How to change the drive belt on a washing machine?

How to replace the belt on a Samsung washing machine

Washing machines manufactured by Samsung have a cover located at the back that is not removable. This always makes it very difficult to eliminate unit breakdowns.

To fix the problem, you will need:

• The same belt - should be selected with markings identical to the failed one;
• A piece of electrical tape no more than 15 centimeters long;
• Half a meter of wire 0.5-0.8 millimeters thick;
• Wire cutters;
• A flashlight or any other device that can become a light source;
• Crosshead screwdriver.

Before starting repairs, inspect the gear and drum pulley. The gear has several compartments for the belt mates. It is installed from top to bottom. When installing a new belt in place of the old one, it is important to correctly get to where the failed element was previously. If it gets too close to the gear, it will not be clear how correctly it is installed. There is a possibility that in this case part of the belt will either sag or stand on the edge of the pulley and then the repair work will have to be repeated.

After the strap is put on the gear, it needs to be moved slightly to the side. It is important to choose a pulley position where it has support from turning the equipment, which, as a rule, constantly tries to move to the opposite side, on which it will stop thanks to the stop.

Use electrical tape to secure the strap. To protect it from damage, a wire is useful - place it on top of the electrical tape, forming about 10 turns and secure its edges by twisting them together. Rotate the pulley until the belt fits properly.

If the actions were performed correctly, you will hear a kind of click. You won't be able to turn the strap because it is securely fixed with the lock you made.

Now you should turn the gear in the opposite direction, and then remove the electrical tape and wire. The renovation is complete.

All actions, in general, take no more than a quarter of an hour, but only when they are performed strictly in accordance with the instructions. To check the result, rotate the pulley. The belt snaps into place and is aligned.

How to change the belt on an Indesit washing machine

First, get a new strap. It is better if it comes from the manufacturer of the washing machine or a trusted seller. First remove the remnants of the failed belt from the machine and only then proceed to install a new one. The replacement belt purchased should be placed on the engine, pressing its upper part more tightly to the pulley. Now you need to simultaneously rotate the drum and install the element on the pulley.

The belt must be in the center of the pulley located on top. This can be achieved by moving it a couple of tracks on the pulley, which is located at the bottom of the equipment.

Step-by-step instructions for replacing the belt

If, due to wear or damage to the drive belt, it becomes necessary to replace it, the following step-by-step instructions will tell you how to cope with the task:

• unplug the equipment from the outlet;
• unfold the device to access the back panel;
• unscrew the fastening bolts and remove the panel;
• behind it there is a drive belt; in normal mode it is put on a pulley and an electric motor. If it shows any tears or signs of wear, remove it. Pull towards you and turn the pulley a little;

• First pull the new belt onto the motor shaft;
• then pull it onto the pulley, rotating it in parallel;
• check that the installation is correct so that the belt is inserted smoothly and without distortions;
• screw back the back panel.

The process of removing the old belt and installing a new one is shown in detail in the video instructions to make the process easier to understand.

How to put a belt on an LG washing machine

To replace the strap on LG equipment, unscrew the bolts located on the rear wall of the case and remove the cover secured by them. You can perform these manipulations using a Phillips screwdriver.

Remove the failed strap by pulling it to the side and turning the pulley in parallel. When rotating, the element may burst and fly apart. In this case, it is important to collect all its parts so that they do not damage the machine in the future.

Now we put a new belt on the engine, and after that on the pulley. To do this, pull the strap onto its circle and carefully turn it. Check that the belt is placed exactly where it should be and is firmly pressed into the groove. Rotate the pulley to ensure proper installation. After checking, put back the fixing panel and screw in the bolts.

As you can see, changing a faulty belt in a washing machine is not difficult. The main thing is to carry out all actions slowly and strictly adhere to the drawn up action plan.

Bosch washing machine repair cost

Prices often depend on the make and model of equipment, the year of its manufacture and the type of breakdown. Below you can see approximate prices. In order to obtain a more accurate cost, you must provide the following information:

1. The exact model of your unit and preferably the year of manufacture.
2. State the product number of the machine, which is indicated on the sticker (the sticker is located on the body of the machine under the hatch, open the hatch and you will see it).
3. Describe the machine breakdown in detail.
4. Name the area where you live.
5. Convenient time for the technician to arrive.

Price list with prices for repair of Bosch washing machines

*The cost of work does not include spare parts and consumables. And also prices will be 1000 rubles more expensive. if the washing machine is built-in or located in a hard-to-reach place. Diagnostics in case of refusal of repair will cost 800 rubles.

Similar articles:

1. Buy a refrigerator inexpensively with delivery, prices, Moscow, regions
2. How to choose a freezer for your home: expert advice
3. 15 reasons why the washing machine does not spin clothes | RemBytTech
4. The washing machine does not spin. How to fix it yourself.

READ MORE: Ondulin or corrugated sheeting: which is better for a roof, which is cheaper, a roof made of corrugated sheets, pros and cons, how to compare

What kind of belts can there be in a washing machine?

V-belt

Most often, such belts are used for asynchronous motors. They are made from high quality material and special strength.

This element, installed in the machine, must be tensioned so that its deflection does not exceed 5 millimeters when pressed with a finger. The tension is produced by moving the motor, with the fasteners pre-unscrewed. If the engine movement is not sufficient to create the required tension, then such an element must be replaced. Its installation is carried out starting with the motor pulley. Next, the strap is inserted into the groove of the drum pulley. Then, holding it in it, they turn the pulley until it is completely in the desired place. Once the strap is in the right place, its installation can be considered complete.

V-ribbed belt

Used for placement in commutator motors. It has a jagged shape. It can have a variety of characteristics regarding its size and shape, as well as have a different number of wedges.

Replacing a post-wedge strap is completely identical to changing a wedge strap. There is only one difference in installation - the poly-V-element should be located in the center of the counter pulley, both on the drum of the washing machine and on the engine.

The tension level of this belt is slightly lower than that of the previous model. It is produced by turning it completely. If the belt tension during repair is too strong, you should be extremely careful not to injure your hands.

Preparation

If you determine that the belt is worn or damaged, you need to take preparatory measures to replace the part. The first step is to prepare the tools and disassemble the device body in order to remove and remove the part. To do this, disconnect the equipment from electricity, water supply and sewerage.

After this, you need to start purchasing a drive belt suitable for your model. The optimal solution would be to remove the old element, you can go to the store with it and choose the same one that is absolutely compatible with your equipment.

It is better to entrust the repair of washing machines to professionals!!!

We present to you our unique catalog of private craftsmen and service centers —

Select your city and artist in the filter: by rating, reviews, price!

When choosing a belt, pay attention to its type: V-belt or poly-V-ribbed. If there is an asynchronous motor, then a V-belt will do. A poly V-belt is suitable for a commutator motor. Also take into account the numbers indicated on the belt: the first 4 digits determine the length in mm, then the letter indicates the configuration of the wedges, and the last digit corresponds to the number of wedges.

All specified numbers and letters must be written down and checked when purchasing to ensure the code is identical. The process of replacing the drive belt can be seen in the video.

Causes of belt problems

Wear

Characteristic of compact models of washing machines, in which the parts are located extremely close to each other. While the unit is operating, they can rub against each other, thereby wearing out much faster than they should.

Cracked drum pulley

There can be many reasons for the formation of a crack, from overloading the machine to incorrect belt tension. One way or another, the occurrence of this breakdown requires replacement of the pulley.

Bearing wear

A high degree of wear can lead to strong vibrations of the spin unit and the unit drive. This causes the strap to stretch. Over time, it may slip or tear.

Incorrect use of the washing machine

When placing a large volume of laundry into the drum, the machine may vibrate strongly. The belt can easily fly off from such vibration. Or if the machine is not used for a long time, its strap may dry out and become thinner.

In side-loading units, one can often observe such a malfunction as fatigue deformation of parts made of plastic. This, in turn, leads to displacement of the machine elements and slipping of the belt. If this type of breakdown occurs, it is recommended not to waste money on useless repairs, but to purchase a new washing machine.

Household appliances Washing machine