For what reason may an electronic cigarette not charge?

When does your e-cigarette need recharging?

If the battery charge in the device drops to 30%, the LED sensor starts blinking.

The method of signaling depends on the type of vape:

there are models in which data on the battery charge level appears on the display;
There are devices that transmit information only using a flashing indicator.

Certain signs allow you to understand that the battery has run down to a critical level:

the volume of steam produced is greatly reduced (or its production stops completely);
puffing becomes difficult (the effort when inhaling vapor increases significantly);
the gadget begins to leak (the evaporation of the smoking solution from the wick slows down because the coil receives a small amount of energy).

How to charge an electronic cigarette without charging at home?

The process of using a vape is only possible with a full battery. With a dead battery, the mod will not be able to generate steam. In order for the steam generator to serve for a long time, it is necessary to correctly carry out the process of charging its galvanic element.

Under normal conditions, the battery can be easily charged using the power supply. But how to charge an electronic cigarette without charging? Let's try to find the answer to this question.

It is worth noting that before you begin the charging process, you need to make sure that the battery is dead.

The following signs will indicate this:

complete absence of light from the indicator light or its blinking;
the amount of steam produced by the steam generator has decreased or stopped altogether;

Let's look at a few of them:

Battery capacity. Batteries with different capacities must be selected based on the number of cigarettes smoked;
Depending on the capacity, the time to fill the battery will vary. Small-volume galvanic cells will charge in about two hours, and large ones in about five.

The easiest way is to use rechargeable batteries that can be easily charged.

We found out how to charge an electronic cigarette correctly using a power supply. How to supply it with energy without charging?

Let's highlight the main methods of charging the battery:

Using the charger that came with the kit.
Using a USB adapter.
Using an adapter from your phone.
Using a homemade design.

Let's find out how you can charge a galvanic cell without the charger included in the kit.

The USB cable connects to the mod and the computer at the same time. In this case, the atomizer is disconnected from the entire structure. If the mod model has a hole for a mini USB, then use is possible when powered from the network.

You can charge the battery for an electronic cigarette using a mobile phone charger.

But you need to remember one rule - the battery of the phone whose adapter you are going to use must be designed for 3.7 V.

Homemade charger

Another way to power the battery can be a power supply made independently at home.

To do this you will need:

3 AA batteries connected in series;
resistor with a resistance from 5 to 10 Ohms;
electrical tape to protect contacts;
stationery knife, screwdriver.

If you still had to charge your electronic cigarette manually, you need to know that it can significantly reduce the battery life.

Owners should remember that the battery is designed for up to 800 full charge cycles. Depending on the manufacturer and model, this number may vary.

The process of powering the battery with any device should proceed as follows:

Unscrew the threads of the atomizer and the component part.
Connect the battery to the selected charger.
Connect the adapter to the network and, looking at the charge indicator light, make sure that charging has started. It will begin to change color.
The completion of the charging process will be indicated by a change in the color of the indicator or the frequency of its flashing.

Here are the basic rules to follow:

Try not to leave the battery charging overnight.
Protect this item from moisture.
Charge until the battery is fully charged, because frequent charging will damage the battery itself.
If the electronic steam generator is not in use, try to disconnect the battery from it and store it separately.
Choose models with replaceable batteries. This is very convenient, because in this case you always have one charged battery with you.

And remember - a correctly performed charging process will extend the life of the battery. Follow all the requirements and the device will work for a long time without breakdowns.

Why does the electronic cigarette not charge?

If there is a problem with charging your gadget, you should not get rid of it immediately. There are several simple ways to quickly fix the problem.

The device stops charging for the following reasons:

no contact;
a short circuit has occurred;
the service life has expired;
damage has occurred in the board;
contacts are clogged;
The charger or adapter does not work;
The device was blocked.

Contact lost

The vape fails if the contact connecting the battery and the atomizer falls in. To detect a malfunction, unscrew the battery and inspect the connections of the wires.

Contacts are clogged

In order for the electronic cigarette to work properly, you should periodically examine and clean the contacts. Prevention is carried out once a week.

Short circuit

The gadget stops working after a short circuit. The malfunction occurs when the smoking solution leaks into the battery niche.

The board is damaged

Often the board burns out due to moisture entering the battery socket. The cause of the problem can also be a manufacturing defect.

Expiration date

The battery in an electronic cigarette is designed for a certain number of recharges. A battery that has reached its limit will fail. The battery becomes unusable after 500-800 charges.

Features of chargers for electronic cigarettes

Converting vapor requires a large amount of energy, so a charger for an electronic cigarette should be at hand for every user. There are various chargers, as well as smoking devices themselves.

If we classify steam generators by shape, then there are three types:

Classic - “STICK”, cone shape.
Boxmod is a convenient box shape.
Exclusive - individual design.

For smokers, functionality is important. There are four types of ES:

Set for beginners - without additional functions.
Battery mods are identical to the box mod model - they are equipped with removable batteries. These devices must come with a cord with a micro-USB connector.
A mod with a thermal control function - in this case, adjusting the steam temperature requires frequent charging of the battery.
Mechanical mod - without protective functions. Improper use or defective equipment causes explosion and fire of the device.

How to charge correctly

For the long-term and stable service of each e-cigarette battery, the first charge is important, in which two rules must be taken into account:

We charge until a full cycle.
We wait a few more hours while the battery charges.

During subsequent charging cycles, avoid common mistakes:

do not charge the gadget throughout the night - this will cause the battery to deteriorate much earlier;
turn off charging immediately after the corresponding signal appears;
During long breaks in use, disconnect the unit from the atomizer.

Types of chargers

Chargers for electronic cigarettes are classified according to a number of criteria: battery power, functionality and high cost of the gadget itself. Sometimes a vape charger influences the choice when purchasing an ES.

USB

The battery packs have a micro-USB port that allows you to connect the device to a tablet or computer for charging. For charging from the mains or in the car, an adapter and cord of the appropriate type are provided.

Universal

If abundant vaporization occurs, recharging is required more often. A universal device that is compatible with 18350, 16650, 18650 batteries is suitable here. In some cases, it can charge players and mobile phones.

Portable charging cases

The cigarette case charger has a built-in battery and looks like a smartphone. The case ensures safety during movement and is designed for vapor generators similar to ordinary cigarettes.

Powerbank

This type of charging saves you if there is no outlet or other power source nearby. It is suitable for more expensive devices.

To understand how batteries are charged, you need to read the instructions that come with all brands of electronic cigarettes.

Is it worth saving on a charger?

If you want to extend battery life, the answer to this question is no.

When it is not possible to purchase an original device, you can use the homemade charging option. But frequent use will shorten the life of the battery of the electronic device.

Homemade charger

Such charging is made from improvised means and requires several elements: batteries (3 pcs.) and a resistor (with a resistance of up to 5 ohms). It is necessary to connect all the elements, connect it to the device and put it on charge.

With different types and methods of recharging, it is important to remember that any electronic cigarette has its own recommendations. And using a charger from a tablet or phone can damage your device.

What to do if your e-cigarette battery does not charge

When the electronic cigarette stops charging, perform the following steps:

Check the functionality of the charger. Connect the device to a working USB cable.
Remove the blocking. The electronic cigarette will start working after pressing the special button 5 times.
Charge a dead battery. The device will turn on no earlier than 15 minutes after connecting to the power supply.
Check contacts. The gadget is unscrewed; if the contacts have come loose, they are corrected with a needle. Carefully assemble the device.
Clean contacts. Wipe the metal plates with a cotton swab moistened with alcohol. Remove the accumulation of dirt with a needle in hard-to-reach areas.
Check the expiration date of the battery. The battery, which has served its allotted time, is replaced with a new element.

How to charge an electronic cigarette?

In this article we will look at all the questions regarding how to properly charge an electronic cigarette. Without charging, your vape device will work offline for a maximum of a day with regular use. But the batteries in an e-cigarette are somewhat different from the power sources of other devices. What is the difference? Let's figure it out.

About charging methods

The battery is the most important part of the vape device, because it is thanks to it that your electronic cigarette works and creates steam! Proper use of the battery will extend its life and provide maximum comfort during daily use. To understand how to charge your device, you first need to understand what types of charging exist for modern electronic cigarettes.

There are only three main types:

Charging via central 510 connector.
Charge via micro-USB connector.
Charging batteries in a separate charger.

To identify the pros and cons of each type of charging, let's look at each of them in more detail.

Charging connector in the central connector 510

This type of charging method is rapidly becoming obsolete, it was extremely common and was used quite successfully. Electronic cigarettes of the eGo format are charged via the 510 connector. Examples of such devices are: Kanger Evod 650 mAh, Joyetech eCom-C Twist.

The only advantage of such a charging system is the absence of additional holes and joints on the power supply housing and its compact size.

The first disadvantage is the need to disassemble the device every time it is charged.
Another disadvantage is the mandatory presence of a special charger.
And the last drawback is the inability to use the device while charging.

Micro-USB connector

Most modern electronic cigarette power sources are charged via the micro-USB connector. The convenience and versatility of this scheme are so great that it is used both on pen-style cigarettes and box mods. A USB charging connector is installed in such devices as: Eleaf iJust 3, Ehpro Evok 80, Kanger Kbox 200W.

Versatility and accessibility. Almost everyone has a cable with a micro-USB connector.
There is no need to disassemble the device to charge it.
On a number of devices with a micro-USB connector, there is a hovering function while charging.

The objective disadvantage of charging via USB is that not all devices powered by more than one 18650 battery cannot be adequately recharged in this way.

Charging batteries in a separate device

Most electronic boards installed in e-cigarette mods with a power of 150 watts or more are not able to cope with charging the batteries inside the device, since charging two or three 18650 batteries can overheat and burn the board. Therefore, even if such an electronic mod has a micro-USB connector, its batteries must be charged in an external charger. Some manufacturers specifically include a clause in the instructions that says “The micro-USB connector is intended exclusively for software updates.”

External devices for recharging batteries usually operate “from a wall outlet”, since they require more voltage to charge several 18650 batteries at once. In such charging stations, special electronics are installed that fully control the process and make it as high quality as possible.

Some of the most well-known manufacturers producing reliable and high-quality chargers are NItecore and Efest. The chargers they produce meet all the necessary standards and do their job perfectly. Today the most popular among them is:

The Efest LUC V4 charger is a universal station for powering batteries of different sizes. You can install different types of batteries at the same time. The gadget is equipped with all kinds of protections that prevent unpleasant situations when charging the battery. The charger is compact in size, so it will not take up much space in your bag or on your desktop.

An external charger, equipped with the necessary electronics, recharges as correctly as possible, increasing the service life of the batteries.
Externally charged batteries have the same voltage, which ensures better performance.
If you have more than one set of batteries for your device, you can charge the batteries “in reserve.”

This charging method requires an outlet, which is not always convenient.
The devices are relatively large in size and are really inconvenient to carry around.

How to charge my e-cigarette?

We have already found out that the charging method depends on the specific model of the Vape device. Modern battery mods and electronic cigarettes with built-in batteries can only be charged via a micro-USB connector. Examples of such devices are Ijust 3, Eleaf Ipower 80W, Tesla Nano 100W TC Steampunk.

Charging the batteries of electronic mods without a micro-USB connector (or if the connector is not intended for charging) is carried out only in an external charger. Devices of this type: Smoktech Koopor Mini 60W TC, Tesla Invader 3, SMOK GX2/4 KIT. When purchasing such devices for the first time, do not forget to purchase a charger for them from the manufacturers Efest or Nitecore.

The most important question concerns battery mods for two or more batteries that have a USB connector for charging. As mentioned above, it is possible to charge batteries inside such devices, but it is not safe, both for the devices themselves and for you.

Important! Before charging the device, study all the information about your device, which is in the instructions and on the manufacturer’s official website.

Typically, if a vape has a charging port and a power rating of 100 watts or higher, the manufacturer itself recommends charging the batteries separately, despite the built-in charging system. The clearest example of such a mod is Wismec RX200. There are exceptions to this rule, for example, iStick TC 100W from Eleaf, which, due to the parallel connection of batteries, can be charged via USB without any problems.

Important! Do not attempt to charge a disposable e-cigarette. As practice has shown, this can cause damage to your health and property! Disposable e-cigarettes must be disposed of after use!

Mod for one battery: USB or external charging?

Devices powered by a single 18650 battery with a quick-swap battery can confuse a vaping newbie, leaving them with the question, “How exactly should the mod be charged?” In fact, there is no difficulty here. The control electronics of small vape devices with one battery are quite capable of recharging it from almost any USB and there is no need to buy an external charger.

However, if you want to vape non-stop, then to extend the life of the battery, it would certainly be better to purchase another battery and charge it externally. This is due to the fact that using the device while charging (the so-called passthrough function), although extremely convenient, somewhat reduces the life of your battery.

What if I don't have a charger?

It also happens that your device suddenly runs out of charge, but you don’t have a charger with you. In this case, there are several options:

– Carry a microUSB cable with you if your vape device has a corresponding connector. The modern world is filled with various gadgets with a USB socket, and if you have a cable with you, you can connect to any device that has a voltage release function. Remember that the charging current should not exceed 1 Ampere! – If you use a mechanical mod, then in such a situation there is only one way out - to carry an additional battery with you, preferably several at once, since mechanical mods consume a large amount of energy.

We strongly DO NOT recommend that you use “makeshift” methods of charging the battery (different terminals, wires connected to other power sources). Without special knowledge, you risk damaging your battery or, worse, causing great harm to your health. It is always better to use safe ways to replenish battery energy - special chargers.

Summary:

Charging via the 510 connector is an outdated scheme that will inevitably leave the vaping world in the very near future. The most universal way is to charge the batteries inside the mod via a USB connector. This system is used on almost all “pen-style” electronics and box mods with one 18650 battery. External charging provides longer service life, faster charging speed, and safety. It is better to charge batteries of all mods with a power of 150-200 Watts in special chargers.

Always refer to the manufacturer's official instructions before charging your e-cigarette. This is the key to your safety and long service life of the vape device.

Why does the device discharge quickly?

Instantaneous discharge of an electronic cigarette is not uncommon.
If this problem occurs, you first need to make sure that the battery is not blocked. If after pressing the button 5 times, the gadget does not start working, then it needs to be connected to the power supply. Rapid discharge of an electronic cigarette is caused by:

Frequent use of the gadget.
Battery power. The discharge rate is affected by the battery capacity. When purchasing a vape, you need to check its capabilities. For those who smoke a little and for a short time during a session, electronic cigarettes with a capacity of 180 mAh are suitable. For intensive use, purchase devices with a 360 mAh battery. Low-power gadgets are thin and elegant. Women prefer to use them.
Violation of operation. Incorrect use of electronic cigarettes immediately after purchase leads to rapid battery discharge. Device malfunctions occur if the user recharges the gadget without waiting for the battery to be completely discharged. The device should be connected to the power supply when the battery is completely drained. This procedure must be performed 3 times. In this case, the gadget is removed from charging after a signal sounds indicating the completion of the process.
Environmental conditions. The batteries of electronic cigarettes are instantly discharged at low temperatures. The devices are not recommended for frequent use in the cold. When used in such conditions, battery life will be significantly reduced.
Smoking process. When drawing in vapor, simultaneously press the button and puff. This is a prerequisite to extend the use of an electronic cigarette. Advanced owners are advised to release the button 2-3 seconds before completing the tightening. At this point, a sufficient volume of vapor has been generated for inhalation. The smoking process is comfortable, and the battery power is consumed economically.

The operation of the electronic cigarette will not be disrupted, the parts of the gadget will not be damaged if you use the original device (included with the vape) for recharging. The device lasts a long time if the owner charges it correctly, keeps the battery clean, and does not allow smoking liquid to leak into the battery socket.

If the gadget discharges quickly

The quick discharge of the gadget is puzzling, especially for novice vapers. The reasons for this trouble may be different.

Remember that the battery is not eternal - it tends to exhaust its life. On average, the battery is designed for 500 charge-discharge cycles. Therefore, after using your vape for a long time, you may notice that the battery drains quickly. The problem is solved by replacing the battery.
You should also match the battery capacity to your vaping needs. This relationship can be clearly seen in the following figure.
Soaring in the cold drains the gadget very quickly. 50-60 puffs with a battery capacity of 1100 mAh are enough for it to completely lose all energy.
Sometimes the blinking indicator is mistaken for a signal indicating a dead battery. This often happens if the steamer takes long or sharp puffs. And since all batteries have protection against overheating, the so-called “cut-off”, after 6 seconds (on average it takes 5 seconds to tighten), it is triggered and the LED blinks. To determine whether it is indeed a “cut-off”, disconnect the atomizer from the battery and press the button again. If the blinking repeats, the battery is low.
Also, the reason for the rapid discharge of the battery may be the high resistance of the coil in the clearomizer. Try installing a different miser with less resistance.
If the mod is set to high power to produce a huge amount of steam, the battery will drain very quickly. It is necessary to avoid high powers, because, in addition to the rapid loss of battery energy, you will get a burning taste.

Other reasons for rapid battery discharge may be hidden in the electronic board. In this case, the gadget will have to be taken to a service center for inspection.