pump for draining basements, cellars, ground floors.
Easy to operate and maintain, repairable on your own.
In addition, the model features low noise and low power consumption..
The light weight and dimensions allow the unit to be quickly redirected and reconfigured if necessary.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 8.4 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- efficiency;
- low noise level;
- protection against idle operation and overheating;
- Corrosion resistant;
- long service life.
Minuses
- the filter clogs quickly;
- not for drainage pits;
- does not pump out sludge from septic tanks well.
JILEX Fekalnik 200/7 N (450 W)
An inexpensive submersible pump with a stainless steel body will ensure long-term operation both in a single session and in general.
It has good performance; it can be submerged to a depth of up to 8 m, which allows it to be used both for septic tanks or cesspools without reagents, as well as for deep tanks and wells.
Thanks to the housing, it can be placed in water for a long time and used to create pressure in irrigation systems, in vegetable gardens or orchards for watering crops.
It is not equipped with a grinder, so it can hardly cope with thick masses.
The float mechanism protects against idling, and the engine is protected from overheating. Suitable for use for both domestic and construction needs.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 12 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- low energy consumption;
- stainless steel housing;
- protection against idle operation and overheating;
- reliability;
- long service life.
Minuses
- not for septic tanks with bioreagents.
JEMIX GS 400 (400 W)
Small sewage pump for shallow cesspools, pumping out liquids from flooded basements and basements, draining groundwater and flood water, and draining tanks.
Availability and ease of use are ensured by low cost, lightweight plastic case, and a float mechanism that protects against dry running. Designed for a long period of operation.
Despite its low power and throughput, it does an excellent job of automating the pumping of liquids with impurities and inclusions up to 35 mm in diameter.
Economical in terms of energy consumption.
Completely ready for use out of the box, and also repairable on your own, since the case is easy to open with ordinary tools.
Specifications:
- Type: submersible;
- Immersion depth: 5 m;
- Throughput: 7.5 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- efficiency;
- ease of maintenance and repair;
- price;
- long service life.
Minuses
- low throughput.
The best submersible sewage pumps
Submersible pumps are ideal for quick installation. It is enough to connect the hose to the pipe, lower the pump into the sewer drain and turn on the device to pump out the liquid. Experts praised the performance of the following models.
SFA SANIPUMP
Rating: 4.9
The SFA SANIPUMP submersible pump is designed for pumping fecal wastewater from sedimentation tanks and septic tanks. The device is characterized by high productivity; in an hour you can pump up to 11 cubic meters. meters of sewage. In this case, the pressure reaches 14 m. The device is equipped with a grinding system that prevents clogging and blocking of the holes. The cutting mechanism copes not only with organic matter, but also with toilet paper and rags. The light weight of the unit (13 kg) has a beneficial effect on the ease of installation and fastening, and stability during operation. The model deservedly becomes the winner in our rating.
Users give flattering comments about the pumping speed, compact size, ease of use, and low noise. The only downside is the high price.
Advantages
- good performance;
- grinding system;
- lightness and compactness;
- ease of use.
Flaws
- high price.
TOP 5 best powerful drainage pumps
Pedrollo BCm 15/50 (MCm 15/50) (1100 W)
A powerful premium pump produces one of the highest throughput and pressure values, passes particles up to 50 mm, but immersion is allowed no more than 5 meters.
The pressure power is provided by a two-channel stainless steel impeller.
The motor winding is perfectly insulated by a double seal with an intermediate oil chamber.
All parts, except the housing, are made of stainless steel, which will ensure a long service life of the pump.
The control is automatic due to an external float switch, which additionally provides protection against dry running.
Specifications:
- Type: submersible;
- Immersion depth: 5 m;
- Throughput: 48 cubic meters/hour;
- Body: cast iron;
- Installation: vertical.
pros
- sealing;
- decent performance;
- Corrosion resistant;
- long service life.
Minuses
- price.
VORTEX FN-1100L (1100 W)
Domestic pump, designed specifically for Russian conditions, while having high performance.
It is quite sufficient for working with cesspools of standard volume. Equipped with a powerful motor with thoughtful overheating protection, and a stainless steel case guarantees a long service life.
Equipped with a grinding attachment that crushes large fractions to the required size.
The protection of the main elements is provided by a classic float mechanism.
With a relatively low throughput it gives good pressure and can be used for irrigation systems, drainage of swimming pools, wells or flooded basements.
Specifications:
- Type: submersible;
- Immersion depth: 9 m;
- Throughput: 14 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- assembly reliability;
- efficiency;
- pressure
Minuses
- Knives rust quickly.
VORTEX FN-1500L (1500 W)
Excellent pump in terms of performance at an affordable price - high throughput, excellent pressure, powerful motor, protection against overheating and dry operation, economical energy consumption.
Equipped with cutting elements that crush particles to the required size.
The float switch protects against dry running and ensures full automation of the entire pump operation..
The durable stainless steel and cast iron body will last for a long time. However, the model is sensitive to liquid temperatures - no more than 35 degrees - due to plastic parts.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 24 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- low power consumption;
- reasonable cost;
- strength;
- long service life.
Minuses
- the impeller and knives quickly rust;
- The side fitting is inconveniently located.
UNIPUMP FEKACUT V1300DF (1300 W)
Almost silent, unpretentious pump for draining sewage water and wastewater without large fibrous inclusions.
Passes particles with a diameter of up to 30 mm. Well suited for draining septic tanks, water tanks, basements, ground floors.
Works on a reliable float mechanism, which simultaneously provides protection against dry operation and full automation of the entire system.
The kit includes a cable for hanging and a fitting for attaching a sleeve. The cutting attachment crushes inclusions to the required size, preventing clogging of the pump.
Easy to maintain and install, but not suitable for water containing abrasive particles, metal shavings, seawater or flammable mixtures.
Specifications:
- Type: submersible;
- Immersion depth: 5 m;
- Throughput: 18 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- unpretentiousness;
- low noise level;
- protection against idle operation and overheating;
- ease of operation.
Minuses
- price.
CALIBER NPC-1100U Aqua Line (1100 W)
A productive drainage pump with a centrifugal mechanism is easy to use, lightweight and easy to maintain..
Passes particles with a diameter of up to 40 mm, suitable for cesspools with liquid contents, septic tanks, as well as draining wells and water tanks.
Not suitable for pumping thick masses, which must be taken into account when using the pump to clean toilet pits or clogged septic tanks.
Can be used to drain flooded rooms, copes well with groundwater and melt water.
Light weight makes it easy to move the pump if necessary - the plastic housing is reliable and resistant to damage.
The long power cord is an additional plus.
Specifications:
- Type: submersible;
- Immersion depth: 7 m;
- Throughput: 20 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- efficiency;
- performance;
- protection against idle operation;
- resistant to bioreagents;
- long service life.
Minuses
- not for thick masses.
Pedrollo BCm 15/50
Main characteristics:
- Maximum head - 16 m;
- Capacity - 48 cubic meters. m/hour;
- Power consumption - 1100 W.
Frame. The body and main parts are made of cast iron and stainless steel, which allows the pump to be operated in a chemically aggressive environment with abrasive inclusions.
Engine. A single-phase electric motor with built-in thermal protection consumes 1100 W, which is enough to pump out a viscous mixture in an amount of 48 m3/hour. This flow rate corresponds to a discharge pipe diameter of 2½'. To eliminate the option of operating in dry mode, the pump is equipped with a float switch that opens the power circuit when the liquid level drops to a critical level.
Water pump. The double impeller of the pump creates a fairly large pressure of 15 meters and successfully replaces the chopper. The removable cover allows you to quickly access the pump for inspection or cleaning in case of clogging.
Device Pedrollo BCm 15/50.
1. Pump housing. 2. Pump base. 3. Impeller. 4. Motor housing.
5. Engine cover. 6. Motor shaft. 7. Double mechanical mechanical shaft seal with intermediate oil chamber.
8. Bearings. 9. Capacitor. 10. Electric motor. 11. Power cable. 12. External float switch.
Application. The design of this model is designed for immersion in water to a depth of 5 meters, so the length of the power cable is 10 meters. The pump is designed for pumping fecal matter and other liquids with a temperature not exceeding 40°C. The diameter of solid particles should not exceed 50 mm. With a width of 250 mm and a height of 450 mm, it easily fits into a standard size inspection hatch.
Watch the product video
Pros of Pedrollo BCm 15/50
- Quality materials.
- Reliable shaft seal.
- High performance and fairly high pressure.
- Low noise level.
- Protection against dry running and engine overheating.
Cons of Pedrollo BCm 15/50
- Heavy.
- Expensive.
Which company should you choose?
Pumps are supplied to the Russian market by a considerable number of companies, both domestic and foreign.
Among them we can highlight:
- Gilex is a domestic manufacturer that supplies affordable equipment of acceptable quality. The line includes both professional units and pumps for domestic use. It produces models with plastic and steel cases, lightweight, sealed, with reliable thermal protection and ease of maintenance and repair;
- Herz is a German manufacturer whose models have increased wear resistance and a long service life. Their main feature is the ability to work even in extreme conditions. Some models have increased power - up to 260 liters of liquid per minute. The cases are made of cast iron, the parts are made of steel, so the models are quite heavy;
- Vikhr is another Russian manufacturer that has proven itself well in the market. Many models are equipped with shredders, so the units are in high demand. The bodies are made of cast iron, and the chopper blades are made of high-strength steel. Models are capable of pumping up to 24 cubic meters of liquid per hour.
