Any washing machine can fail, especially if it has been in service for more than one year. After the warranty period expires, most amateur craftsmen try to fix the problems themselves. Often, in order to carry out repairs, you have to look for the cause of the breakdown, and for this you have to get to the internal parts.
Often, in order to carry out repairs, you have to look for the cause of the breakdown, and for this you need to get to the internal parts
How to disassemble a Samsung washing machine with your own hands, what is needed for this and what is the sequence of actions - you will find the answers to these questions in the article.
Washing machine: how does it work?
First, it’s worth considering what parts a Samsung washing machine consists of. This determines whether the user can properly disassemble the Samsung machine. Typically they can be described as follows, regardless of the manufacturer:
- There are several panels inside. Front and rear, base versions are available.
- A tray of the appropriate type into which the products are poured and filled.
- The program panel is an essential component of machines, especially modern ones.
- Each model is equipped with a drum, couplings and a tank.
- Tank weights.
- Engine.
- Spring mechanism.
- Water pump.
- heating element.
- Pressostat.
Hoses and wiring
The first hose to be removed is the hose from the inlet valve. You will need pliers. Take them and bend the clamp that secures the hose. Then remove the hose itself along with the clamp.
Do the same with the hose going to the pressure switch: loosen the clamp, disconnect the hose, clamp and cuff. Also disconnect the hoses going to the tank.
With wires everything is also easy. Disconnect them by pulling them out of their respective slots.
READ MORE: NORDFROST refrigerators: customer and specialist reviews, owner reviews about all models
Carrying out preparation work
Preparation for further disassembly of Samsung washing machines largely depends on the scheme in which the laundry is loaded - vertically, in the frontal version. Sometimes, to access the internal parts, it is enough to remove a special panel located at the back. This makes disassembly easier.
It is recommended to study in advance the electrical diagram and description of the main components for a specific model of a Samsung washing machine. Only after this can the owner begin the independent repair and disassembly process.
Before disassembling the Samsung washing machine begins, the following steps must be performed:
- First, the instructions are studied along with all the rules described in it. They tell you how to disassemble the case.
- Then you need to start preparing the appropriate equipment.
- At the next stages, the machine is completely disconnected from the supply of electricity and water. The drain hose and the outlet to the sewer must also be disconnected. Disassembly is easy here.
As for the equipment for disassembling a Samsung washing machine, it will consist of the following items:
- Long bent pliers.
- Insulated pliers.
- An ordinary type of wire cutter.
- Pliers and wire cutters used to process self-clamping clamps.
- Phillips head screwdriver.
- Flathead screwdriver.
- Wrenches for 19, 9 and 8.
- Service key. Without it, disassembly is impossible.
When disassembling a Samsung washing machine, you need to take into account that most of the parts are made of plastic. Therefore, you need to work carefully and carefully. Otherwise, the elements may be damaged and will have to be replaced, which will involve additional costs.
