Everyone is already accustomed to using an original remote control that is suitable only for one device. As you arrange your home and acquire more electronics, control tools begin to accumulate. External and structural differences between several analogues are not too significant. This suggests that it would be appropriate to replace the cluster of remote controls with one, but multifunctional one. We invite you to delve into the features of the device in more detail and consider options for how to set up a universal remote control for your TV.
What is a universal TV remote control?
Visually, the universal remote control (RC or remote control) is not much different from the factory analogue from the TV box. In addition to visual differences (the location of the keys and the shape of the case), what makes it unique is its internal structure. More precisely, the ability to change the type of infrared radiation. This makes it possible to customize it to work with a specific device.
Healthy! The original remote control from the box of the TV, air conditioner, etc. is not universal. Its design features do not allow it to be adapted to control and configure digital television on another device. It can only work in conjunction with a specially adapted device. For example, the TV Supra control tool will not work with LG. Moreover, it will also not be possible to control the 2014 model using the 2012 remote control. By the way, the manufacturer produces semi-universal and fully programmable remote controls to work with all models of its TVs and more.
What is a universal remote control
It sounds complicated, but in fact, it is a simple device that creates signal pulses suitable for most TVs and set-top boxes.
Huayu, Gal, DEXP, Supra are considered popular and high-quality manufacturers of UE.
To set them up, special codes are used, which differ depending on the brand of TV, and you can view them on this page.
The universal model will fit a large number of common and popular manufacturing companies, for example, Samsung, LG or Philips.
Differences from a regular remote control
The original remote control and the universal one have two significant differences, which significantly increase the cost of the first - this is its “branding” and quality.
A remote control made by the owner-manufacturer is undoubtedly of higher quality than a Chinese one. However, if the TV is already 5-6 years old, then you will not be able to find a branded remote control for such an old model.
How does a universal remote control work?
It is difficult to understand what a multifunctional remote control is without a clear example of the step-by-step operation of the device. Although the principle of their operation is similar to each other, for example we use a universal remote control for a Philips TV.
Principle of operation:
- Involvement of the microcircuit. This stage involves the need to physically press a key, which triggers the required combination of electrical impulses.
- Generating and sending a signal. Infrared radiation begins to be generated inside the control tool, taking into account the device settings. The TV will only respond to a command that has the wavelength specified by the manufacturer. The task of the LED in the remote control is to generate the same signal and send it to the device. Typically it is in the range of 0.75-1.4 microns.
- Command capture and processing. All TVs use a phototransistor to interact with the remote control. It can sense infrared signals and then convert them into a pulse, which is sent to the electronic control center on the board. Already in the final block, measures are taken in accordance with the meaning inherent in the impulse.
The listed steps only look complicated; in practice, all stages are overcome by a signal in a fraction of a second.
Important! There are original and non-original universal remote controls. The peculiarity of the first ones is that they were produced by the same manufacturer as the TV. Such devices are usually easier to adapt to control, since they require fewer settings. However, they do not fit TVs from other manufacturers or only work with certain models. For example, the same universal IRC remote control from a third-party developer (non-original) can work with most device models.
Codes for universal remote controls
All TV models have a unique set of symbols from 3 to 5 elements. These codes are necessary to establish a connection between the remote control and the TV. The best way to find out the correct code is to study the technical documentation for the TV, which is always included. There is a faster way, the essence of which is to study the table of codes for universal TV remote controls. True, the list includes only the most popular device models.
Healthy! Unique identifiers are not just a hassle that complicates the setup of the universal remote control from GAL, Supra, Huayu and other manufacturers. They have 2 key purposes: increasing security and distributing signals between different devices. Without codes, all TVs in the house would respond to the remote control.
Instructions for connecting a universal remote control:
We begin the procedure for synchronizing the remote control and TV with the most banal, but still necessary procedures:
- Installing batteries. Often remote controls are sold without power supplies, although they may come included. If you want to never buy batteries again, we recommend choosing a battery right away. It will only require periodic recharging, but the device is also more expensive.
- Start the TV designed to pair with the programmable remote control. It should also be put into setup mode using the TV button. Often it is displayed separately on the device. Press and hold the button for about 3 seconds until the light identifier appears on the front side.
The following steps may vary depending on the TV model and pairing method. Since we can set up universal remote control codes for a TV in different ways, we offer a choice of automatic and manual options. There is also an alternative method that does not require the use of code.
Manually
If we were able to successfully find the code for our own TV, we can relatively easily pair it with the remote control.
How to connect a universal remote control to your TV:
- We go to the programming mode: for Supra – with the power button, for HUAYU – with the combination of the power key and “Set”, for Beeline – with the combination of “C” and “Setup”. In the first two models of devices, their controls must be held. In the Beeline remote control we can release the buttons after a couple of seconds. A successful transition to the setup menu is indicated by an LED indicator.
- Enter the TV code. After a couple of blinks of the diode, we can exit the setup menu.
Automatically
It is possible to switch the remote control to automatic code selection and synchronization mode. To do this, find the number “9” on the panel and, without lifting your hand, press it 4 times. As a result of entering the identifier, the TV receiver should turn off. As soon as it reboots, the re-collection of channels will begin - this is a slow procedure that can take up to 15 minutes. We have successfully put the TV into sync mode, but our work is not over at this stage.
Setting up a universal remote control for Samsung, LG, Philips and similar TVs:
- Turn on the TV if it is currently inactive.
- Point the remote control at the receiver and click on: for Supra - the power button (holding it for 5-6 seconds), for HUAYU - “Set” and “Power” (release at the same time) and click on “Power” again, for others - the TV key (press until the LED lights up).
- Press and hold the mute button. If the TV responds, everything went well. In the case of HUAYU, we additionally exit the programming mode by double-clicking on “Set” and only then check the functionality of the remote control.
No code required
Most programmable remote controls have a universal code selection tool. If the ID is unknown, this is the best way to work.
Instructions:
- Point the remote control towards the active TV and press the “TV” and “OK” keys together. Most remote control models require you to hold the buttons for a couple of seconds. Illuminated numbers can indicate the success of the event.
- Slowly press the “CH+” key; we usually use it to switch channels. You should continue until the TV turns off, which indicates a successful selection of the code.
- Click on the “TV” panel element to save the settings.
By the way! We can try downloading a universal TV remote control to a smartphone. The application allows you to select a TV model, and selects the code using its own database. However, for everything to work, the phone must have an infrared port.
Want to use your smartphone as a TV remote? All you need to do is install one of the TV remote applications for Smart TV.
Instructions for setting up universal remote controls
The instructions say that the universal TV remote control will start working only after the power source is connected. Therefore, first insert the batteries into the appropriate slot. Some devices do not come with batteries and must be purchased separately.
AAA batteries are cheaper, but it is better to buy rechargeable ones. In the future, they can be charged rather than sent for recycling. As a result, you can save money. Along with the batteries, buy a special slot through which you can charge them, after connecting it to a regular outlet.
Setting up a universal remote control for your TV begins with synchronization. Open your TV settings to select the appropriate mode. Main options: DVD, audio, TV, etc. To complete the connection process, press and hold the TV button for three seconds. Enter your equipment code in the appropriate box. To find out, you need to study the accompanying documentation in detail. We will consider this point in more detail below.
Automatic
To set up in auto mode, you will need to press the combination of four nines on the remote control panel for a couple of seconds, without removing your finger from the 9 key. When everything is done correctly, the TV will immediately deactivate. Then the automatic selection of TV channels will start. The whole process may take about 15 minutes. This method is used if the TV owner does not have a code for a universal remote control.
How to set up and connect a universal remote control to the TV? Let's go through the settings. For Supra: you need to turn on the TV, then point the remote control and hold the Power button for about six seconds. The diode should just light up. When the TV began to respond to an increase or decrease in sound, then the setting in auto mode was completed.
On the Huayu remote control, press Set and then immediately Power. This process must be done while adhering to the rule - the keys are not activated immediately, but with a slight time interval. Then the buttons are released and Power is pressed. You need to make sure that there is a volume scale on the TV screen. To exit the program, you need to click on Set a couple of times.
Remember that each TV has its own specific pairing code, which is needed for maximum precision setting of the remote control.
The third setting method, which is often used for universal remote controls. So, turn on the TV, then press and hold the TV button until the LED starts to light. Please note that some models may flicker. Then hold down Mute to activate the search. Once the process is complete, you need to press any button on the remote control to check if there is a response to the commands.
Manual
Now we will look at the second method, how to set up a universal remote control for your TV. You need to use a special code for your TV, entering it, you will need to follow the established procedure. So, for Supra, you need to point the remote control at the TV and immediately hold down Power, a window will pop up on the screen in which you will have to enter the code for your device. If the code is correct, the LED will blink a couple of times, you can release Power.
To activate the Huayu TV universal remote control, press Set and Power at once. After this, you need to wait until the LED starts flashing. A four-digit code is entered. When the diode goes out, you need to immediately click on Set. For Beeline, you need to activate the “TV” button and at the same moment hold down Setup and C. Upon completion of the installation, the device will blink a couple of times. This is a signal that you can release the keys. To check the device's functionality, increase the volume. In general, the process is quite simple, the main thing is to follow the sequence of actions. Remember that if the code has not been entered within 1 minute, the entire process will have to be repeated.
No code
Few people know how to set up a TV remote control without a code, but it’s really possible to do it. Follow the simple step-by-step instructions:
- Take the remote control and turn on the TV.
- Simultaneously press 2 keys on the remote control: “OK” and “TV”. They need to be held for several seconds. Hold them down until only the number keys light up.
- Switch TV channels until the TV turns off. Disabling is a sign that the code was selected automatically.
- To save the specified parameters, press the “TV” key.
How quickly will the required code be selected? It all depends on the model of TV you are using. When you press the “CH+” button, wait a few seconds until the TV responds to the command.
Universal remote control codes
Regardless of what brand of equipment you use, codes are needed to set up a universal remote control. Without them, it is impossible to configure the equipment. Of course, you can use an alternative solution through automatic selection, which was already discussed earlier, but it is better to find the codes.
To avoid solving such problems after the fact, check such details before purchasing equipment. Using the universal remote control is extremely simple; just point it at the TV and then press the corresponding button.
How to find out the TV code
The TV code for the universal remote control is often indicated in the accompanying documentation. Be sure to check the device data sheet. If it is not possible to read the documents, find the technical specifications of the TV on the Internet. Today this can be done without any problems. There is a third way - the official website of the manufacturer. Companies that produce TVs publish tables with the correct parameters on their portals.
How to set up a universal remote control for your TV?
The process of setting up the remote control involves establishing a strong connection with one or more devices.
How to program a universal remote control for a TV (the easiest and most common way):
- Turn on the remote control and TV.
- Find and press the “Ok” or “Set” key, depending on the control tool.
- We indicate the code and release the buttons pressed in the previous step.
- We check the functionality of the devices.
If the action does not help, we recommend checking the correctness of the specified code and whether the programmable device supports working with a specific TV. When everything is correct, but there is no result, we recommend that you refer to the instructions for the remote control. It describes in detail all the necessary measures for synchronization, which may differ from the standard ones.
Setting up a universal remote control for Supra TV
To configure the remote control for TV Supra, you must perform the following steps:
- activate TV;
- point the device in the desired direction;
- On the device, simultaneously press “Power” and hold it for a minute;
- wait until the LED lights up and the volume control icon appears on the screen.
If the TV works, then the parameters are set correctly.
Automatic
You can connect the universal remote control to the Supra TV in the following way:
- turn on TV;
- point the remote control towards the device;
- click on the “Power” key and hold it for 5-6 seconds;
After a minute, the LED will flash and an option to adjust the volume will appear on the screen. This means that the UPDU has been successfully paired. Save the settings and check the TV's operation.
Manual
To manually synchronize your device, follow the step-by-step instructions:
If you have any questions or complaints, please let us know
Ask a Question
- find the correct code on the Internet or in the model data sheet;
- turn on the equipment;
- point the remote control towards the display and hold the “Power” button;
- Without stopping pressing the button, enter one of the TV model codes;
- release the key when the indicator starts flashing.
Instructions on how to unlink a bank card from OKKO on your TV and phone
If the value does not match, select the correct code. For each model there is a list of different combinations. Enter one at a time until you find one that suits you. At the end, save the finished result. Proceed to control the Supra.
No code
To set up a remote control for TV without a code:
- start TV;
- simultaneously hold down the “TV” + “OK” keys;
- hold your finger on the button for 2-3 seconds until the remote control buttons start flashing;
- wait a minute until the number keys light up;
- press the “CH+” TV channel switch button one by one;
After a couple of minutes the TV will turn off.
To save the settings, click the “TV” key. If none of the methods help, contact the company's service center. The device may have malfunctioned or broken. You won't be able to fix it yourself. Call the hotline and ask the question you need. The site also has a form for users to contact us. Enter your request in a separate window. Operators will provide recommendations to resolve the issue.
