How to understand that the vape is charged and charge it correctly

Features of chargers for electronic cigarettes

Converting vapor requires a large amount of energy, so a charger for an electronic cigarette should be at hand for every user. There are various chargers, as well as smoking devices themselves.

If we classify steam generators by shape, then there are three types:

Classic - “STICK”, cone shape.
Boxmod is a convenient box shape.
Exclusive - individual design.

For smokers, functionality is important. There are four types of ES:

Set for beginners - without additional functions.
Battery mods are identical to the box mod model - they are equipped with removable batteries. These devices must come with a cord with a micro-USB connector.
A mod with a thermal control function - in this case, adjusting the steam temperature requires frequent charging of the battery.
Mechanical mod - without protective functions. Improper use or defective equipment causes explosion and fire of the device.

How to charge correctly

For the long-term and stable service of each e-cigarette battery, the first charge is important, in which two rules must be taken into account:

We charge until a full cycle.
We wait a few more hours while the battery charges.

During subsequent charging cycles, avoid common mistakes:

do not charge the gadget throughout the night - this will cause the battery to deteriorate much earlier;
turn off charging immediately after the corresponding signal appears;
During long breaks in use, disconnect the unit from the atomizer.

Types of chargers

Chargers for electronic cigarettes are classified according to a number of criteria: battery power, functionality and high cost of the gadget itself. Sometimes a vape charger influences the choice when purchasing an ES.

USB

The battery packs have a micro-USB port that allows you to connect the device to a tablet or computer for charging. For charging from the mains or in the car, an adapter and cord of the appropriate type are provided.

Universal

If abundant vaporization occurs, recharging is required more often. A universal device that is compatible with 18350, 16650, 18650 batteries is suitable here. In some cases, it can charge players and mobile phones.

Portable charging cases

The cigarette case charger has a built-in battery and looks like a smartphone. The case ensures safety during movement and is designed for vapor generators similar to ordinary cigarettes.

Powerbank

This type of charging saves you if there is no outlet or other power source nearby. It is suitable for more expensive devices.

https://youtube.com/watch?v=JTacGWNnqDw

To understand how batteries are charged, you need to read the instructions that come with all brands of electronic cigarettes.

Is it worth saving on a charger?

If you want to extend battery life, the answer to this question is no.

When it is not possible to purchase an original device, you can use the homemade charging option. But frequent use will shorten the life of the battery of the electronic device.

Homemade charger

Such charging is made from improvised means and requires several elements: batteries (3 pcs.) and a resistor (with a resistance of up to 5 ohms). It is necessary to connect all the elements, connect it to the device and put it on charge.

With different types and methods of recharging, it is important to remember that any electronic cigarette has its own recommendations. And using a tablet or phone charger can damage your device.

How to charge an electronic cigarette

To charge electronic cigarettes, depending on the model, three types of chargers are used:

USB cable with 510/910 connector

This cord charges most electronic cigarettes. The battery is wound into the cord with the same end that connects to the atomizer. Next, the other end of the cord is connected to the USB port of any office equipment or through an adapter to a 220V network.

USB cable with micro-USB connector

The most popular type of charging at present, since most electronic cigarettes are produced with a micro-USB port.

This is very convenient - you can use the same cord as for charging your Android mobile. The cord is connected to the battery with a micro-USB plug.

Next, the other end of the cord is connected to the USB port of a computer (or other office equipment) or through an adapter to a 220V network.

Separate charger (1/2/4 channel)

The most correct type of charging. Previously used on mechanical mods. The battery is removed from the battery and inserted into the corresponding slot in the charger.

Used in electronic cigarettes with removable batteries as an alternative to charging in the device itself using a USB cord with a micro-USB connector. Some mods do not have a micro USB port.

In this case, this is the only option to charge an electronic cigarette without a built-in charger.

Regardless of the type of charger, it is recommended to charge electronic cigarette batteries according to a proven scheme: charge a dead battery for 8 hours. Then after the battery is used and runs out again - again for 8 hours. It is recommended to repeat these so-called battery acceleration cycles 2-3 times.

In the future, you can charge according to the indicator readings:

In the case of a USB cable with a 510/910 connector, this will change color from red to green.
In the case of a USB cord with a micro-USB connector, this either changes the color of the button from red to blue, and in some models the indicator simply goes off, which means that charging is complete.

It's okay if you don't remove the battery from charging. There will be no overcharging - the electronics will worry about that.

Considering that the standard charger produces 420mA, you can estimate the charging time. For example, a battery with a capacity of 1100 mAh will charge in approximately 1100/420 = 2.6 hours. And if the capacity is 5000mAh, then 12 hours. Some charging cords have a charge current of 1000mA, then the batteries will charge faster.

However, such batteries will also run out faster. Therefore, we strongly do not recommend using 2000mA charging cords. Only the most modern mods have already been developed for this charging current. Ideally, use the original cord for charging the electronic cigarette, which comes with the kit.

Depending on the battery capacity, the power at which vaping occurs and the number of puffs, you can determine how long a fully charged e-cigarette will last you.

Often, indignant vapers complain that they are disappointed with the operating time of their device. This is not surprising, because the average statistical data may not be at all suitable for a user who does not let a cigarette out of his mouth.

It is believed that with a power of 10W, a capacity of 1100 mAh should be enough for 100 puffs, i.e. for all day.

If you take 1000 puffs, then of course 1100 mAh will not be enough for you per day.

In addition, if your battery is regulated, then at a power of 15W the charge will last for a shorter period.

In a word, take into account all the characteristics of your battery and you will be able to calculate the battery life.

How to charge and vape at the same time

To be able to charge a vape and vape at the same time, the device must be equipped with a Pass-through function; you can find out about this from the specification of the electronic cigarette. The function is implemented as follows:

the vape connects to a PC or adapter via micro-USB;
the device turns on;
current begins to flow directly to the evaporator, providing a stable voltage of 3.7 V and maximum evaporation power.

The advantage of this type of vaping is that the vapor will be as thick as possible, regardless of the battery charge level. This is only possible when using middle-class devices.

General rules and charging methods

There are three main charging methods:

via the central connector, via a charger with connector 510;
via microUSB connector;
using a separate charger to which removable batteries are connected.

The first method is used in eGo vapes. Its advantage is the absence of a separate connector on the device body, due to which it is better protected from moisture.

However, before each charge, you have to disconnect the liquid tank from the battery, which eliminates the possibility of simultaneously refilling and using a cigarette. Another disadvantage is the need for a special charger; if it breaks, you will have to buy a new vape.

The microUSB connector is available on all electronic cigarettes of a class higher than the entry-level eGo, but only devices with a power of up to 150 W can be charged through it - the board of a more serious vape may burn out during such charging. Most often, All-in-One type devices (for example, iJust 2 and iJust S) and battery mods for 1 battery are charged via microUSB.

The advantages of this method: versatility, no need to disassemble the case, the presence of a Pass-through function that allows you to charge and vape at the same time.

The only drawback of microUSB is the inability to charge powerful devices powered by 2 or more 18650 batteries. For such vapes, separate chargers are designed that charge several power sources at once and are connected directly to an outlet.

They are equipped with electronics that control the process and prevent the batteries from overcharging, ensure voltage stability and extend the battery life. However, they are relatively inconvenient due to being tied to an outlet (for comparison, you can charge via microUSB on the street using a power bank). This disadvantage is offset by the ability to charge several batteries “in reserve”.

To avoid damaging your battery, you need to follow simple rules:

Before charging for the first time, the vape must be completely discharged .
The charger should only be connected to a stable power source .
, use an adapter with an output current not exceeding 1 A.

It is almost impossible to break the battery of a modern electronic cigarette - lithium-ion batteries have no memory, so the second and subsequent charges can be started from any charge level; it is not necessary to complete the process. You can keep the device connected to the outlet all day - a fully charged vape will simply stop drawing current. The board of an electronic cigarette or a mechanical mod charger provides reliable foolproof protection, so there shouldn’t be any problems.

A few nuances

Usually an electronic cigarette with charging is already sold. If you are purchasing a used product, then in this case the charging device can be purchased at specialized retail outlets.

Buy only a charger that fully meets all the manufacturer’s requirements, otherwise you risk damaging the device.

If the vaping unit has already been used, then you can charge it without special preliminary discharge; you do not need to wait for a certain charging time; the duration will depend only on the device itself and the type of battery. You should not charge the device for longer than the allotted time, this will not lead to anything good.

The time for complete charging and discharging, as well as the process itself, may differ, because any technique is individual, although it may be similar to each other.

That is why, before using it for the first time, do not be lazy to get the instructions and study them carefully. This approach can insure you against many problems and breakdowns!

How to charge

Charging occurs using a USB cable or socket with an adapter. The battery charging current is designed for 1 Ampere, so you need to select a charger for 1 A and 5 V.

If you charge the device faster, the battery will become unusable faster. You can charge the cigarette with 2 amp charging as needed. This won't cause any problems. If you charge at 3 amperes or more, it will not give any result, since the battery capacity will not be able to accept more energy, which is calculated.

It is better to charge the device overnight with a charge of 0.5 A. The charge will arrive more slowly, but this will extend the battery life.

According to the product information, the iJust S needs to be charged for 4 hours at maximum power. If more time passes, there will be no problems. The cigarette will take as much energy as it needs and you can use the vape again.

How to know if it's charged

Let's figure out how to tell if the vape is charged. To determine the charge level, you need to look at the indicator. If the battery is less than 10 percent full, the indicator will beep frequently, when charging at 10-29% the blinking will become moderate, 30-59% will have rare indicator signals, and at 60- 100% indicator light is constantly on.

Security measures

Repair of the device must be carried out only in specialized centers. The warranty applies to the device with original parts.

Use iJust S at temperatures from -10 to +45 degrees.

It is strictly forbidden to use an electronic cigarette with spare parts from other manufacturers.

It combines all the positive characteristics of iJust 2, and its shortcomings have been corrected in the new vape. Therefore, we can assume that iJust S will win people's love.

Every owner of a vapor generator is interested in the following question: “How long does it take to charge a vape?” To date, there is no clear answer. It all depends on the battery size of your e-cigarette, as well as what charger you use.

You can only find out how long an electron is charging by using your own tests. The average time for a device is two to three hours to fully charge the device.

The indicator blinks, the device does not turn on

If you notice that the electronic cigarette is blinking, but the device itself does not function (i.e. you cannot smoke with it), then there may be several reasons for this

If the indicator lights up, but you cannot use the device, you need to pay attention to the following:

The e-cigarette battery is faulty. A sign of this is a sharp decrease in the amount of steam. This means that the battery has reached the end of its service life or has broken down due to improper use.
Short circuit. Its presence is indicated by the indicator blinking three times. It is necessary to disassemble the device and find the location of the short circuit.
Contacts have been sent. To troubleshoot the problem, you also need to disassemble the device and carefully inspect the areas where the wires are connected. If oxidation spots are found, they need to be cleaned. If there are no oxides, you should try to bend the wiring. A large needle is used for this.
The board is broken. If the board was immediately defective, it quickly breaks. In this situation, if the warranty period has not expired, it is better to exchange the vape for a new one.

How to charge an electronic device without a power supply

Via USB cable.

A common way to charge an electronic cigarette is to use a USB cable that powers the battery from a regular computer. To do this, before connecting, you need to disconnect the atomizer from the entire device and connect it via wire to a computer USB connector.

Homemade charger.

In cases where it is not possible to charge the device via a USB cable, a homemade device is used. To make it you will need 3 AA batteries, a resistor with a resistance of 5 to 10 Ohms, insulating tape to protect the contacts, a screwdriver and a utility knife.

The batteries must be connected in series and connected to the device using a 5 to 10 Ohm resistor. All contacts must be reliably insulated. This charging method can significantly reduce the life of your battery.

The battery can be charged from the power supply of a regular mobile phone. With this method, only one main rule must be observed - charging must be designed for 3.7 V.

We found out how to charge the ES correctly using a power supply. Rechargeable batteries are easier to charge. They can be charged using:

charger included (nothing complicated here: just plug it into the network and charge for the required time);
USB adapter (connect it to both the device and the computer at the same time. At the same time, disconnect the evaporator. If the model is equipped with a hole for mini USB, then charging is possible from the network. In this case, it will take more time to fully charge the battery, and the cost will increase );
adapter from the phone (phone adapter must be 3.7 V);
homemade device.

Is it possible to charge without a power supply?

Sometimes circumstances arise when the charging unit for a smoking device breaks down or was not included in the delivery kit at all.

Using a USB cable

The wire is connected to the computer, having previously completed a small modification:

The tip is cut off and the insulation is stripped. After this, red and black wires are identified - “plus” and “minus”.
A cork is prepared from a piece of paper, a red wire is stuck into its center so that it peeks out about three millimeters from below. The plug can be reinforced with electrical tape.
The clearomizer part is disconnected from the battery, the main contact is found, to which the “plus” is connected, and the “minus” is connected to the body part.
The plug is inserted into the battery block so that the red wire reaches the main contact. The black wire is attached to the body with a clamp or clothespin.
The cable connects to a USB port on the computer.

Common problems with various models

As a rule, devices shipped only from the factory have some charge in the battery, but hardly more than half of the capacity. Before charging your vape for the first time, you should completely discharge it.

You won’t be able to quickly charge an electronic device right away. The process of first recharging the battery should take 2-3 times longer than usual. And even if the indicator notifies you that the battery is charged, you should keep the device connected to the mains for at least 8 hours for the first time.

Next, we will give examples of common faults in popular ES models and methods for solving them.

These models have power buttons on the body.

If the cigarette still does not turn on, then try charging it by assembling the circuit in a slightly different way. First connect the charger to the battery, and then connect everything together to the network. In most cases this works.

eVik mod doesn't work

Most likely it is simply blocked. In this case, the actions are the same as with eGo electronic cigarettes - press the button on the device body 5 times.

Why does the electronic cigarette not charge?

If you connect your device to the charger and notice that it is not charging, wait about 15 minutes. and check again. There are cases when, after a battery is completely discharged, it takes some time for it to begin to gain energy, after which its accumulation proceeds as usual.

Make sure that the gadget's battery is not blocked from accidental pressing. To do this, press the power button 3 to 5 times in a row (depending on the vape model). If the command has been accepted, the button should blink and will remain lit the next time it is pressed.

Also, the reason that the battery does not charge may be a faulty power supply, the cable itself, or the charger plug.

Poor contact at the charging connection cannot be ruled out. The contacts may become clogged or unsoldered. If they become dirty, wipe them with a cotton pad soaked in alcohol. If the contacts are unsoldered, you will have to use a soldering iron to repair the damage.

How to charge your vape for the first time

If you follow simple rules from the first day of operation, then your electronic cigarette will serve faithfully for as long as possible. The battery is a key functional element of each mod, so recharging it requires special attention, especially if it is done for the first time.

The first charging session usually lasts at least 8 hours, and to 100% charge more powerful devices sometimes it takes a whole day

Important: the entire battery capacity must be filled with power - only in this case will it be guaranteed to work without failures. The following sessions usually last 1-2 hours - this is enough for active use of the device

Experts recommend following these recommendations during the first recharge:

The battery supply should be completely depleted - the LED lights stop lighting and the cigarette does not turn on.
Connect the gadget to the power source as shown in the instructions (it comes with the e-cigarette).
Do not rush to disconnect the device from the power supply after the message that it is fully charged - wait another 2-3 hours.
Do 3 similar “runs” of the battery (full discharge/charge) at the very beginning of operation.

What if the electronic device does not turn on?

If the electronic cigarette does not turn on, the reason for this is mechanical damage. Among the main ones are:

Deformation of the electrical network circuit. Vapes often fall, hit, and experience other external impacts. This leads to wires inside the device breaking and contacts fraying. The cable may fly off from the battery, from the connector, from the button.
Battery consumption. Batteries are designed to last a certain number of cycles. On average this is 1500-2000 digits. Over time, the battery lasts less. By turning it on and off, you can significantly increase the shelf life of the equipment.
Destruction of the button structure. Manufacturers offer a lot of experimental solutions. As practice shows, standard classic buttons without bells and whistles, which are easier to activate, last longer. Today, options with a petal internal structure are popular. But such power buttons do not last long due to the large number of parts.
Connector failure. If the power button activates the device, but there is no steam or traction, then no energy is supplied to the coil. Most often this happens due to damage to the connector, which becomes dirty, corroded and mechanically destroyed.

Causes and solutions

Any device has an instruction manual - first you should study it. You also need to determine what signals your e-cigarette battery provides. Usually, in case of low battery, the indicator in the form of a diode light bulb blinks constantly.

In order to charge, you need to remove the top part of the electronic device and screw the charging cord into its bottom part. If there is an indicator on the charger as well as on the battery, both should light up. This means everything is connected and charging is correct.

The indicators of most batteries tend to signal the end of the charging process - they either change color or go out. How long does it take to charge an electronic cigarette? The time for recharging can range from 1 to 3 hours - it all depends on the battery capacity. The larger it is, the longer it takes.

If the battery fails, its service life has expired - it should be disposed of immediately and under no circumstances be used in the future. On average, one battery can withstand up to 1000 full charges.

When you purchase a new electronic cigarette, remember that the first charge is extremely important and affects the further operation of the device - the power and duration of the battery charge. Below you can familiarize yourself with this nuance.

How are disposable models turned on and off?

Mini and supermini cigarettes function automatically. There are configurations with a rechargeable battery and replaceable cartridges, but due to the small battery capacity, such devices are unpopular.

The cigarettes are equipped with a tip with a diode. When you take a puff, the light bulb lights up and supposedly imitates the smoldering of a real cigarette. The brighter the diode, the higher the battery charge. On average, mini and supermini devices are designed for 150-200 puffs. If the indicator dims, you won't be able to vape for long.

The amount of charge can also be determined by the intensity of vaping. As the amount of energy decreases, the puffs become less intense.

Smoking fur and boxing fashion is more profitable and a priority. Many people believe that constant switching on and off leads to rapid wear and tear on the button mechanics. This is only relevant for budget models.

Branded devices are equipped with durable spare parts and buttons with an insulated structure. This means that the element will not be damaged due to moisture, liquid, dust and impacts on a hard surface.

Battery capacity

Models have different battery capacities. The smoker needs to decide on his needs. If a person smoked a pack of regular cigarettes a day, then a battery with a capacity of 220 mAh will not be enough for him even for a day. And 650 mAh or more when fully charged will be enough for several days of use. Depending on this, the charging duration will vary in time: for devices with a small-volume battery, the charging duration should be only 1-2 hours, the version with a large-volume battery takes 5 or more hours to charge.

To make it more clear, you can express the battery capacity in the number of puffs:

220 mAh = 220 pulls = 12 regular tobacco products;
350 mAh = 350 drafts = 20 regular tobacco products;
650 mAh = 650 pulls = 35 regular tobacco products;
900 mAh = 900 drafts = 50 regular tobacco products;
1100 mAh = 1100 pulls = 60 regular tobacco products.

However, you need to understand that high-power batteries (over 650 mAh) are a double-edged sword. On the one hand, their charge lasts for a long time, on the other hand, they take longer to charge, which is not always convenient. In addition, large batteries lose capacity over time. In general, everyone must decide for themselves.

It is recommended to carry spare batteries with you just in case to avoid unpleasant situations.

We must remember that the battery is designed for 300-500 full charge cycles (this is enough for about a year), after which it must be replaced with a new one.

Precautions when using electronic cigarettes

Care and proper maintenance will significantly extend the life of your vape. To ensure that it does not overheat, deteriorate or fail prematurely, the following rules should be observed:

The electronic device cannot be used at zero temperatures, and the manufacturer does not recommend using the vape at temperatures exceeding 45 degrees.
Vape should not be used in high humidity. This can cause irreparable damage to the parts of the electronic cigarette and affect the performance of the battery. It is also prohibited to leave the device in direct sunlight or in an excessively heated or cooled room.
You cannot repair your vape at home yourself. Any work on a broken device must be carried out by a specialist.
It is forbidden to select parts for the device on a whim. Components for an electronic cigarette must be selected by a technician at a service center; often, independent replacement of parts with unsuitable ones ends in damage to the vape.

Refilling the vape as needed, regularly replacing necessary parts and following safety rules will make using the iJust 2 comfortable and extend the life of the device.

It is very important to purchase high-quality vaping devices, batteries and chargers for them. Statistics show that Chinese-made charging devices and “batteries” tend not only to fail, but also to catch fire from time to time

Take care of your safety, purchase only branded and proven devices

Statistics show that Chinese-made charging devices and “batteries” tend not only to fail, but also to catch fire from time to time. Take care of your safety, purchase only branded and proven devices.

How long does it take to charge an electronic cigarette?

If you have properly overclocked the battery, then 2 hours will be enough to charge it. You can charge the battery as needed. For example, connecting a cigarette that you only use at home to a charger costs 10-15% more energy. And if you are planning a trip or going to a party, then even with a 50% charge, additional recharge will not hurt.

Experienced vapers are advised to always have a spare battery on hand to avoid any unforeseen situations. The price of batteries is affordable, and such “insurance” will never be superfluous.

The electronic cigarette is no longer considered a new product. Many people already have it. Although not everyone can afford such a pleasure, since the price is somewhat high. An electronic cigarette is a device that simulates smoking tobacco by releasing vapor from the mouth or nose. An electronic device may contain nicotine, which, when smoked, produces a taste sensation and the effect of real tobacco smoke. When purchasing an electronic cigarette, many are interested in the question of how long to charge it. Electronic cigarettes are developed based on traditional cigarettes.

Available in the form of cigarettes, cigars, smoking pipes, mods. At the heart of the electronic cigarette device is an evaporator (steam generator), which is often called an atomizer. In the middle of this item there is a nichrome spiral, which, when split, turns the liquid contained inside into a thick vapor similar to tobacco smoke. Modern electronic cigarettes have batteries for charging. They are small batteries. The higher the battery capacity, the longer the cigarette can work.

Battery capacity ranges from 80 mAh to 1000 mAh, some modern models contain about 3000 mAh. A new battery should charge in about four hours, with subsequent charges taking two to three hours. One battery can be charged about 300 times. An electronic cigarette is a unique device that allows you to get maximum pleasure while smoking. There is absolutely no combustion process in it. Such smoking is not harmful, since the electronic cigarette does not contain harmful substances. The electronic cigarette is very convenient and easy to use. The product is environmentally friendly and harmless. Pleasant smoking without harm to health is the dream of every smoker.

Date: October 20, 2012

How to charge a disposable e-cigarette

To do this, you will need ordinary tweezers, a syringe, a mobile phone charger, wire clamps, a tester or diode light bulb with symbols, a soldering iron and smoking liquid.

Remove the mouthpiece, then carefully remove the remaining parts of the cigarette with tweezers: battery, atomizer (clearomizer) and padding polyester with wick. Take the charging plug from under your mobile phone, cut it and solder the clamps to the wires. Next, you need to indicate the polarity of the wires from the charger. Connect the plus and minus to the wires and set the tester to measure DC voltage. Now look at the tester readings - if the device shows the presence of voltage, then the wires are connected correctly - to the “pluses” and “minuses”, respectively

If, on the contrary, the indicator is negative, then the wires are connected incorrectly. The same can be done with the LED - connect it to the charger, and plug the charger into a power outlet. If the light bulb lights up, then the poles match. Connect the charging clamps to the poles of the e-cigarette battery in accordance with the polarity. Turn on the charger, as a rule, the battery charges in about 3 hours. This is how long you need to charge your e-cigarette - in any case, the mains charging will automatically stop supplying the current. In order to pour liquid into the ES, you just need to pour it in using a syringe. Carefully put all the parts of the cigarette back together. It is ready for use again.

Of course, this method is a little problematic and requires time and sleight of hand, but the alternative to saving on cigarettes is much more attractive. And you also need to take into account how long an electronic cigarette should be charged - each device model has an individual charging time.

If you follow all the above rules, you can be convinced that it is not at all difficult to use your e-cigarette wisely and enjoy it twice as long as usual.

From our video you will learn a lot of useful information about how to charge an e-cig.

Step-by-step instruction

First, you need to completely disassemble the disposable vaping device. The crane should approach this stage responsibly. Do not damage the outer casing, wiring or contacts. Pinch the mouthpiece with your fingers and try to pull it out without applying excessive force. Using tweezers, preferably thin ones, pull out the “insides” of the ES.
At the next stage, you need to provide a charge to your disposable ES. During the first operation, it probably managed to discharge. To do this, we cut off the plug from a pre-purchased charger, remove the insulation at the ends of the wire and solder two clamps.
Now you need to determine the polarity of your charger. To do this, you can use a tester on which we set the voltage measurement mode. Attach the clamps to the two wires of the tester, “minus” and “plus,” and plug the charger into the mains. If the tester shows a positive voltage, then you guessed the polarity and connected “+” and “–” correctly.

If you don't have a voltage tester at your disposal, you can use a regular LED with markings.

You need to connect it to the charger. If the polarity matches, it will light up.

Attach the clamps to the ES battery. The charging process will last about 3 hours.
At the last stage, the simplest thing left is to fill the cartridge with e-liquid for vaping. For this you will need a regular medical syringe.
We assemble the device and can enjoy the vaping process. As you can see, everything is quite simple.

The danger of charging with homemade and counterfeit devices

The only advantage of such a charging system is the absence of additional holes and joints on the power supply housing and its compact size.

Minuses:

The first disadvantage is the need to disassemble the device every time it is charged.
Another disadvantage is the mandatory presence of a special charger.
And the last drawback is the inability to use the device while charging.

Pros:

Versatility and accessibility. Almost everyone has a cable with a micro-USB connector.
There is no need to disassemble the device to charge it.
On a number of devices with a micro-USB connector, there is a hovering function while charging.

The objective disadvantage of charging via USB is that not all devices powered by more than one 18650 battery cannot be adequately recharged in this way.

Most electronic boards installed in e-cigarette mods with a power of 150 watts or more are not able to cope with charging the batteries inside the device, since charging two or three 18650 batteries can overheat and burn the board.

Therefore, even if such an electronic mod has a micro-USB connector, its batteries must be charged in an external charger. Some manufacturers specifically include a clause in the instructions that says “The micro-USB connector is intended exclusively for software updates.”

External devices for recharging batteries usually operate “from a wall outlet”, since they require more voltage to charge several 18650 batteries at once. In such charging stations, special electronics are installed that fully control the process and make it as high quality as possible.

The Efest LUC V4 charger is a universal station for powering batteries of different sizes. You can install different types of batteries at the same time. The gadget is equipped with all kinds of protections that prevent unpleasant situations when charging the battery. The charger is compact in size, so it will not take up much space in your bag or on your desktop.

Pros:

An external charger, equipped with the necessary electronics, recharges as correctly as possible, increasing the service life of the batteries.
Externally charged batteries have the same voltage, which ensures better performance.
If you have more than one set of batteries for your device, you can charge the batteries “in reserve.”

Minuses:

This charging method requires an outlet, which is not always convenient.
The devices are relatively large in size and are really inconvenient to carry around.

Micro-USB connector

Most modern electronic cigarette power sources are charged via the micro-USB connector. The convenience and versatility of this scheme are so great that it is used both on pen-style cigarettes and box mods. A USB charging connector is installed in such devices as: Eleaf iJust 3, Ehpro Evok 80, Kanger Kbox 200W.

Versatility and accessibility. Almost everyone has a cable with a micro-USB connector.
There is no need to disassemble the device to charge it.
On a number of devices with a micro-USB connector, there is a hovering function while charging.

The objective disadvantage of charging via USB is that not all devices powered by more than one 18650 battery cannot be adequately recharged in this way.

How to refill a vape

Before you start using it, you must properly assemble the device and purchase liquid for it. The tank for the manual has a capacity of 5.5 ml, which is exactly the volume of refill you should buy for the first time.

Before refueling, you should read the iJust 2 instructions in Russian to clearly understand the structure of the gadget. Refueling has several stages:

1. The mod must be disassembled, carefully handling the glass flask. On top of the liquid tank there are two channels into which the liquid is poured. Parts of the device can be damaged by careless handling, so all actions must be careful.

2. The evaporator (atomizer) must be disconnected from the main body of the device

To do this, turn the part clockwise and carefully remove it. If twisting is quite difficult, you should not apply force, it is better to continue to do it gradually and carefully

3. The initial errors of the vape device should be eliminated. The vaporizer of this model of electronic cigarettes has certain features of the device, as a result of which the liquid begins to burn and taste bitter when you start using it. To prevent this problem, you should find holes for pouring liquid and carefully pierce them with a thin needle. The evaporator requires at least 6 - 7 punctures in each hole. Experienced steamers advise not to start using the device without this precaution - there is a risk of damaging it even before you start using it. A vape that produces smoke and bitterness requires replacement of structural parts and investments at the very first stage of use.

4. The atomizer cotton wool must be gradually saturated drop by drop with vape refill. The steamer needs to achieve such a level of saturation of the cotton wool with liquid so that a new portion is no longer absorbed into the material. Particular attention should be paid to the mesh, side and internal holes. A larger amount of moisture will not damage the device, but a lack of liquid will give a bitter taste and burning of the material.

5 After the cotton wool is completely saturated with the dressing, you can begin the process of pouring liquid into the flask. The spout of the bottle with refill must be carefully inserted into the opening of the tank and the required amount of product must be poured. The volume of liquid filled at one time varies and cannot be accurately calculated: you can fill a few drops of the substance and fill the tank to the limit (5.5 ml). A full flask will be enough to vape until approximately the end of the vape battery charge. 6.

7. Now you need to close the tank for filling the liquid and screw on the parts removed from it. There should be no leakage from the flask, and all components of the mod must be checked for tight fit to each other. After this, you need to connect the lithium battery to the clearomizer, completing the assembly.

If the vape is working for the first time or its evaporator has been replaced, after soaking the cotton wool, you need to wait 5 - 10 minutes and try to drip a little more liquid onto it. Only after this should you continue refueling the device.

Second and subsequent battery charges

The condition for long and uninterrupted operation of an electronic cigarette is the correct choice of battery. The latter must correspond to the existing ES model. Contacts, fastenings, dimensions must match

You also need to take into account:

Maximum current. This indicator indicates the maximum charging power. If this condition is not met, the battery may break.
Capacity. This indicator determines the battery life without recharging. The larger the capacity, the less often you will need to charge the mod, which increases its service life.

The subsequent battery charge is no less important.

The process is carried out as follows:

Unscrew the battery from the clearomizer;
Connect the battery to the charger;
Plug in the charger and check if it is charging. As mentioned above, the indicator may change color or start flashing.

How to understand that an electronic cigarette is charged - when the color on the battery indicator changes, it means the battery is fully charged. And don’t forget about the instructions, because each device has its own.

There are important points that will tell you how to properly charge an electronic cigarette so that it serves you for a long time:

Do not leave the battery on charge all night - this will not improve the quality of its operation, but on the contrary, it will shorten its service life;
Try to fully charge the battery whenever possible until the corresponding indicator signal appears;
If you charge the battery very often, it will also quickly fail and stop holding a charge;
The lower the ambient temperature and the higher the humidity, the lower the battery productivity and its shelf life;
During periods when you do not plan to use your e-cigarette for a long time, disconnect the battery from it. This way you will protect yourself from premature repair of the entire device.

First battery charge.

Owners need to know that the electronic cigarette is designed for approximately 500 – 850 charging cycles. Depending on the brand and proper use, this figure can be a thousand times. An important point that affects the entire service life is the process of first charging the device. It kind of “awakens” the battery to operate for the entire service life of the device. The first charge should only be carried out when the battery is completely discharged, this is indicated by a light signal. And make the first charge until the battery is completely filled, which is also indicated by the light indicator.

Results

How do you know if your vape is charged? Once the battery is fully charged, the indicator light will either go off or change color.

To extend the life of your e-cigarette, there are just a few things to remember:

If the device produces little steam, or the indicator light begins to blink, then it is worth putting your device on charge.
It is recommended to both replenish the charge and use it completely, especially for devices with a large battery capacity.
If this is the first recharge of the device, then it should last at least 8 hours after complete discharge.

Just three simple rules will allow you to enjoy your favorite vaping process much longer without harming your electronic cigarette.